Lat Pull Down Attachment for G6S & XF10 | 247 Gym Equipment

$210.00 $170.00

You can receive the package between June 09 and June 11

Fast delivery Same day dispatch
📦 Archerfield Brisbane Depot 📦 Derrimut Melbourne Depot
Ready for pick up in 1 business day

Note for personalization

In Stock — Sydney Warehouse 🏋️ On Display — Milperra Showroom 📐 50×70 Uprights | 20mm Pins 🔧 Sydney Metro Installation Available 🚚 Fast Australia-Wide Freight

Lat Pull Down Bench Attachment Fits G6S All-In-One & XF10 (XC10) Functional Trainer | Heavy-Duty Back Station | Australia

The Lat Pull Down Bench Attachment is a purpose-built seat designed exclusively for the G6S All-In-One Functional Smith Machine and the XF10 (XC10) Functional Trainer. (50mm x 70mm uprights with 20mm pin system).If you own either of these machines and want a dedicated, stable base for lat pulldowns, seated cable rows and overhead pressing, this is the missing piece. Constructed from industrial reinforced steel with a matte black powder coat finish, it installs in seconds via a quick-release safety pin-lock and locks your lower body in place with dual high-density foam leg rollers — allowing you to pull weights exceeding your own bodyweight without lifting off the seat. Available in Sydney with fast freight Australia-wide.

11KG Shipping Weight
2 Foam Leg Rollers
2SEC Pin-Lock Install
2IN 1 G6S & XF10 Compatible

Compatibility

Fits Your Machine. No Modifications Required.

🏗️
G6S All-In-One Functional Smith Machine Custom-engineered fit for the G6S series. Slots directly into the rack with zero wobble — secure, integrated feel from the first rep.
⚙️
XF10 (XC10) Functional Trainer Precision-matched for the XF10 and XC10 frames (50mm x 70mm uprights with 20mm pin system). No adapters, no loose fittings — designed to feel like part of the original machine.
Why does fit matter so much for a lat pulldown seat?
A loose or generic seat creates lateral movement when pulling at peak load — causing energy loss, poor form and joint stress. This attachment is machined to the exact contact points of the G6S and XF10 frames, eliminating flex and allowing you to focus entirely on loading the target muscle rather than stabilising the seat.

Key Features

Built for Heavy Pulling

🎯
Precision Compatibility Custom-fit for G6S and XF10 (XC10) only — no wobble, no loose fittings, no DIY workarounds. Integrates seamlessly with the original frame geometry.
🦵
Dual High-Density Foam Leg Rollers Lock your lower body in place and pull weights exceeding your own bodyweight without lifting off the seat — the key limitation of generic lat seat alternatives.
🏗️
Industrial Reinforced Steel Commercial-grade heavy-duty steel construction engineered to handle the high-tension loads of functional trainers without flex or fatigue under sustained use.
🎨
Matte Black Powder Coat Finish Premium scratch, sweat and corrosion-resistant finish — matches the aesthetic of the G6S and XF10 and withstands daily gym use without chipping or fading.
⚡
Quick-Release Safety Pin-Lock Install or remove in seconds — purpose-built for fast-paced supersets, circuit training and PT studio environments where transitions between exercises matter.
💺
Ergonomic High-Density Padding Tear-resistant foam provides firm, consistent support under heavy eccentric loading — reduces hip and lower back strain during high-volume pulling sessions.
📐
Space-Efficient Footprint Adds professional back-training capability to your G6S or XF10 without occupying additional floor space — ideal for garage gyms and compact PT studios.
🔄
Multi-Exercise Versatility Not just for lat pulldowns — use it as a stable base for seated cable rows, face pulls, overhead cable pressing and a full range of upper-body cable drills.

What Can You Train With This Attachment?

Exercise Guide

Back — Primary Target

  • Lat pulldown (wide grip bar)
  • Lat pulldown (narrow/neutral grip)
  • Seated low cable row (V-bar)
  • Single-arm cable row
  • Straight-arm cable pulldown

Shoulders & Upper Back

  • Seated overhead cable press
  • Face pull (rope)
  • Upright row (straight bar)
  • Cable rear delt fly
  • Band pull-apart (seated)

Biceps & Arms

  • Cable bicep curl (straight bar)
  • Cable bicep curl (rope)
  • Seated single-arm curl
  • Hammer curl (rope)
  • Reverse curl (straight bar)

Core & Functional

  • Seated cable crunch (rope)
  • Pallof press (anti-rotation)
  • Seated cable woodchop
  • High-to-low cable rotation
  • Seated core stabilisation drills

Specifications

Technical Details

Compatibility G6S All-In-One Functional Smith Machine & XF10 (XC10) Functional Trainer
Material Heavy-Duty Industrial Reinforced Steel
Finish Matte Black Powder Coat — scratch, sweat and corrosion resistant
Locking Mechanism Quick-Release Safety Pin-Lock
Leg Support Dual Adjustable High-Density Foam Rollers
Padding High-Density Tear-Resistant Foam — firm support under heavy eccentric loading
Primary Use Lat Pulldowns, Seated Cable Rows, Overhead Cable Pressing
Shipping Weight 11.0 kg
Shipping Dimensions 740mm (L) × 465mm (W) × 165mm (H)
Cubic Volume 0.0568 m³
Delivery Australia-wide freight — Sydney, Melbourne, Brisbane, Adelaide, Perth

Honest Assessment

Pros & Cons

✓ Pros
  • Precision fit for G6S and XF10 (XC10) — no modifications, no adapters
  • Dual foam leg rollers allow pulling beyond bodyweight — a key advantage over generic seats
  • Industrial reinforced steel — engineered for commercial functional trainer loads
  • Quick-release pin-lock installs and removes in seconds
  • Matte black powder coat finish resists scratches, sweat and corrosion
  • High-density ergonomic padding reduces hip and lower back strain
  • Space-efficient — no extra floor footprint on your G6S or XF10
  • Versatile — usable for rows, overhead pressing and cable drills beyond pulldowns
✗ Cons
  • Compatible with G6S and XF10 (XC10) only — not a universal lat seat
  • Does not include a cable attachment bar — requires existing bar from your machine
  • Shipping weight of 11kg — check delivery access for upper-floor installations
  • Not suitable for outdoor or uncovered gym environments
Who Is This Best For?

The Right Attachment For

  • G6S owners who want a dedicated back station — unlock the full pulling capability of your G6S without improvising with generic seating
  • XF10 (XC10) users serious about lat training — a stable, locked-in base makes a measurable difference to load capacity and back muscle isolation
  • Home gym athletes targeting back hypertrophy — the dual roller system enables heavier lat pulldown loads than any non-integrated seat alternative
  • PT studios and commercial facilities — pin-lock rapid transition is purpose-built for client changeovers and circuit training environments
  • Anyone performing high-volume cable back work — ergonomic padding and rigid stability support long pulling sessions without hip or lower back fatigue

See It in Sydney
📍
On Display — Milperra Showroom 10/202 Milperra Road, Milperra NSW 2214 — inspect the build quality, test the pin-lock and compare alongside the G6S and XF10 machines in person 📍 Get Directions
🕘
Showroom Hours Mon–Fri 9am–5pm · Closed Saturday & Sunday Expert team on-site to confirm compatibility with your exact machine model and configuration
🔧
Compatibility Advice Unsure if this fits your machine? Contact us before ordering — our team will confirm compatibility with your exact G6S or XF10 model
Delivery & Freight
🚚 Australia-Wide Freight Tracked freight to Sydney, Melbourne, Brisbane, Adelaide, Perth and regional areas. Securely packaged for damage-free transit
🏪 Depot Pickup Available Sydney (Milperra NSW) · Melbourne · Brisbane · Adelaide depots — contact us to arrange collection
📦 Shipping Specs 11.0 kg · 740mm × 465mm × 165mm · 0.0568 m³ — compact enough for standard courier freight nationwide
Complete Your Setup

Frequently Bought Together

🏗️ G6S All-In-One Smith Machine → ⚙️ XF10 (XC10) Functional Trainer → ⚫ Olympic Weight Plates → 🟫 Rubber Gym Flooring →

Frequently Asked Questions

Common Questions

Yes — this attachment is precision-engineered exclusively for the G6S All-In-One Functional Smith Machine and the XF10 (XC10) Functional Trainer. It is not a universal lat seat. Every contact point is machined to the exact frame geometry of these two models, so it installs with no wobble, no adapters and no modifications. If you are unsure of your exact model number, contact us before ordering and our team will confirm compatibility.
A standard adjustable bench positioned under the cable does not provide the fixed lower-body anchor required for heavy lat pulldowns. Without leg rollers locking you down, you can only effectively pull up to your own bodyweight before you lift off the seat. The dual foam leg rollers on this attachment solve this by anchoring your thighs, allowing you to overload the lat pulldown movement with weights significantly exceeding your own body mass — a critical requirement for progressive back hypertrophy. Additionally, the precision fit to the G6S and XF10 frame eliminates lateral seat movement that occurs when using a free-standing bench.
The quick-release safety pin-lock mechanism allows full installation or removal in approximately 2 seconds — align the attachment with the machine's receiver, insert the pin, and you are ready to train. No tools are required. This makes it ideal for PT studios and circuit training environments where rapid transitions between exercises or clients are essential. The pin-lock is a safety-rated mechanism, not a friction fit — it stays fully secure under the high-tension loads of heavy cable training.
The primary use is lat pulldowns in all grip variations — wide, narrow, neutral and reverse. Beyond that, it functions as a stable seated base for seated cable rows, face pulls, overhead cable pressing, cable bicep curls, cable crunches and Pallof press variations. Any seated upper-body cable exercise that benefits from a fixed, anchored position can be performed with this attachment on the G6S or XF10. It is not a leg extension or leg curl seat — it is specifically designed for pulling and pressing cable movements.
Yes. The attachment is constructed from industrial reinforced steel and engineered to handle the full tension loads of commercial functional trainers under sustained multi-user use. The matte black powder coat finish is formulated to resist the scratches, sweat exposure and surface abrasion of daily commercial gym environments. The high-density tear-resistant padding is specified for heavy eccentric loading rather than light recreational use. For multi-unit commercial orders or PT studio configurations, contact us for availability and volume pricing.
The lat seat attachment does not include a cable bar. Your G6S or XF10 machine already includes a lat pulldown bar and a full set of cable attachments as part of the original purchase. This product is the seat and leg roller assembly only — the component that allows you to use those existing attachments properly for seated pulling exercises. If you need additional cable attachments such as a V-grip row handle, rope or stirrup handles, these are available separately on our website.
The attachment is built to handle the full high-tension loads of commercial functional trainers including the G6S and XF10 cable stacks. The industrial reinforced steel frame is engineered specifically for the pulling forces generated during heavy lat pulldowns and seated rows — not rated for a specific kg figure in isolation, but tested and designed to match the load capacity of the machines it is built for. The dual foam leg rollers are rated to anchor a user while pulling at the maximum stack resistance of the XF10 and G6S cable systems.
Yes — the lat pulldown bench attachment is on display at our Milperra Sydney showroom at 10/202 Milperra Road, Milperra NSW 2214. You can inspect the steel construction, test the pin-lock mechanism and see how it integrates with the G6S and XF10 frames in person. Showroom hours are Mon–Fri 9am–5pm and Saturday 9am–1pm. Our team is on-site to answer compatibility questions and help you confirm it suits your exact machine configuration before purchasing.
Lat Pulldown Bench Attachment — Delivery Areas Australia:
Sydney (NSW) · Parramatta · Bankstown · Liverpool · Penrith · Blacktown · Campbelltown · Bondi · Chatswood · Castle Hill · Northern Beaches · Manly · North Sydney · Inner West · Sutherland Shire · Eastern Suburbs · Ryde · Melbourne (VIC) · Richmond · Brunswick · Essendon · Frankston · Dandenong · Geelong · Brisbane (QLD) · Fortitude Valley · Gold Coast · Sunshine Coast · Toowoomba · Adelaide (SA) · Glenelg · Norwood · Perth (WA) · Canberra (ACT) · Wollongong (NSW) · Newcastle (NSW) · Hobart (TAS) · Darwin (NT)

🚚 Shipping

Australia-wide delivery

  • Under 40 kg: Shipped via our standard courier partners.
  • 40 kg and above: Shipped on a pallet via freight carriers.
  • Tail-lift delivery: Available for residential addresses without forklift access.
  • Approx. packaged weight: 50 kg (varies by product/configuration).

Depot & Pick-up Options

  • Nearest-depot option: We have 500+ freight depots across Australia and will allocate the closest depot for convenient pick-up.
  • Depot pick-up (capital cities): $200 flat fee in Sydney, Melbourne, Brisbane & Adelaide (up to 300 kg).

Installation

  • Sydney Metro installation: Offered — contact us to book.
  • Note: Installation, assembly, and call-out fees are non-refundable.

Secure Packing All items are securely packed on pallets for safe, damage-free transit.

💬 Looking for the best shipping rate? We always try to find you the most cost-effective option. 👉 WhatsApp us or Email us to get a tailored quote.

🎉 Limited-Time Offer: Enjoy Free Sydney Metro Delivery on all orders over $2,500. Fast and reliable delivery straight to your door.

Pay with

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Your transaction is protected with advanced security measures to keep your information confidential

247 Gym Equipment Lat Pull Down Bench Attachment with dual foam leg rollers and black powder-coated steel frame for G6S and XF10 functional trainers.

Lat Pull Down Attachment for G6S & XF10 | 247 Gym Equipment

$210.00 $170.00
$210.00 $170.00

Why Choose 24/7 Gym Equipment?

Better Price. Better Service. 24-Hour Dispatch. > While other sellers keep you waiting with "pre-orders" and slow freight, we dispatch from our Sydney warehouse within 24 hours. Whether you are in Melbourne, Brisbane, or Adelaide, we ensure your gear is on the road immediately. In Sydney? Our expert team provides affordable assembly so your gym is ready to use the day it arrives. Get commercial-grade quality from an Australian-owned team that moves as fast as you do.

24/7 Gym Equipment
Others Gym Seller
24-Hour Dispatch Australia-Wide
Affordable Assembly Sydney Metro
Stock Ready to Ship
Click & Collect from Depots
Commercial-Grade Quality
Showroom Support & Advice
Bundle Discounts

Text columns with images

Strength Equipment

Power racks, Smith machines, functional trainers.

Cardio Equipment

Treadmills, rowers, bikes — built for home & commercial gyms.

Weights & Barbells

Olympic bars, plates, dumbbells & kettlebells.

Storage & Flooring

Racks, gym mats, flooring tiles — keep your space organised.

FAQs

Yes, 24/7 Gym Equipment delivers Australia-wide to all states and territories, including Sydney, Melbourne, Brisbane, Adelaide, Perth, Hobart, Darwin, and Canberra. We use trusted freight partners to ensure your equipment arrives safely. Sydney metro customers also have the option of professional in-home installation or direct warehouse pick-up.

We accept all major credit and debit cards, PayPal, Zip Pay, and PayPal Pay in 4. Buy-now-pay-later options like Zip and PayPal Pay in 4 make it easy to invest in quality gym equipment for your home gym or commercial facility without paying the full amount upfront.

Delivery costs for gym equipment in Australia depend on the size and weight of the product and your location. Lightweight items and smaller orders are generally more affordable to ship, while large commercial gym machines may require a custom freight quote. You can calculate your exact shipping cost at checkout, or contact our team directly for a tailored delivery quote.

All gym equipment sold by 24/7 Gym Equipment includes a manufacturer's warranty. Warranty periods and coverage vary depending on the product — from strength machines and functional trainers to cardio equipment and weights. Full warranty details are listed on each individual product page so you know exactly what is covered before you buy.

Yes, professional gym equipment assembly is available for customers in the Sydney metro area at an affordable rate. For customers in Melbourne, Brisbane, Adelaide, Perth, and other locations across Australia, all equipment is shipped flat-packed with detailed, step-by-step assembly instructions included.

We offer a 14-day money-back guarantee. Simply return the product in original condition (return freight costs apply).

We offer depot pick-up at locations in Sydney, Melbourne, Brisbane and Adelaide. This is a great option if you want to avoid freight costs or need your equipment quickly. Simply select "Depot Pick-Up" at checkout and choose your nearest city.

Yes, most gym equipment sold by 24/7 Gym Equipment is commercial-grade, built to meet the demands of commercial gyms, fitness studios, PT studios, and high-use training environments. We also offer a range of compact, high-quality home gym equipment suitable for residential customers, apartment gyms, and garage setups across Australia.