Barbells Australia | 15kg-20kg Olympic & Standard Bars

12 products

Olympic Tricep Bar 10kg with parallel neutral grips and 50mm sleeves for home gym Australia- 24/7 Gym Equipment

Close up of rubberised knurled grips on hammer curl bar for non-slip tricep training - 24/7 Gym Equipment

Tricep Bar - Olympic - 24/7 Gym Equipment

Olympic Tricep Bar – Heavy-Duty Hammer Curl Bar

🚚 In Stock – Ready to Ship

(0)

~~$210.00~~ $98.00

Olympic Tricep Bar – Heavy-Duty Hammer Curl Bar

Build stronger arms and enhance your upper body workouts without wrist pain.

What is an Olympic Tricep Bar?
The Olympic Tricep Bar (often called a Hammer Curl Bar) is a specialty barbell featuring vertical parallel grips. This neutral hand position keeps your wrists aligned, reducing strain on your elbows during heavy isolation movements like skull crushers, tricep extensions, and hammer curls.

Whether you're training at home or outfitting a commercial gym in Sydney, Melbourne, Brisbane or beyond, this barbell is engineered for serious results. Unlike standard bars, our model features rubberised knurling for superior grip even when sweaty.

✅ Key Features – Tricep Bar Australia

Neutral Grip for Wrist Comfort: The vertical parallel grips support natural wrist alignment. This allows you to lift heavier loads on tricep extensions without the joint pain often caused by straight bars.
Heavy-Duty Steel Build: Constructed from solid steel and finished in high-quality chrome, this bar resists rust and corrosion—essential for Australian garage gyms.
Rubberised Knurled Grips: We have upgraded the handles with rubberised knurling to ensure a secure, non-slip grip during intense lifting sessions.
Olympic-Sized Sleeves (50mm): Fully compatible with all standard Olympic weight plates (bumper or iron), ensuring it fits your existing gym setup.
Compact & Powerful: At 860mm in length and roughly 10kg in weight, this bar is easy to store but handles an incredible 227kg (500lbs) load.

📐 Product Specifications

Length	860mm
Grip Width	25mm (Standard)
Bar Weight	10kg (approx)
Sleeve Diameter	50mm (Olympic Standard)
Max Load Capacity	227kg (500lbs)
Knurling	Rubberised Centre Grips

💪 Top Exercises for Mass

This bar is versatile for targeting the upper body:

Skull Crushers (Lying Tricep Extensions): The primary mass builder for the long head of the tricep.
Hammer Curls: Target the brachialis and forearms for thicker-looking arms.
Close Grip Bench Press: A chest press variation that reduces shoulder rotation.
Overhead Press: A neutral-grip shoulder press ideal for those with rotator cuff issues.

Frequently Asked Questions

What is the difference between a Tricep Bar and an EZ Curl Bar?

A Tricep Bar has vertical (parallel) handles, providing a completely neutral grip. An EZ Curl Bar has angled grips. The Tricep Bar is generally superior for "Hammer" style movements and maximum tricep isolation with zero wrist rotation.

Can I use standard plates on this bar?

No, this is an Olympic Tricep Bar. It requires Olympic weight plates with a 50mm (2-inch) centre hole. Standard 25mm plates will not fit.

Why buy from 247 Gym Equipment?

We offer commercial-grade quality trusted by gyms across Australia. Plus, enjoy fast shipping or easy Click & Collect from our Milperra showroom.

🚀 Ready to Upgrade Your Arm Training?

Don't settle for wrist pain. Add the Olympic Tricep Bar to your cart today and start building serious upper body strength.

Commercial Olympic EZ Curl Bar with 50mm sleeves and chrome finish for bicep curls and tricep extensions.

Close-up of 50mm Olympic barbell sleeve on an EZ curl bar, showing precision-machined steel for standard weight plates.

Cambered barbell design showing the ergonomic Z-shape angles for reduced wrist strain during arm training.

Commercial Olympic EZ Curl Bar — 28mm Knurled Grip, 180kg, 50mm Olympic Sleeves | Bicep Curl Bar Australia

🚚 In Stock – Ready to Ship

(2)

~~$380.00~~ $195.00

In Stock — NSW Warehouse ⭐ 4.8/5 — 61 Reviews 🏋️ 180kg Load Capacity 28mm Knurled Grip 🚚 Australia-Wide Delivery

The Commercial Olympic EZ Curl Bar — 28mm Knurled Grip, 180kg, 50mm Olympic Sleeves — also called an Olympic EZ bar, cambered barbell, bicep curl bar, skull crusher barbell or preacher curl bar — is built for serious arm training in home gyms, PT studios and commercial facilities across Australia. The 28mm knurled grip provides a secure, slip-free hold across all hand sizes. The 50mm Olympic sleeves fit all standard Olympic plates without adapters and rack on any standard power rack. With a 180kg load capacity and hard chrome finish, the angled cambered design places your wrists in a semi-supinated, natural position — reducing joint stress during bicep curls, tricep extensions and skull crushers compared to a straight bar. At 1400mm total length and 13.6kg, it is rackable on all standard power racks.

180KGLoad Capacity

28MMKnurled Grip

50MMOlympic Sleeves

13.6KGBar Weight

Why the cambered EZ bar grip matters for wrist and elbow health:
A straight bar forces full supination (palms completely up) throughout the entire curl — a position the radioulnar joint handles poorly under heavy loads, especially for lifters with pre-existing wrist or elbow sensitivity. The EZ Curl Bar's angled cambered design keeps your wrists in a semi-supinated, neutral position — the same grip angle sports medicine professionals recommend. This is why the EZ bar is the default curl bar in most commercial gyms, and why most experienced lifters choose it for skull crushers over a straight bar.

Construction & Design

4 Things That Make This Bar Commercial Grade

Cambered Angled Grip — Wrist Relief by Design The Z-shaped cambered angles encourage a semi-supinated, natural wrist position during curls and extensions. This directly reduces torque on the wrist and elbow joints — the primary mechanical reason EZ bars are recommended over straight bars for high-volume arm training.

28mm Knurled Grip — Secure Without Skin Damage Medium-aggressive knurling provides a confident, slip-free grip during high-rep curl sets and heavy skull crusher work. 28mm is the standard commercial curl bar grip diameter — comfortable across all hand sizes without tearing skin on long training sessions.

50mm Olympic Sleeves — True Olympic Compatibility Fits all standard Olympic weight plates, bumper plates and rubber-coated plates without adapters. Rackable on all power racks and squat stands with 50mm J-hooks. This is a genuine Olympic EZ curl bar — not a non-Olympic imitation that requires plate adapters.

Hard Chrome Finish — Corrosion Resistant Full hard chrome across shaft and sleeves provides long-term corrosion resistance under Australian conditions — coastal humidity, high-sweat commercial gym environments and garage gyms with temperature variation. Wipes clean, resists pitting and maintains appearance under daily use.

Specifications

Technical Details

Bar Type	Olympic EZ Curl Bar — cambered bicep and tricep bar
Total Length	1400mm
Bar Weight	13.6kg
Grip Diameter	28mm — medium-aggressive knurling
Sleeve Diameter	50mm Olympic standard
Load Capacity	180kg
Grip Style	Multi-angle cambered (EZ curl / Z-bar)
Finish	Hard chrome — shaft and sleeves
Plate Compatibility	All Olympic plates · bumper plates · rubber-coated plates
Power Rack Compatible	Yes — 50mm sleeves, rackable on all standard J-hooks
Grade	Commercial — PT studios, commercial gyms, home gyms
Dispatch	NSW warehouse — fast Australia-wide delivery

Buying Guide

EZ Curl Bar vs Straight Bar — and Olympic vs Standard

Standard vs Olympic EZ curl bar — what is the difference?
A standard EZ curl bar uses 25–30mm sleeves and does not fit Olympic plates or power rack J-hooks without adapters. This is a 50mm Olympic EZ curl bar — the global standard. It fits all Olympic weight plates and racks on any standard power rack. If you own Olympic plates, you need an Olympic EZ curl bar.

Factor	EZ Curl Bar (This Product)	Straight Olympic Bar
Wrist Position During Curls	Semi-supinated — natural, comfortable	Fully supinated — stress on wrist/elbow
Elbow Joint Stress	Lower — angled grip reduces torque	Higher — especially at heavy loads
Peak Bicep Activation	Slightly reduced supination	Maximum supination = slightly higher peak activation
Skull Crushers	More comfortable — preferred grip for most lifters	Standard grip — less wrist-friendly
Preacher Curls	Natural angle for full range of motion	Requires more wrist stability
Upright Rows	Comfortable narrow grip	Narrower grip — more wrist pronation required
Consistency Over Time	Less joint fatigue — easier to train consistently	More joint fatigue at high volumes
Best For	Most lifters — especially wrist/elbow sensitivity	Lifters prioritising peak bicep peak contraction

Training Applications

Exercises for the Olympic EZ Curl Bar

💪

EZ Bar Bicep CurlThe primary use — semi-supinated cambered grip reduces wrist strain while maintaining strong bicep engagement through the full range

💀

Skull Crushers (Lying Tricep Extension)The EZ bar is the preferred skull crusher barbell — the cambered grip is significantly more comfortable at heavy loads than a straight bar

🏋️

Preacher CurlOn a preacher curl bench, the EZ bar's angled grip maintains a natural wrist position for full range of motion without hyperextension at the bottom

🔄

Reverse CurlPronated grip targets the brachialis, brachioradialis and forearm extensors — the EZ cambered angle reduces wrist fatigue during reverse curl sets

🔽

Overhead Tricep ExtensionStanding or seated overhead extension for long-head tricep development — EZ grip eliminates wrist discomfort throughout the overhead range

🔼

Upright RowTargets traps and medial deltoids — narrow cambered grip is more comfortable than straight bar for most lifters during upright rows

🏗️

Close-Grip Bench Press (from Rack)Rackable on all power racks — the 1400mm length and 50mm sleeves allow close-grip pressing directly from J-hooks for heavy tricep development

🔧

Cable Attachment Curl / PushdownConnect to functional trainer or cable machine via clip attachment for guided EZ bar cable curls and tricep pushdowns with the ergonomic cambered grip

Who Is This For?

The Right Bar For

Lifters with wrist or elbow pain from straight bar curls — the semi-supinated cambered grip directly reduces torque on the radioulnar joint; this is the most commonly cited reason experienced lifters switch from a straight bar to an EZ curl bar
Beginners building their first arm training routine — the angled grip is more forgiving from day one, allowing correct form and muscle focus without fighting through joint discomfort
Advanced lifters running heavy skull crusher programming — 180kg capacity handles serious tricep overload work; the EZ grip is the preferred skull crusher barbell for heavy tricep training
PT studios and commercial facilities — hard chrome construction rated for daily multi-client use; the most commonly specified arm training bar in Australian commercial gym fitouts
Home gym owners on Olympic plate systems — true 50mm Olympic sleeves mean no adapters needed; compatible with all Olympic plates, bumper plates and standard power racks already in your setup
Athletes transitioning from cable curls to free weight curls — the EZ bar's natural wrist position closely matches the cable curl grip angle, making the movement pattern transfer easier

Customer Reviews

What Australian Lifters Say — 4.8/5 · 61 Reviews

★★★★★

"Chrome finish is excellent — no rust after 12 months in my garage gym in Brisbane. Knurling is firm enough to hold without tearing up your hands on long sets."

Nathan B.

Home Gym — Brisbane, QLD

★★★★★

"Had wrist pain with a straight bar for years. Switched to this EZ bar and the difference is immediate — I can curl without any discomfort and actually enjoy arm day."

Claire M.

Home Gym — Sydney, NSW

★★★★☆

"Bought for our PT studio in Melbourne. Great build quality, holds up well to daily use. Clients love how much more comfortable it is than the straight bars we had before."

Daniel F.

PT Studio — Melbourne, VIC

Also Known As

Other Names for the EZ Curl Bar

The EZ Curl Bar goes by many names in the fitness industry. All of the following refer to the same type of bar — if you searched for any of these, you are in the right place:

Olympic EZ Curl Bar Olympic Ezy Bar Easy Curl Bar EZ Bar Australia Commercial Curl Bar Cambered Barbell Z-Barbell Bicep Curl Bar Skull Crusher Barbell Preacher Curl Bar Olympic Cambered Bar Angled Barbell for Bicep Curls Knurled Grip Curl Bar EZ Curl Bar 50mm Tricep Bar Olympic Tricep Bar Heavy Duty Curl Bar

Frequently Asked Questions

Common Questions — EZ Curl Bar Australia

What is an EZ curl bar used for?

An EZ curl bar (also called an Olympic EZ bar, cambered barbell or bicep curl bar) is used for bicep curls, skull crushers (lying tricep extensions), preacher curls, reverse curls, overhead tricep extensions, upright rows and close-grip pressing. The cambered angled grip reduces wrist and elbow stress compared to a straight bar, making it suitable for high-volume arm training and heavy tricep work.

Is an EZ curl bar better than a straight bar for bicep curls?

For most lifters, yes. The EZ curl bar's cambered grip places the wrist in a semi-supinated, natural position — reducing torque on the wrist and elbow joints during curls and extensions. A straight bar forces full supination throughout the lift, which produces greater wrist and elbow stress at heavy loads. While a straight bar may offer marginally higher peak bicep activation due to full supination, the EZ bar allows more consistent training volume without joint fatigue, which produces better results over time for most people. For lifters with wrist or elbow issues, the EZ bar is strongly preferred.

What is the difference between an Olympic EZ curl bar and a standard EZ curl bar?

A standard EZ curl bar uses 25–30mm sleeves designed for standard (non-Olympic) 1-inch plates. It is not compatible with Olympic plates or power rack J-hooks without adapters. An Olympic EZ curl bar uses 50mm sleeves — the global standard for Olympic barbells. It fits all Olympic weight plates, bumper plates and rubber-coated plates without adapters, and racks on all standard power racks. This product is an Olympic EZ curl bar with 50mm sleeves.

How much does this EZ curl bar weigh?

This Olympic EZ curl bar weighs 13.6kg. This is heavier than standard non-Olympic EZ bars (which typically weigh 7–10kg) due to the Olympic 50mm sleeve construction and the longer 1400mm bar length. Factor this into your loaded weight calculations — a pair of 10kg plates + 13.6kg bar = 33.6kg total.

Will this EZ curl bar fit on a power rack?

Yes. At 1400mm total length with 50mm Olympic sleeves, this bar is rackable on all standard power racks, squat stands and half racks with standard J-hooks. It can be used for close-grip bench press, skull crushers and preacher curls directly from a rack without any adapters or modifications.

What is the load capacity of this Olympic EZ curl bar?

This bar has a 180kg maximum load capacity — well beyond the working loads used for arm training at any level. This capacity makes it suitable for heavy skull crusher barbell work, close-grip pressing and any other loaded movements where progressive overload calls for significant plate loading.

Can I use this bar on a Smith machine or cable functional trainer?

Yes. Many lifters attach EZ curl bars to cable machines and functional trainers using a clip attachment for cable EZ bar curls and tricep pushdowns — giving you the ergonomic cambered grip angle during guided cable movements. On a Smith machine, the bar can be used for guided curls and skull crushers where the Smith bar path suits the movement.

Is this EZ curl bar suitable for a home garage gym in Australia?

Yes. The hard chrome finish is specifically suited to Australian conditions — including the coastal humidity of QLD, northern NSW and WA where uncoated or poorly finished bars rust quickly. The chrome finish resists pitting and surface oxidation under regular exposure to sweat and humidity. Store the bar on a barbell rack or J-hooks when not in use rather than leaving it on damp concrete to maximise longevity.

How fast is delivery across Australia?

We dispatch from our NSW warehouse via tracked freight. Sydney: 1–2 business days. Melbourne: 1–2 business days. Brisbane: 2–3 business days. Adelaide: 2–3 business days. Gold Coast: 2–3 business days. Perth: 3–5 business days. Regional areas vary — enquire at checkout for your postcode. Pickup is also available at our Milperra NSW warehouse Mon–Fri 9am–5pm and Sat 9am–1pm.

Delivery

Fast Australia-Wide Dispatch from NSW

📦Sydney1–2 business days

📦Melbourne1–2 business days

📦Brisbane2–3 business days

📦Adelaide2–3 business days

📦Gold Coast2–3 business days

📦Newcastle1–2 business days

📦Perth3–5 business days

📦Regional AUEnquire at checkout

Pair It With

Frequently Bought Together

⚫ Olympic Weight Plates → 🏗️ Power Racks & Squat Stands → 🏋️ Dumbbells → 💪 Strength Equipment →

Commercial Olympic EZ Curl Bar Delivery Areas — Australia:
Sydney (NSW) · Parramatta · Bankstown · Liverpool · Penrith · Blacktown · Campbelltown · Bondi · Chatswood · Castle Hill · Northern Beaches · Manly · North Sydney · Inner West · Sutherland Shire · Eastern Suburbs · Ryde · Central Coast · Newcastle · Wollongong · Melbourne (VIC) · Richmond · Brunswick · Essendon · Frankston · Dandenong · Geelong · Ballarat · Brisbane (QLD) · Fortitude Valley · Gold Coast · Sunshine Coast · Toowoomba · Cairns · Townsville · Adelaide (SA) · Glenelg · Norwood · Perth (WA) · Fremantle · Canberra (ACT) · Hobart (TAS) · Darwin (NT)

Olympic 150cm Camo Barbell for technique training showing 28mm knurled grip and 453kg (1000lb) load capacity for Australian home gyms - 24/7 Gym Equipment

Compact 150cm Olympic Barbell – Camo - 24/7 Gym Equipment

Olympic 150cm Camo Technique Barbell — 1.5m Short Bar (453kg Rated)

🚚 In Stock – Ready to Ship

(4)

~~$335.00~~ $165.00

In Stock — Ready to Ship 🏋️ On Display — Milperra Showroom 453KG RATED 🚚 Fast Australia-Wide Delivery

Olympic 150cm Camo Technique Barbell — Short Barbell (1.5m) 453KG / 1000LB Rated | 28mm Shaft | 50mm Sleeves | Compact Home Gym Bar | Australia

The Olympic 150cm Camo Technique Barbell is a compact short barbell built for lifters who need full Olympic performance in a space-constrained training environment. At 1.5m (1500mm) total length — 70cm shorter than a standard 220cm Olympic bar — this short Olympic bar fits garage gyms, basement setups, tight PT studios and small training rooms where a full-length bar cannot be used safely. Despite its compact length, it carries a 453kg (1000lb) load rating, features a 28mm knurled shaft for secure grip during Olympic lifts, and uses the universal 50mm Olympic sleeve standard compatible with all bumper and iron plates. The distinctive camo finish adds a premium aesthetic to any custom gym build. Available for fast delivery to Sydney, Melbourne, Brisbane, Adelaide and Perth.

150cmTotal Bar Length

453KGLoad Capacity

28mmShaft Diameter

50mmOlympic Sleeves

What makes a 150cm short barbell different from a standard Olympic bar?
A standard men's Olympic bar is 220cm long and weighs 20kg. The 150cm short barbell is 70cm shorter — allowing it to fit in spaces, racks and rooms where a standard bar would overhang, hit walls or be unsafe to load. Despite the shorter length, this bar maintains the 50mm Olympic sleeve standard and a 453kg load rating — so plate compatibility and training capacity are not compromised. It is the preferred bar for compact home gyms, basement setups and low-ceiling training rooms across Australia.

Why Choose a Short Olympic Bar?

3 Reasons the 150cm Bar Works

📐 Space-Efficient Length 70cm shorter than a standard Olympic bar — fits garage gyms, basement setups, tight training rooms and spaces where a 220cm bar would overhang or hit walls

🏋️ Olympic Technique Training 28mm shaft and 50mm sleeves match the grip and plate compatibility of a full Olympic bar — perfect for snatch, clean & jerk and technique progression

🎨 Camo Premium Finish Distinctive camo coating — durable, eye-catching and suited to custom gym builds where standard black or chrome bars are too generic

Key Features

Full Olympic Performance in 1.5 Metres

📏

150cm Compact Length — 1500mmFits gym spaces, PT studios and training rooms too tight for a standard 220cm bar — 70cm shorter without sacrificing load capacity or plate compatibility

⚖️

453KG / 1000LB Load RatingHigh-tensile steel construction rated to 453kg — suitable for progressive strength training, Olympic technique work and CrossFit-style loading

✋

28mm Knurled ShaftIndustry-standard 28mm diameter with precision knurling — provides secure, confident grip for snatch, clean, deadlifts and high-rep functional training

🔄

50mm Olympic SleevesUniversal 50mm Olympic sleeve standard — compatible with all bumper plates, cast iron plates and rubber-coated plates from any brand

🎨

Durable Camo FinishPremium camo coating protects the steel shaft from corrosion and wear — distinctive aesthetic for custom gym builds and personalised training spaces

🔩

Steel Construction ThroughoutHigh-tensile steel bar built for repeated use in home gyms, PT studios and commercial facilities — designed for Olympic lifting, CrossFit and general strength work

What Can You Do With a 150cm Olympic Bar?

Full Exercise Library

Olympic Technique Work

Snatch technique & progression
Clean & jerk technique drills
Hang clean & hang snatch
Power clean — position work
Clean pull & snatch pull

Compound Strength

Deadlift (conventional & sumo)
Romanian deadlift (RDL)
Overhead press
Bent-over barbell row
Barbell hip thrust

Rack Work (check rack width)

Back squat (narrow racks only)
Bench press (narrow racks only)
Incline press (narrow racks only)
Rack pull — partial deadlift
Always measure J-hook spacing first

CrossFit & Functional

Barbell cycling (touch & go)
Thrusters
Push press & push jerk
Barbell complex training
High-rep Olympic technique WODs

Specifications

Technical Details

Total Length	150cm (1500mm)
Maximum Load Capacity	453kg / 1000lb
Shaft Diameter	28mm — Olympic technique standard
Sleeve Diameter	50mm — universal Olympic plate standard
Finish	Camo — durable corrosion-resistant coating
Bar Type	Compact short Olympic technique barbell
Rack Compatibility	Check rack internal width — best suited to narrow racks or floor work
Plate Compatibility	All 50mm Olympic plates — bumper plates, iron plates, rubber-coated plates
Best For	Olympic technique training, CrossFit, compact home gyms, PT studios, floor work
Delivery	Australia-wide — Sydney, Melbourne, Brisbane, Adelaide, Perth

Which Bar Length Do You Need?

150cm Short Bar vs 220cm Standard Olympic Bar

Feature	220cm Standard Olympic Bar	150cm This Short Bar
Total Length	220cm — standard gym size	150cm — 70cm shorter
Suitable For Tight Spaces	Requires wide training area	Fits garage, basement, tight rooms
Plate Compatibility	All 50mm Olympic plates	All 50mm Olympic plates
Load Capacity	226KG+ standard	453KG — higher rating
Shaft Diameter	28–29mm standard	28mm
Rack Compatibility	Fits all standard racks	Check internal rack width first
Olympic Technique Training	Full competition-style	Full technique work on floor
Storage & Portability	Requires wall rack or floor storage	Compact — easy to store and transport

Who Is This Best For?

The Right Bar For

Compact home gym & garage gym owners — the 150cm length fits spaces where a 220cm bar would overhang, hit walls or be unsafe to load and unload
Basement & low-ceiling gym setups — shorter bar reduces swing radius during overhead movements in tight vertical spaces
Olympic weightlifting beginners — 28mm shaft and Olympic sleeve sizing matches the feel of a full bar for snatch, clean & jerk technique development
CrossFit athletes in tight spaces — full Olympic sleeve compatibility means all bumper plates work for barbell cycling and WOD training
PT studios with limited floor space — compact short barbell for client technique work without the footprint of a full 220cm bar
Custom gym builders — the distinctive camo finish differentiates a personalised gym build from standard black or chrome bar aesthetics

Visit Our Sydney Showroom

📍

On Display in Sydney 10/202 Milperra Road, Milperra NSW 2214 — compare the 150cm bar against our full 220cm Olympic barbells in person before buying 📍 Get Directions

🕘

Showroom Hours Mon–Fri 9am–5pm · Sat 9am–1pm · Closed Sunday Bring your rack measurements — our team can advise whether the 150cm bar is compatible with your specific setup

🏋️

Expert Barbell Advice Not sure whether a 150cm or 220cm bar suits your space? Our team helps you choose the right bar length for your rack, room and training style

Delivery & Pickup

🚚Fast Australia-Wide DeliverySydney Metro: 1–2 days · Melbourne & Brisbane: 2–3 days · Adelaide & Perth: 3–5 days

📦Securely PackagedBar arrives securely packaged to prevent shaft and sleeve damage during transit — ready to load and train on arrival

🏪Pickup — Milperra NSW10/202 Milperra Road, Milperra NSW 2214 · Mon–Fri 9am–5pm · Sat 9am–1pm

Frequently Bought Together

Complete Your Setup

⚫ Olympic Weight Plates → 🏋️ All Barbells → 🏗️ Power Racks & Squat Racks → 🟫 Rubber Gym Flooring →

Frequently Asked Questions

Common Questions

What is a 150cm short Olympic barbell and who needs one?

A 150cm short Olympic barbell (also called a short bar, compact barbell or technique barbell) is a 1.5m bar — 70cm shorter than a standard 220cm Olympic bar. It uses the same 50mm Olympic sleeve standard and a 28mm shaft, so it trains the same movements and accepts the same plates. It is designed for lifters who cannot safely use a standard bar due to space constraints — garage gyms with narrow walls, basement setups, tight training rooms, or PT studios where floor space is limited.

Is this barbell suitable for Olympic lifting technique — snatch and clean & jerk?

Yes. The 28mm shaft diameter and 50mm Olympic sleeves match the grip feel and plate compatibility of a full competition Olympic bar. The 150cm length is well-suited for technique drilling on the floor — snatch, hang clean, power clean, clean & jerk and their progressions. The 150cm bar is widely used by Olympic weightlifting coaches for beginner and intermediate technique work in space-constrained gyms and PT studios across Australia.

Can I use bumper plates with this bar?

Yes. The 50mm Olympic sleeve standard is compatible with all bumper plates, cast iron Olympic plates and rubber-coated iron plates from any brand — including 24/7 Gym Equipment's full plate range. This is the universal standard used on all commercial gym equipment. Note: Standard 25mm (1-inch) plates will not fit — only 50mm (2-inch) Olympic plates are compatible.

Will a 150cm bar fit in my power rack or squat rack?

It depends on your rack's internal J-hook width. Most standard power racks have an internal width of 100–120cm, designed for 220cm bars. A 150cm bar's sleeves may not reach J-hooks spaced for a standard bar. Always measure your rack's internal width before ordering — if your J-hooks are closer together (narrow racks), the 150cm bar may fit. For wide competition racks, a standard 220cm bar is required. The 150cm bar works perfectly for all floor-based lifts regardless of rack compatibility.

What is the load capacity and is it enough for serious training?

This bar is rated to 453kg (1000lb) — significantly higher than the 226kg rating of a standard 20kg Olympic bar. This capacity is more than sufficient for serious strength training, Olympic lifting technique work and heavy accessory movements. At 453kg, the bar will never be the limiting factor in training — only your strength will be. The high rating reflects the high-tensile steel construction used throughout the shaft and sleeves.

What is the difference between a technique barbell and a short Olympic barbell?

The terms are often used interchangeably, but there is a distinction. A technique barbell traditionally refers to a lightweight bar (5–10kg) used specifically by beginners learning Olympic lift positions without load. A short Olympic barbell (like this 150cm bar) is a full-weight, full-strength bar at standard or near-standard weight, just shorter in total length. This 150cm camo bar is a compact Olympic bar — not a lightweight technique bar — and is fully rated for heavy progressive training.

Is this bar good for a compact home gym or garage gym in Australia?

Yes — this is one of the primary use cases for this bar. Australian garage gyms are often in single-car garages (typically 3m wide) where a 220cm bar would hit the walls or be unsafe to load and unload. At 150cm total length, this bar gives lifters in compact home gyms full Olympic plate compatibility and a 453kg load rating without requiring a wide training space. Pair with rubber gym mats for floor protection during Olympic drops and deadlifts.

How fast is delivery to Sydney, Melbourne and Brisbane?

We dispatch from our Milperra NSW warehouse within 1–2 business days. Sydney Metro: 1–2 business days. Melbourne and Brisbane: 2–3 business days. Adelaide and Perth: 3–5 business days. The bar is securely packaged to prevent shaft and sleeve damage in transit. Pickup is also available at our Milperra warehouse Mon–Fri 9am–5pm and Sat 9am–1pm — where you can compare the 150cm bar against our full 220cm Olympic barbells in person.

Delivery Areas — 150cm Olympic Camo Technique Barbell Australia:
Sydney (NSW) · Parramatta · Bankstown · Liverpool · Penrith · Blacktown · Campbelltown · Bondi · Chatswood · Manly · Mosman · Cronulla · Hornsby · Castle Hill · Northern Beaches · Melbourne (VIC) · Brisbane (QLD) · Adelaide (SA) · Perth (WA) · Canberra (ACT) · Gold Coast · Newcastle · Wollongong · Sunshine Coast · Geelong · Hobart (TAS) · Darwin (NT) · Cairns · Central Coast

15KG Intermediate Olympic Barbell with Chrome Finish – 500LB Load Rating, 8 Needle Bearings, Ideal for CrossFit and Home Gym Training in Australia

Close-up of Chrome Olympic Barbell Knurling and Needle Bearings – Durable 15KG Intermediate Barbell for Weightlifting in Australia 247 gym equipment

Athlete Lifting 15KG Olympic Barbell – High-Performance Chrome Bar for CrossFit and Strength Training Across Australia - 24/7 Gym Equipment

15KG Intermediate Barbell - 8 Bearing (500LB Capacity)

🚚 In Stock – Ready to Ship

(0)

~~$250.00~~ $155.00

15KG Intermediate Olympic Barbell – 8 Needle Bearings

The perfect technical bar for CrossFit, Weightlifting, and Home Gyms.

Who is the 15KG Barbell for?
The 15KG Olympic Barbell (often referred to as a Women's Barbell) features a thinner 25mm shaft diameter compared to the standard 20kg/28mm bar. This makes it the ideal choice for female lifters, youth athletes, or anyone with smaller hands seeking a more secure hook grip during Olympic lifting movements like the Snatch and Clean & Jerk.

Engineered for performance in Sydney, Melbourne, and Brisbane, this bar combines a high-speed spin system with a durable chrome finish. Whether you are outfitting a garage gym or a commercial functional fitness studio, this bar delivers reliable performance for high-repetition workouts.

Key Performance Features

8 Needle Bearing System: Unlike cheaper bushing bars, this model features 4 needle bearings per sleeve (8 total). This provides a smooth, frictionless spin that protects your wrists and elbows during fast turnover movements.
25mm Grip Diameter: The thinner shaft allows for a stronger grip, reducing forearm fatigue and making it easier to maintain technique during long CrossFit WODs.
500LB (226KG) Load Rating: Built to handle progressive overload, this bar is rated for loads up to 226kg, making it suitable for intermediate strength training and daily use.
Hard Chrome Finish: The shaft and sleeves are coated in hard chrome, offering excellent resistance against rust and oxidation in humid Australian conditions.
Hybrid Knurling: Features dual knurl marks for both Olympic Weightlifting (IWF) and Powerlifting (IPF) hand positioning.

Technical Specifications

Bar Weight	15KG (+/- 1%)
Total Length	2010mm
Shaft Diameter	25mm (Women's Standard)
Rotation System	8 Needle Bearings
Max Load Capacity	500LB (226KG)
Sleeve Diameter	50mm (Fits Olympic Plates)
Finish	Hard Chrome

Frequently Asked Questions

What is the difference between a 15kg and 20kg barbell?

The main differences are weight, length, and diameter. A 15kg bar is shorter (201cm vs 220cm) and has a thinner shaft (25mm vs 28mm). This makes the 15kg bar easier to grip for people with smaller hands, which is why it is the standard for female weightlifting competitions.

Is this barbell good for CrossFit?

Yes. The inclusion of 8 needle bearings ensures the sleeves spin fast and smoothly. This is essential for CrossFit movements like cleans, snatches, and thrusters, as it prevents the bar's inertia from twisting your wrists.

Can I use standard weight plates on this bar?

No. This is an Olympic Barbell with 50mm sleeves. It is only compatible with Olympic Bumper Plates or Cast Iron Olympic Plates (which have a 51mm centre hole). Standard "1-inch" plates will not fit.

Does the bar have centre knurling?

No. This bar has no centre knurl. This is preferred for high-rep functional training as it prevents the bar from scraping your neck and collarbone during front rack positions and cleans.

Ready to upgrade your gym?
Order your 15KG Intermediate Olympic Barbell today for fast Australia-wide delivery.

Close-up of 15kg Women's Olympic Barbell showing 25mm black zinc shaft and chrome sleeve with copper bushing

Multi-angle view of Olympic barbell showing copper bushings, 50mm sleeve, and black zinc shaft.
- 24/7 Gym Equipment

Detail shot of medium-depth barbell knurling for secure grip during CrossFit and Olympic lifting
- 24/7 Gym Equipment

15kg Women's Olympic Barbell – 25mm Shaft, 500lb Capacity | Ladies Hard Chrome Weightlifting Bar

🚚 In Stock – Ready to Ship

(0)

~~$290.00~~ $149.00

In Stock — Ready to Ship 🏋️ Women's Olympic Standard — 15KG / 25mm 500LB / 227KG RATED 🚚 Fast Australia-Wide Delivery

The 15kg Women's Olympic Barbell is the international standard bar for female athletes — used in IWF Olympic weightlifting competition and adopted worldwide for technique training, CrossFit, functional fitness and progressive strength programmes. With a 25mm shaft diameter (slimmer than the 28mm men's standard), it provides a more natural grip for smaller hands without sacrificing performance. Rated to 500lb (227kg) with copper bushings for smooth, controlled sleeve rotation and a hard chrome finish for long-term corrosion resistance. Fully compatible with all 50mm Olympic plates and bumper plates. The essential ladies Olympic bar for home gyms, PT studios and weightlifting clubs across Sydney, Melbourne, Brisbane, Adelaide and Perth.

15KGBar Weight

25mmShaft — Women's Standard

227KG500LB Load Capacity

50mmOlympic Sleeves

Why does shaft diameter matter for women's Olympic lifting?
The 25mm shaft on this bar is 3mm narrower than a standard men's 28mm Olympic bar. That difference is significant — a thinner shaft reduces the grip diameter, allowing smaller hands to wrap fully around the bar and maintain a secure hook grip or double-overhand grip during snatch, clean and high-rep pulling movements. Using a 28mm bar with smaller hands increases wrist strain and reduces pulling efficiency. The 25mm women's standard is not a compromise — it is the IWF competition specification used at the Olympic Games.

Why the 15kg Women's Bar?

3 Reasons This Is the Right Bar

🤲 25mm Grip — Built for Smaller Hands 3mm narrower than a men's bar — allows full hand wrap, stronger hook grip and better wrist position during snatches, cleans and high-rep Olympic pulling movements

⚖️ 15KG — IWF Women's Standard The international standard weight for women's Olympic weightlifting competition — correct starting load for technique development, progressive programmes and competition preparation

🔄 Copper Bushing Rotation Copper bushings deliver smooth, controlled sleeve spin for dynamic Olympic lifts — reduces wrist torque during snatches and cleans for safer, more efficient movement

Key Features

Performance Specs That Matter

📏

25mm Shaft — Women's Olympic StandardIWF competition specification — 3mm narrower than a men's bar for improved grip, hook grip security and wrist alignment during Olympic technique work and high-rep WODs

⚖️

15KG Bar Weight / 500LB CapacityCorrect competition weight for women's Olympic lifting — 227kg (500lb) load capacity supports progressive overload from beginner technique work through to heavy strength training

🔄

Copper Bushing Sleeve RotationCopper bushing system delivers smooth, controlled spin — suited to Olympic lifts and functional training where consistent rotation reduces wrist torque between reps

✨

Hard Chrome FinishFull hard chrome coating on shaft and sleeves — corrosion-resistant and durable for Australian garage gyms, studio environments and daily training use

✋

Medium Knurling — No Centre KnurlSecure grip without excessive abrasion — dual hand position markings for Olympic and powerlifting grip width. No centre knurl for comfortable front rack and back rack positioning

🔩

50mm Olympic SleevesUniversal Olympic sleeve standard — compatible with all bumper plates, cast iron plates and rubber-coated plates. Fits all standard power racks, squat stands and lifting platforms

What Can You Train With This Bar?

Full Exercise Library

Olympic Lifting

Snatch — full & power
Clean & jerk — full & power
Hang clean & hang snatch
Clean pull & snatch pull
Overhead squat

Strength & Powerlifting

Back squat & front squat
Deadlift — conventional & sumo
Bench press
Overhead press & push press
Romanian deadlift (RDL)

CrossFit & High-Rep WODs

Barbell cycling (touch & go)
Thrusters
Push jerk & split jerk
Bar muscle-up transitions
Grace, Isabel & classic WODs

Technique & Accessory Work

Barbell hip thrust
Bent-over barbell row
Barbell good mornings
Snatch-grip deadlift
Tall clean & tall snatch drills

Specifications

Technical Details

Bar Weight	15kg (33lb) — IWF women's Olympic standard
Total Length	2010mm (201cm)
Shaft Diameter	25mm — women's Olympic competition standard
Sleeve Diameter	50mm — universal Olympic plate standard
Maximum Load Capacity	227kg / 500lb
Rotation System	Copper bushings — smooth controlled sleeve spin
Finish	Hard chrome — corrosion-resistant, durable
Knurling	Medium depth — dual hand position markings, no centre knurl
Plate Compatibility	All 50mm Olympic plates — bumper plates, cast iron, rubber-coated
Rack Compatibility	Fits all standard power racks and squat stands
Best For	Women's Olympic lifting, CrossFit WODs, technique training, home gyms, PT studios
Delivery	Australia-wide — Sydney, Melbourne, Brisbane, Adelaide, Perth

Which Bar Do You Need?

15kg Women's Bar vs 20kg Men's Bar

Feature	20kg Men's Olympic Bar	15kg Women's Bar (This)
IWF Standard	Men's competition standard	Women's competition standard
Shaft Diameter	28mm — larger grip circumference	25mm — suits smaller hands, better hook grip
Bar Weight	20kg — heavier starting load	15kg — lower barrier to entry
Load Capacity	226kg+ standard	227kg / 500lb
Olympic Technique Training	Full — heavier starting load	Full — 5kg lighter for better technique focus
High-Rep WOD Performance	Heavier — harder to cycle	Lighter — faster barbell cycling
Wrist Comfort (smaller hands)	28mm can cause wrist strain	25mm — natural grip, reduced strain
Bumper Plate Compatibility	All 50mm Olympic plates	All 50mm Olympic plates

Who Is This Best For?

The Right Bar For

Women's Olympic weightlifters — 15kg / 25mm is the IWF competition standard for women; training with the correct bar from day one builds competition-accurate technique and movement patterns
Female CrossFit athletes — 15kg starting load and 25mm grip allow faster barbell cycling in WODs, better hook grip on snatches and cleans, and reduced forearm fatigue across high-rep sets
Beginner lifters (male & female) — the 15kg bar is 5kg lighter than a standard men's bar, providing a more accessible starting load for squats, deadlifts and presses while learning technique
PT studios & women's-only gyms — essential equipment for female clients; a 15kg women's bar should be in every PT studio alongside the standard 20kg bar
Technique-focused athletes — the 5kg weight reduction versus a 20kg bar allows more focus on positions, timing and bar path during snatch and clean & jerk technique sessions
Home gym owners with smaller hands — male or female lifters with smaller hands benefit significantly from the 25mm grip diameter for hook grip security and wrist comfort

Honest Assessment

Pros & Cons

✓ Pros

25mm shaft — IWF women's Olympic competition standard
15kg starting weight — lower barrier, better technique focus
Copper bushing rotation — smooth, controlled sleeve spin
Hard chrome finish — long-term corrosion resistance
No centre knurl — comfortable front rack and back squat
Fits all 50mm Olympic plates and standard power racks
227kg / 500lb capacity — supports serious progressive training

✗ Cons

Bushings (not bearings) — less spin than needle-bearing bars at higher price points
Not suited for maximum-load powerlifting (consider a 20kg power bar for 1RM squat and deadlift)
Hard chrome requires occasional cleaning to maintain finish in humid environments

Visit Our Sydney Showroom

📍

Inspect In Person — Sydney 10/202 Milperra Road, Milperra NSW 2214 — feel the 25mm grip, compare against the 20kg men's bar and test sleeve rotation side by side 📍 Get Directions

🕘

Showroom Hours Mon–Fri 9am–5pm · Sat 9am–1pm · Closed Sunday Expert team available to advise on the right bar for your training goals, hand size and gym setup

💬

Not Sure Which Bar? Contact us via phone 1300 247 888 or WhatsApp +61 412 029 000 — we help you choose between the 15kg and 20kg bar for your specific training programme

Delivery & Pickup

🚚Fast Australia-Wide DeliverySydney Metro: 1–2 days · Melbourne & Brisbane: 2–3 days · Adelaide & Perth: 3–5 days · All states and territories

📦Securely PackagedBar arrives individually wrapped and protected to prevent sleeve and shaft damage during freight — ready to load and train on arrival

🏪Pickup — Milperra NSW10/202 Milperra Road, Milperra NSW 2214 · Mon–Fri 9am–5pm · Sat 9am–1pm

Frequently Bought Together

Complete Your Setup

⚫ Olympic Bumper Plates → 🏋️ All Barbells → 🏗️ Power Racks & Squat Racks → 🟫 Rubber Gym Flooring →

Frequently Asked Questions

Common Questions

What is a women's Olympic barbell and how is it different from a men's bar?

A women's Olympic barbell weighs 15kg and has a 25mm shaft diameter — versus the men's standard of 20kg and 28mm. Both use 50mm Olympic sleeves and are compatible with the same plates and racks. The 3mm shaft difference is significant — the thinner 25mm grip allows smaller hands to wrap fully around the bar, enabling a more secure hook grip during snatches and cleans. The 5kg weight difference lowers the starting load, making technique development more accessible. The 15kg / 25mm specification is the IWF competition standard used at the Olympic Games for women's weightlifting.

Can men use a 15kg women's Olympic barbell?

Yes. Men with smaller hands, beginners starting out on technique, or lifters focused on high-rep CrossFit WODs regularly use the 15kg women's bar. The 25mm shaft provides a better grip for smaller hand sizes regardless of gender. In CrossFit, the 15kg bar is often the prescribed weight for women's workouts (Rx), so male athletes training at those loads will use this bar too. There are no performance downsides to using a 15kg bar beyond the lower starting weight.

What is the difference between bushing and bearing barbells?

The sleeve rotation system determines how smoothly the plates spin during a lift. Bushing barbells (like this bar) use bronze or copper inserts between the sleeve and the bar — they produce smooth, controlled rotation suited to Olympic technique work, CrossFit and general strength training. Needle bearing barbells use small cylindrical rollers for faster, freer spin — they are preferred by competitive Olympic weightlifters who need maximum sleeve speed during competition snatches and cleans. For most training purposes, a copper bushing bar provides all the rotation needed at a more accessible price point than a needle-bearing competition bar.

Is this bar suitable for CrossFit and WOD training?

Yes — the 15kg women's bar is the standard Rx bar for women's CrossFit workouts. The 25mm grip allows efficient hook grip for cycling snatches and cleans, the no-centre-knurl design is comfortable during front rack thrusters and overhead positions, and the medium knurling provides secure grip without tearing hands during high-rep sets. Classic benchmark WODs including Grace (30 clean & jerks), Isabel (30 snatches) and many AMRAP and EMOM formats are performed with a 15kg bar for women's Rx.

What does 500lb / 227kg load capacity mean for training?

The 227kg (500lb) load capacity is the maximum weight this bar is engineered to safely support across its lifespan. For context, the world record women's total in Olympic weightlifting is approximately 270kg — which requires a competition-grade bar. For training purposes, 227kg is more than sufficient for all home gym, PT studio and recreational CrossFit loading. Very few athletes will ever load a 15kg bar to anywhere near 200kg. The 500lb rating means you will never need to worry about bar capacity as a limiting factor in your training progression.

Will this bar fit my power rack and Olympic plates?

Yes on both counts. At 2010mm total length, this bar fits all standard power racks and squat stands designed for 200cm+ Olympic bars — the same racks that accommodate a 20kg men's bar. The 50mm Olympic sleeves are the universal standard — all bumper plates, cast iron Olympic plates and rubber-coated plates with a 50mm centre hole are fully compatible. Note: Standard 25mm or 30mm plates will not fit — only Olympic 50mm plates are compatible with this bar.

Is a 15kg barbell good for beginners?

Yes — a 15kg Olympic barbell is one of the best starting points for beginners learning the main barbell lifts. The bar itself provides meaningful resistance (15kg is not trivial for presses and overhead work) while being 5kg lighter than the men's standard, giving more room to focus on technique before adding plates. For beginners with smaller hands, the 25mm shaft also makes gripping and bracing much more natural than a 28mm bar. Many experienced coaches specifically recommend the 15kg women's bar for beginners of any gender starting Olympic weightlifting technique.

How do I care for a hard chrome barbell?

Hard chrome is one of the most durable barbell finishes available — significantly more corrosion-resistant than black zinc or bare steel. To maintain it: wipe the bar down with a dry cloth after each session to remove sweat and chalk residue. Every 1–3 months, apply a light coat of 3-in-1 oil or barbell-specific oil to the shaft and sleeves to protect against humidity. Avoid leaving chalk caked in the knurling — a stiff brush removes buildup without damaging the chrome. With basic maintenance, a hard chrome barbell performs reliably for many years in Australian garage gym conditions.

Where can I buy a women's 15kg Olympic barbell in Australia?

You can order the 15kg Women's Olympic Barbell online with fast delivery Australia-wide — Sydney, Melbourne, Brisbane, Adelaide, Perth and all regional areas. If you are in Sydney, you can also inspect the bar in person at our Milperra showroom (10/202 Milperra Road, Milperra NSW 2214) and compare it against other bars in our range. Local pickup is available. Contact us on 1300 247 888 or WhatsApp +61 412 029 000 for stock availability and expert barbell advice.

15kg Women's Olympic Barbell — Delivery Areas Australia:
Sydney (NSW) · Parramatta · Bankstown · Liverpool · Penrith · Blacktown · Campbelltown · Bondi · Chatswood · Manly · Mosman · Turramurra · Castle Hill · Northern Beaches · Inner West · Sutherland Shire · Ryde · Melbourne (VIC) · Brisbane (QLD) · Adelaide (SA) · Perth (WA) · Canberra (ACT) · Gold Coast · Newcastle · Wollongong · Sunshine Coast · Geelong · Hobart (TAS) · Darwin (NT) · Cairns · Central Coast

15KG Elite Olympic Barbell – 1000LB - 24/7 Gym Equipment

15KG Olympic Barbell | Women's Olympic Lifting Bar | Sydney Australia

🚚 In Stock – Ready to Ship

(0)

~~$349.00~~ $195.00

In Stock — Sydney Milperra Warehouse ★ 4.9 / 5 — 83 Verified Reviews 1000LB / 453KG RATED 🔬 190,000 PSI 42CrMo Steel 🚚 Fast Australia-Wide Delivery

The 15KG Women's Olympic Barbell is the elite-grade women's lifting bar for serious athletes — built from 42CrMo chromium-molybdenum alloy steel rated to 190,000 PSI tensile strength, with 8 needle bearings for competition-grade sleeve rotation. At 25mm shaft diameter (the IWF women's Olympic standard), this bar delivers a superior grip for snatches, cleans and high-rep WODs compared to the 28mm men's bar. Rated to 1000LB (453KG) — more than double the capacity of budget women's bars — and finished in black zinc or satin chrome for long-term corrosion resistance. Available in stock at our Sydney Milperra showroom with fast freight to Melbourne, Brisbane, Adelaide and Perth.

190KPSI42CrMo Tensile Strength

8Needle Bearings

25mmWomen's Olympic Shaft

453KG1000LB Load Capacity

What makes this bar different from a standard bushing women's bar?
Most entry-level 15kg women's bars use bronze bushings and lower-grade steel rated at 160,000–170,000 PSI. This bar uses 42CrMo alloy steel at 190,000 PSI — stiffer, stronger and less prone to bending under repeated heavy loading. The 8 needle bearings replace bushings for far faster, smoother sleeve rotation — critical for snatches and cleans where the bar must spin freely during the catch. This is a performance-grade bar built to the same specification used in commercial Olympic weightlifting facilities, not a recreational-grade alternative.

What's Inside This Bar

Why Every Component Matters

42CrMo Alloy Steel

Chromium-molybdenum alloy steel — 190,000 PSI tensile strength, well above the 165,000 PSI minimum for performance training. Stiffer, stronger, more resistant to bending under sustained heavy loading

8 Needle Bearings

Needle bearings allow the sleeve to spin freely and independently from the shaft — essential for Olympic lifts where the bar must rotate during the catch. Reduces wrist torque and improves bar path timing

25mm Shaft — IWF Standard

The recognised international standard for women's Olympic lifting. 3mm narrower than the men's 28mm bar — improves grip comfort, hook grip security and wrist alignment for all Olympic pulling movements

Dual Knurl Marks, No Centre Knurl

Olympic and powerlifting hand position markings for correct grip width. No centre knurl means comfortable bar placement during back squats, front squats and high-rep WODs without neck or trap abrasion

50mm Olympic Sleeves

Universal Olympic sleeve standard — fully compatible with all bumper plates, cast iron Olympic plates and rubber-coated plates from any brand. No adapters required. Fits all standard power racks

Black Zinc or Satin Chrome Finish

Both finishes protect against sweat and corrosion — important for Australian coastal and high-humidity garage gym environments where bare steel bars rust rapidly without maintenance

Key Features

Performance Specs That Separate This Bar

🔬

190,000 PSI 42CrMo Alloy SteelHigh-tensile chromium-molybdenum steel — 25,000 PSI above the minimum for serious training. Stiffer under load, less prone to set (permanent bending) over years of heavy use

🔄

8 Needle Bearings — Competition SpinNeedle bearings deliver far faster, smoother sleeve rotation than bronze bushings — the specification used in Olympic weightlifting competition bars for snatch and clean & jerk

📏

25mm Shaft — Women's Olympic StandardIWF competition specification — allows full hand wrap, strong hook grip and natural wrist alignment. The correct shaft for all women's Olympic technique work and high-rep CrossFit WODs

⚖️

1000LB / 453KG Load CapacityMore than double the capacity of budget women's bars. 42CrMo construction supports serious progressive loading — this bar will never be the limiting factor in training

✋

Medium Knurl — No Centre KnurlDual hand position markings for Olympic and strength grip width. No centre knurl for comfortable front rack position, back squat and high-rep barbell cycling without trap abrasion

✨

Black Zinc or Satin Chrome FinishTwo finish options for different training environments — both provide corrosion resistance and low-maintenance durability for daily training in Australian gym conditions

Training Applications

What You Can Train With This Bar

Olympic Lifting

Snatch — full & power (needle bearings critical)
Clean & jerk — full & power
Hang clean & hang snatch
Clean pull & snatch pull
Overhead squat

Strength & Powerlifting

Back squat (no centre knurl — comfortable)
Front squat
Deadlift — conventional & sumo
Bench press
Overhead press & push press

CrossFit & High-Rep WODs

Barbell cycling — touch & go cleans & snatches
Thrusters (Grace, FGB)
Push jerk & split jerk
Isabel (30 snatches for time)
Grace (30 clean & jerks for time)

Accessory & Technique Drills

Romanian deadlift (RDL)
Bent-over barbell row
Barbell hip thrust
Tall clean & tall snatch drills
Barbell good mornings

Specifications

Technical Details

Bar Weight	15KG — IWF women's Olympic standard
Total Length	2010mm (201cm)
Shaft Diameter	25mm — women's Olympic competition standard
Sleeve Diameter	50mm — universal Olympic plate standard
Steel Type	42CrMo chromium-molybdenum alloy steel
Tensile Strength	190,000 PSI
Maximum Load Capacity	1000LB / 453KG
Rotation System	8 needle bearings — competition-grade sleeve spin
Knurling	Medium depth — dual hand position markings (Olympic + powerlifting), no centre knurl
Finish Options	Black zinc or satin chrome
Plate Compatibility	All 50mm Olympic plates — bumper plates, cast iron, rubber-coated
Rack Compatibility	Fits all standard power racks, squat stands and Olympic rigs
Best For	Olympic weightlifting, CrossFit, functional fitness, PT studios, commercial gyms
Availability	In stock — same-day Sydney pickup or fast freight Australia-wide

Buying Guide

15KG Women's Bar vs 20KG Men's Bar

Specification	20KG Men's Bar	15KG Women's Bar (This)
IWF Standard	Men's competition standard	Women's competition standard
Shaft Diameter	28mm — larger grip circumference	25mm — better hook grip for smaller hands
Bar Weight	20KG — heavier starting load	15KG — 5KG lighter for technique focus
Load Capacity (this bar)	Varies by model	453KG / 1000LB
Needle Bearings (this bar)	Varies by model	8 needle bearings — competition spin
Steel (this bar)	Varies by model	42CrMo — 190,000 PSI
WOD Barbell Cycling	Heavier — harder to cycle	Lighter — faster, more efficient cycling
Plate Compatibility	All 50mm Olympic plates	All 50mm Olympic plates

Who Is This Best For?

The Right Bar For

Olympic weightlifters (women's) — 25mm / 15KG is the IWF competition standard; 8 needle bearings deliver the sleeve rotation speed required for competition-accurate snatch and clean & jerk technique
Female CrossFit athletes — 15KG Rx bar for women's WODs; needle bearings handle fast touch-and-go cycling; no centre knurl means comfortable thrusters and front rack positions across long metcons
PT studios & commercial weightlifting facilities — 42CrMo construction and 453KG capacity rated for daily high-frequency commercial use; the most commonly specified women's bar in serious Australian lifting facilities
Beginner to advanced lifters — correct starting bar regardless of experience level; the IWF women's standard is used from beginner technique sessions through to elite competition
Home gym owners (serious) — needle bearing bars deliver a noticeably different feel compared to bushing bars; if you're investing in a quality home gym setup, this is the bar worth buying once
Lifters with smaller hands (any gender) — the 25mm shaft provides superior hook grip security and grip comfort for athletes whose hand size is better suited to a narrower diameter

Honest Assessment

Pros & Cons

✓ Pros

42CrMo steel — 190,000 PSI, significantly above budget bar specifications
8 needle bearings — competition-grade sleeve spin for snatches and cleans
453KG / 1000LB capacity — will not be outgrown regardless of training level
25mm shaft — IWF women's standard for hook grip and wrist alignment
No centre knurl — comfortable front rack, back squat and high-rep WODs
Two finish options — black zinc or satin chrome to suit your gym aesthetic
In stock Sydney — same-day pickup or fast freight Australia-wide
4.9/5 from 83 verified reviews

✗ Cons

Higher price point than bushing women's bars — reflects 42CrMo steel and needle bearing construction
No centre knurl — if you squat without a shirt and need extra grip on the bar, a centre-knurl bar may be preferable
Needle bearings require occasional maintenance (light oiling) to maintain peak spin performance

Verified Customer Reviews

What Australian Lifters Say

★★★★★

"The sleeve spin on this bar is noticeably better than the last bar I bought at a similar price point. My snatches feel smoother and I have much better bar control in the catch."

Priya K.

Weightlifting Club — Sydney NSW

★★★★★

"Visited the Milperra showroom and got to test it before buying. The knurling is just right — aggressive enough to hold, not so rough it tears your hands during long sessions."

Lauren T.

Home Gym — Sydney NSW

★★★★☆

"Bought two for our PT studio in Melbourne. Great build quality and fast freight. The 25mm shaft is a genuine improvement for our female clients over the 28mm bars we had before."

James W.

PT Studio — Melbourne VIC

Visit Our Sydney Showroom

📍

Inspect In Person — Sydney 10/202 Milperra Road, Milperra NSW 2214 — hold the 25mm shaft, test the needle bearing sleeve spin and compare against our full barbell range before buying 📍 Get Directions

🕘

Showroom Hours Mon–Fri 9am–5pm · Sat 9am–1pm · Closed Sunday Same-day pickup available for Sydney buyers — order online or walk in

💬

Expert Barbell Advice Phone: 1300 247 888 · WhatsApp: +61 412 029 000 — we help you choose between bushing and bearing bars, finish options and compare with the 20KG men's bar

Delivery & Pickup

📦SydneySame-day pickup or 1–2 business days

📦Melbourne1–2 business days

📦Brisbane2–3 business days

📦Adelaide2–3 business days

📦Perth3–5 business days

📦Regional AUEnquire at checkout

Frequently Bought Together

Complete Your Setup

⚫ Olympic Bumper Plates → 🏋️ All Barbells → 🏗️ Power Racks & Squat Stands → 🟫 Rubber Gym Flooring →

Common Questions

Frequently Asked Questions

What are 3 important things to check before buying an Olympic bar in Australia?

The three most important things to check are coating, tensile strength, and shaft diameter. Each factor affects performance and longevity in Australian conditions.

1) Coating and rust protection: Climate matters across Australia. Coastal areas like Sydney can accelerate rust on unprotected steel.

Bare steel: Great natural feel, but requires more maintenance
Black zinc or black oxide: Moderate rust protection for regular gym use
Satin chrome or Cerakote: Best for humid or coastal environments

2) Tensile strength: Avoid bars under 165,000 PSI for serious training. This bar is rated at 190,000 PSI — well above that threshold.

3) Shaft diameter: Choose based on training style and comfort.

25mm: Women's Olympic lifting standard — this bar
28mm: Men's Olympic lifting standard
28.5mm: General use and functional training
29mm: Powerlifting, stiffer feel

Is a 15kg or 20kg barbell better for women?

For most women, the 15KG bar is the better starting point. It matches the official women's Olympic lifting standard and uses a slimmer 25mm shaft which is more comfortable for smaller hands.

However, some experienced lifters prefer a 20KG bar for heavier strength work. The right choice depends on your training goals and grip comfort. If you focus on Olympic lifting or functional fitness, the 15KG bar is generally recommended. This bar is also the correct choice for women competing in CrossFit at Rx standards.

What does 190,000 PSI tensile strength mean?

Tensile strength measures how much force a steel bar can handle before it deforms or breaks. 190,000 PSI means the steel resists 190,000 pounds of force per square inch.

In practical terms, higher PSI means stiffer, stronger steel that is less likely to bend or take a permanent set under heavy loads. Most quality Olympic bars start at around 165,000 PSI, so this bar sits firmly in the performance tier — the same steel grade used in commercial Olympic lifting bars across Australia.

Where can I find reputable Australian suppliers of Olympic barbells?

Choose based on the movements you perform most often. For Olympic lifting, prioritise smooth sleeve rotation and needle bearings — these directly improve bar control during dynamic lifts.

Select a shaft diameter that suits your grip — 25mm for women's Olympic lifting, 28mm for men's. For general strength work, focus on durable steel and a corrosion-resistant finish. Reputable Australian suppliers will have local warehouses or showrooms, clear product specifications, published load ratings and warranty support. We stock this bar locally in Sydney at our Milperra showroom for inspection before purchase.

What is the standard weight of an Olympic barbell in kilograms?

The standard men's Olympic barbell weighs 20KG. The standard women's Olympic barbell weighs 15KG. Both use 50mm Olympic sleeves and are fully compatible with Olympic plates and standard power racks. This is the IWF competition specification used at the Olympic Games.

Where can I buy a 15KG women's Olympic barbell near me?

You can order online with fast Australia-wide delivery to Sydney, Melbourne, Brisbane, Adelaide, Perth and all regional areas. If you are in Sydney, visit our Milperra showroom (10/202 Milperra Road, Milperra NSW 2214) to inspect the bar, test the needle bearing sleeve spin and compare against other bars in person. Same-day pickup is available for Sydney buyers. Contact us on 1300 247 888 or WhatsApp +61 412 029 000 for stock and advice.

What is the weight capacity of this bar?

This bar is rated to 1000LB (453KG) — reflecting the quality of the 42CrMo alloy steel construction. This load rating is well suited for technique work, functional training, CrossFit and progressive strength sessions. For context, 453KG is more than most recreational and intermediate lifters will ever load on a 15KG bar — this capacity ensures the bar will not be the limiting factor in your training regardless of how strong you become.

What features should I look for in a durable Olympic lifting bar?

Prioritise high tensile steel, reliable sleeve rotation, consistent knurling, and corrosion resistance. Specifically, tensile strength above 165,000 PSI and needle bearings indicate a performance-grade bar suitable for Olympic lifting.

These features improve both performance and long-term durability. This bar covers all four — 190,000 PSI 42CrMo steel, 8 needle bearings, medium precision knurling with dual position markings, and black zinc or satin chrome corrosion protection.

What are the standard specifications for a women's Olympic barbell?

Standard specifications for a women's Olympic barbell include a 15KG bar weight, 25mm shaft diameter, 50mm sleeve diameter, and a total length of approximately 2010mm. Controlled sleeve rotation via needle bearings is standard for competition-grade Olympic lifting bars. This bar meets all IWF specifications for women's competition and training.

15KG Women's Olympic Barbell — Delivery Areas Australia:
Sydney (NSW) · Parramatta · Bankstown · Liverpool · Penrith · Blacktown · Campbelltown · Bondi · Chatswood · Manly · Mosman · Turramurra · Castle Hill · Northern Beaches · Inner West · Sutherland Shire · Ryde · Melbourne (VIC) · Brisbane (QLD) · Adelaide (SA) · Perth (WA) · Canberra (ACT) · Gold Coast · Newcastle · Wollongong · Sunshine Coast · Geelong · Hobart (TAS) · Darwin (NT) · Cairns · Central Coast

Close-up of the 25mm black zinc shaft featuring dual IWF and IPF knurl markings and a matte finish for superior grip.

Hard chrome Olympic barbell sleeve with high-precision needle bearings and a 24/7 Gym Equipment branded end cap.

Machined hard chrome sleeve of an Olympic barbell showing fine grooves to keep weight plates secure during lifting.

15KG Women's Olympic Barbell — Black Zinc | 25mm Shaft | 680KG Rated

🚚 In Stock – Ready to Ship

(4)

~~$510.00~~ $335.00

IWF Women's Competition Standard · 25mm Shaft

15KG Women's Olympic Barbell — Black Zinc | 680KG Rated | Australia's Best Value

Competition-spec 25mm shaft. 210,000 PSI 42CrMo chromoly steel. 8 needle bearings. Black Zinc finish that outlasts Black Oxide in any Australian climate. Delivered to your door for $335 — $115 less than comparable bars.

210kPSI Tensile

680KGLoad Rated

8+2Needle Bearings

25mmShaft Diameter

201cmBar Length

Who Is This Barbell For?

🏋️♀️ Female Weightlifters This is the IWF competition standard — 15KG, 25mm shaft. It is therefore the bar used at national and international level for women's Olympic weightlifting.

⚡ CrossFit Athletes High-rep WOD cycling demands fast sleeve spin and a secure hook grip. Consequently, the 8 needle bearing system and 25mm diameter deliver both.

🎯 Technique & Skill Training The lighter 15KG load is the standard for beginners and youth lifters. It therefore suits movement pattern development before progressing to a 20KG bar.

✋ Smaller Hands / Hook Grip The 25mm shaft closes the hook grip naturally for smaller hands — regardless of gender. So if 28–29mm bars feel too thick, this is your bar.

🏠 Garage Gym Builders Black Zinc handles Australian humidity and coastal salt air. Specifically, it outperforms Black Oxide and bare steel alternatives at this price point.

🏢 PT Studios & CrossFit Boxes This bar is commercial-grade at home-gym pricing. Furthermore, bulk pricing is available on 5+ bar orders — contact us for a quote.

Why the Black Elite Beats Every Bar at This Price

📐

25mm Shaft — IWF Women's Competition Standard

The IWF mandates 25mm for women's competition. At this diameter, the hook grip closes naturally and snatch turnover is faster.

Furthermore, wrist torque on the clean & jerk drops significantly. Standard men's bars at 28–29mm consequently leave smaller hands in a compromised grip position — one that costs reps and risks injury under heavy loads.

IWF Standard

💪

210,000 PSI — 42CrMo Chromoly Steel

Tensile strength is the load at which steel permanently deforms. Standard commercial bars run 150,000–190,000 PSI.

By comparison, the Black Elite's 210,000 PSI places it in the same specification tier as bars costing $150–$200 more. As a result, it provides elastic whip for Olympic lifts and returns straight under every training load.

Elite Grade Steel

🔄

8 Needle Bearings + 2 Bronze Bushings

Bushing-only bars transfer torque directly to your wrists during the snatch and clean & jerk. The Black Elite, however, uses 8 needle bearings for primary sleeve spin plus 2 bronze bushings for structural stability.

This is the same hybrid system found in competition bars. Consequently, sleeves rotate freely on the pull — protecting your joints over years of training.

Competition-Level Spin

Finish, Sleeves, and Knurling: Built for Australian Conditions

🛡️

Black Zinc Shaft — Beats Black Oxide

Black oxide is a surface-only treatment that consequently degrades in humidity, sweat, and chalk within months. Black Zinc, however, is electrolytically bonded — penetrating the steel surface for lasting corrosion resistance.

For Australian garage gyms and coastal homes in Sydney, the Gold Coast, or Perth, Black Zinc is therefore the correct finish choice.

Coastal Climate Ready

✨

Hard Chrome Sleeves — Rust-Proof

The 50mm Olympic sleeves are finished in hard chrome — therefore the most durable sleeve coating available short of stainless steel. Hard chrome will not pit, flake, or corrode under daily plate loading.

Furthermore, the smooth finish lets bumper plates and iron plates slide without resistance, even during heavy WOD-style sessions.

50mm Olympic Standard

🎯

Dual IWF/IPF Knurl Marks — No Centre Knurl

Dual knurl rings let you find your grip position instantly for both Olympic lifting and powerlifting movements. Moreover, the medium-aggressive texture gives enough bite for a hook grip without tearing hands during high-rep cycling.

Importantly, there is no centre knurl — so front squats, push presses, and thrusters won't scar your back. This is a detail that cheaper bars miss.

IWF + IPF Marked

Full Technical Specifications

Specification	Black Elite Detail
Bar Weight	15KG (±1%)
Bar Length	201cm / 6.6ft — IWF Women's Standard
Shaft Diameter	25mm — Female / Youth / Technique Standard
Sleeve Diameter	50mm — Universal Olympic Plate Standard
Max Load Rating	680KG / 1,500lb — Highest in class
Tensile Strength	210,000 PSI — Elite Grade
Steel Grade	42CrMo Chromoly Alloy
Rotation System	8 Needle Bearings + 2 Bronze Bushings
Shaft Finish	Black Zinc (superior to Black Oxide)
Sleeve Finish	Hard Chrome
Knurling Pattern	Medium-Aggressive, Dual IWF/IPF Markings
Centre Knurl	None — back-rack friendly
Best For	Olympic Weightlifting, CrossFit, Technique Training, Home & Commercial Gym
Warranty	12 Months Structural Warranty

How It Compares

⭐ Black Elite — Ours

Price$335

Tensile210,000 PSI

Load680KG

FinishBlack Zinc

Bearings8 Needle + 2 Bush

Length201cm IWF

Shaft25mm

Warranty✓12 Months

Typical 15KG Bars

Price$180–$450+

Tensile150k–215k PSI

Load300–540KG

FinishBlack Oxide / Chrome

BearingsBushing or Mixed

LengthVaries

Shaft25mm

Warranty✗None / 30 Days

This Bar Is the Right Choice If…

You are a female weightlifter — this bar is therefore the IWF-standard choice for competition and training
You do CrossFit and consequently need fast sleeve spin for cycling movements at high rep ranges
You are a youth or junior lifter — 15KG is the IWF standard for under-17 competition and is thus the correct starting bar
You have smaller hands and the 28–29mm standard shaft is therefore too thick for a full hook grip
You are learning Olympic lifting and need a lighter bar, since technique development requires a manageable load
You train in a garage gym in a humid or coastal environment and accordingly need a corrosion-resistant Black Zinc finish
You run a PT studio or CrossFit box and need commercial-spec bars — furthermore, bulk pricing is available on 5+ units
You want a bar for front squats and thrusters without centre knurl scarring your back, since this bar has none

🛡️

12-Month Structural Warranty — Included The Black Elite carries a 12-month structural warranty covering manufacturing defects in the shaft, sleeves, and bearing assembly. It covers material failure under normal training loads. However, it does not cover dropping without bumper plates, excessive moisture without maintenance, or loading beyond the 680KG rated capacity. To make a claim, contact [email protected] with your order details.

Delivery & Click & Collect

🏭 Click & Collect — Milperra NSW

10/202 Milperra Road, Milperra NSW 2214. Mon–Fri 9am–5pm, Sat 9am–1pm. It is therefore accessible from Bankstown, Liverpool, Parramatta, and the M5 corridor.

🚚 Australia-Wide Fast Shipping

We dispatch daily to Sydney Metro, Melbourne, Brisbane, Perth, Adelaide, and beyond. Typically, metro orders arrive in 2–5 days and regional orders in 3–7 days.

📦 Bulk & Commercial Orders

Supplying a CrossFit box, PT studio, or school gym? Furthermore, bulk pricing is available on 5+ bars. Call 1300 247 888 or email us for a commercial quote.

Frequently Asked Questions

Bar Suitability and Usage

Is this a women's barbell — can men use it?

The 15KG, 25mm configuration is the IWF competition standard for female athletes. However, this is not a women's-only bar.

It is equally popular with youth athletes, male lifters with smaller hands, and anyone using it for technique work or CrossFit cycling. If you are a male lifter with large hands doing heavy powerlifting, a 20KG bar with a 28–29mm shaft is therefore likely better suited.

What is the difference between this and a 20KG barbell?

There are two main differences: weight and shaft diameter. This bar is 5KG lighter, which matters for technique training, CrossFit scaling, and youth lifters.

Furthermore, the shaft is 25mm versus 28–29mm on standard men's bars. The narrower diameter allows a more complete hook grip for smaller hands and makes high-rep cycling faster. Importantly, both bars use the same 50mm sleeve diameter — so all Olympic plates are compatible with both.

Can I drop this barbell from overhead?

Yes — the Black Elite is designed for overhead drops when used with bumper plates on rubber gym flooring (15mm+ tiles) or a dedicated lifting platform.

However, do not drop the bar with iron or steel plates, as only bumper plates absorb and distribute impact energy safely. Additionally, do not drop on bare concrete — this risks permanent sleeve and bearing damage regardless of bar spec or load.

Does Black Zinc require maintenance?

Black Zinc is significantly lower maintenance than bare steel or Black Oxide. Nevertheless, a basic routine extends its life considerably.

After each session, brush chalk from the knurling and wipe the shaft dry. Every 4–6 weeks, apply a light coat of 3-in-1 oil or barbell-specific lubricant. The hard chrome sleeves, meanwhile, require no maintenance beyond keeping them free from chalk buildup.

Compatibility, Sizing, and Warranty

What plates are compatible with this barbell?

The sleeves are 50mm in diameter — the universal Olympic plate standard. As a result, all Olympic bumper plates, rubber-coated Olympic plates, and iron Olympic plates with a 50mm centre hole are fully compatible.

Standard plates with a 25–30mm centre hole are not compatible and must not be used on this bar. If you are unsure, measure the centre hole — 50mm (approximately 2 inches) confirms Olympic compatibility.

What is the bar length and will it fit my rack?

The Black Elite is 201cm (6.6ft) total — the IWF women's competition standard. It fits all standard power rack and squat rack setups without modification.

The usable shaft length between the inner sleeve collars is 131cm, which accommodates standard Olympic plate loading on both sides. If you have a compact rack, measure your collar-to-collar internal width before ordering. However, the vast majority of racks on the market are designed for both 201cm and 220cm bars.

What warranty does this barbell come with?

The Black Elite carries a 12-month structural warranty covering manufacturing defects in the shaft, sleeves, and bearing assembly under normal training conditions.

The warranty does not cover damage caused by: dropping without bumper plates, excessive moisture without maintenance, loading beyond the 680KG rated capacity, or misuse. To make a warranty claim, email us with your order number and photos of the defect.

Is the Black Elite good for powerlifting — bench, squat, and deadlift?

Yes, with context. The 680KG load rating handles all powerlifting loads comfortably. Furthermore, the IPF knurl markings are present for correct grip positioning on all powerlifting movements.

However, the 15KG bar weight and significant whip make it better suited to Olympic-style lifts and CrossFit than heavy powerlifting. For a dedicated powerlifting setup, consider pairing this bar with a separate 20KG power bar. For a home gym covering all movement patterns, the Black Elite handles everything competently.

Ready to Lift? The Black Elite Ships Tomorrow.

In-stock orders dispatch next business day from our Milperra warehouse. Questions before you order? Our team is ready to help.

Add to Cart — $335

20kg Elite Olympic Barbell full view with hard chrome finish and 2000lb capacity for home gyms in Australia - 247 Gym Equipment

End cap of 210k PSI tensile strength barbell showing dual snap ring construction and chrome plating. - 247 Gym Equipment

20KG Olympic Power Barbell | 2000LB Capacity

🚚 In Stock – Ready to Ship

(2)

~~$520.00~~ $360.00

20KG Elite Olympic Power Barbell | 2000LB (907KG) Capacity | Hard Chrome Finish | Sydney, Australia

A premium heavy-duty 20kg Olympic power barbell built for powerlifting, Olympic lifting, strength training, and high-use commercial gyms across Australia. With 210,000 PSI steel, a 2000lb (907kg) load rating, and a smooth 8 needle bearing rotation system, this bar is designed for serious training environments where performance and durability matter.

Australian owned & operated 210,000 PSI steel Passive centre knurl Sydney warehouse pickup

Sydney Showroom

Inspect Before You Buy

10/202 Milperra Road, Milperra NSW 2214

Open for public inspection, local pickup, and trade enquiries.

Get Directions

Engineered for heavy training in Australia

If you are searching for a heavy-duty 20kg Olympic barbell that performs like a true power bar, this Elite model is built for heavy squats, bench press, deadlifts, and confident Olympic lifting. Manufactured using 210,000 PSI tensile strength steel and rated to 2000lb (907kg), it is designed to withstand repeated heavy loading in high-use environments such as commercial gyms, schools, defence facilities, PT studios, and serious home gyms.

The hard chrome finish offers excellent corrosion resistance and low-maintenance performance in Australian conditions, including humid and coastal areas. The 8 needle bearing sleeve system supports smooth, consistent rotation for Olympic lifts while maintaining stability under heavy powerlifting-style loading. With dual knurl marks and a passive centre knurl, you get secure contact for back squats while still keeping the bar comfortable for mixed training.

Elite 2000lb vs standard 1500lb bar

Higher steel strength, better sleeve components, and a higher load rating can make a real difference in busy gyms where barbells are used daily.

Feature	Standard 1500lb bar	Elite 2000lb bar
Tensile strength	150k–190k PSI	210,000 PSI
Rotation system	Bushings or fewer bearings	8 needle bearings
Centre knurl	Often missing	Included (passive)
Finish	Zinc or decorative chrome	Industrial hard chrome
Max rated load	~680kg	907kg (2000lb)

Full product specifications

Weight / length	20kg / 2200mm
Shaft diameter	28.5mm
Steel tensile strength	210,000 PSI
Maximum load	2000lb / 907kg
Rotation system	8 needle bearings
Knurling	Dual marks + passive centre knurl
Finish	Hard chrome

Tips for Choosing the Right Barbell

Olympic vs standard barbells: For most home gyms and commercial gyms in Australia, a 20kg 50mm Olympic barbell is the best long-term choice. Olympic barbells fit 50mm Olympic weight plates and bumper plates, sit correctly on standard power racks, and offer stronger sleeves and better stability under load than standard 25mm or 30mm bars.
Training focus and bar feel: If your priority is heavy squats, bench press, and deadlifts, look for a power barbell feel with strong steel and secure knurling. If you perform Olympic lifts, prioritise consistent sleeve rotation. This Elite bar combines a high load rating with an 8 needle bearing system to support both strength work and Olympic movements.
Budget and build quality: In Australia, reliable 20kg Olympic barbells often start around AUD $100–$250. Higher-end barbells with higher tensile strength steel, premium bearings, and finishes like hard chrome or Cerakote can exceed $500+. Paying more typically delivers better durability, smoother spin, and longer service life in busy gyms.

Olympic Barbell Questions and Answers

Where can I find reputable Australian suppliers of Olympic barbells?

Reputable Australian suppliers of Olympic barbells are specialist fitness equipment retailers that operate local warehouses or showrooms and provide clear product specifications, warranty support, and Australia-wide delivery. Buying from an Australian supplier ensures compatibility with local gym standards and faster after-sales service.

How do I choose the right Olympic barbell for weightlifting?

To choose the right Olympic barbell, consider your training style. Olympic weightlifting and functional training benefit from smoother sleeve rotation, needle bearings, and a 28mm–28.5mm shaft. Powerlifting-focused training benefits from higher tensile strength steel, a stiffer shaft, and secure knurling for heavy squats, bench press, and deadlifts.

What is the standard weight of an Olympic barbell in kilograms?

The standard men’s Olympic barbell weighs 20kg. The standard women’s Olympic barbell weighs 15kg. Both use 50mm Olympic sleeves to fit Olympic weight plates and bumper plates and are compatible with standard power racks.

Where can I buy Olympic barbells near me?

Olympic barbells can be purchased from local gym equipment stores, fitness showrooms, and warehouse suppliers that offer local pickup. Many Australian retailers also provide fast metro and interstate delivery, allowing you to buy high-quality Olympic barbells even if a showroom is not nearby.

Are there lightweight Olympic barbells for beginners?

Yes. Lightweight Olympic barbells are available for beginners, technique training, and junior athletes. Common options include 15kg women’s Olympic barbells and lighter 10kg training bars, all designed with 50mm Olympic sleeves for compatibility with standard plates.

What is an Olympic barbell for women?

An Olympic women’s barbell typically weighs 15kg, features a 25mm shaft for smaller hands, and uses 50mm Olympic sleeves. It is commonly used for Olympic lifting, CrossFit, and functional fitness training.

What is the weight capacity of an Olympic barbell?

Olympic barbell weight capacity varies by model. Entry-level bars may support 300–500kg, while commercial-grade Olympic barbells are commonly rated between 680kg (1500lb) and 907kg (2000lb), offering greater durability and long-term performance.

What features should I look for in a durable Olympic barbell?

A durable Olympic barbell should include high tensile strength steel, a reliable sleeve rotation system, secure knurling, corrosion-resistant finishes such as hard chrome or Cerakote, and a load rating suitable for commercial or home gym use.

Elevate your strength standards

Built for serious training and commercial use across Australia.

FAST DISPATCH AUSTRALIA-WIDE

20KG Elite Olympic Barbell, black zinc finish, 7ft length, 1000lb Capacity - 24/7 Gym Equipment

20KG Elite Olympic Barbell, black zinc finish, 7ft length, 1000LB / 453KG rating badge beside 20KG barbell - 24/7 Gym Equipment

20KG Elite Olympic Barbell (1000LB Capacity)

🚚 In Stock – Ready to Ship

(0)

~~$447.00~~ $199.90

Elite 20KG Olympic Barbell – 1000LB Capacity

Elite Performance Barbell for Powerlifting & Olympic Lifting

Elevate your lifting experience with our 20KG Elite Olympic Barbell, designed for both Olympic lifting and powerlifting. Whether you're training at home or outfitting a commercial gym, this barbell offers smooth spin, balanced knurling, and superior durability.

🔥 Key Features

✔ Full-Length 7ft Bar (2.2m) – Compatible with all Olympic racks and plates
✔ 1,000LB Load Capacity – Built for squats, bench, deadlifts, and Olympic lifts
✔ Enhanced Grip – Precision knurling with centre knurl for back support
✔ Elite Spin – 8-needle bearing sleeves for fast, consistent rotation
✔ High-Tensile Steel – 190,000 PSI strength rating with black zinc finish

📏 Specifications

Total Length: 2,200mm
Loadable Sleeve: 445mm per side
Inner Sleeve Space: 1,310mm
Bar Weight: 20KG
Shaft Diameter: 25mm
Sleeve Diameter: 50mm
Finish: Black zinc coating
Bearings: 8-needle bearings per sleeve
Load Capacity: 1,000LB (453KG)

🏋️ Why Choose Our Elite Olympic Barbell?

✔ Engineered for both Olympic lifting and powerlifting
✔ Trusted by athletes and fitness professionals in Australia
✔ Suitable for home gyms, studios & strength facilities
✔ Fast delivery Sydney, Melbourne, Brisbane & Adelaide
✔ Best price without compromising quality

Looking to buy an Olympic barbell in Australia? This Elite 20KG Olympic Barbell is built for heavy use, premium spin, and total reliability.

💥 Order the best Olympic barbell online today with fast Aussie shipping!

FAQs

Q: Is this barbell suitable for home gyms?
A: Yes, it’s perfect for both home gym users and commercial gym facilities.

Q: What type of exercises can I perform with this barbell?
A: Squats, bench press, deadlifts, Olympic lifts, and CrossFit workouts.

Q: Does it fit standard weight plates?
A: Yes, the 50mm Olympic sleeves are compatible with all Olympic plates.

Q: How strong is the barbell?
A: Built with 190,000 PSI steel and rated for 1,000LB capacity.

Q: How fast is delivery in Australia?
A: 1-day Sydney Metro delivery, fast nationwide shipping.

Olympic barbell chrome sleeve with black zinc shaft – 20KG Elite Olympic Barbell Australia, High performance barbell for CrossFit and Olympic lifting in Australia

20KG Olympic barbell sleeve with precision needle bearings – Commercial grade weightlifting barbell Australia

Elite 20KG Olympic Barbell with dual knurl marks – Designed for heavy lifts up to 1500lbs (680kg)

20KG Elite Olympic Barbell | 680kg Capacity | Strength Training

🚚 In Stock – Ready to Ship

(0)

~~$415.00~~ $225.00

A commercial-grade 20kg Olympic barbell built from 42CrMo alloy steel at 190,000 PSI tensile strength. Rated to 1,500lb / 680kg, with an 8 needle bearing hybrid rotation system, 28mm shaft, dual knurl marks, and a hard-wearing black zinc finish. The reliable long-term choice for CrossFit gyms, strength facilities, and serious home gyms across Australia.

🇦🇺

Australian Stock

Ships nationwide

🏋️

Commercial Grade

1,500lb rated

🔩

Inspect In-Store

Milperra NSW

✅

Warranty Supported

Local after-sales

Technical Specifications

Bar Weight 20 KG Men's Olympic standard	Load Rating 1,500 LB 680kg / commercial grade	Tensile Strength 190K PSI 42CrMo alloy steel
Shaft Diameter 28 MM Olympic lifting standard	Bearings 8× NB Hybrid needle bearing system	Finish Black Zinc Corrosion-resistant

Key Features

⚙️ 8 Needle Bearing Hybrid Rotation
Smooth, consistent sleeve spin under heavy loads. Reduces wrist and elbow stress during cleans, snatches, and jerks.

🔩 42CrMo Alloy Steel — 190,000 PSI Tensile Strength
High-tensile chromoly steel maintains straightness under repeated heavy loading. Built for long-term commercial use.

📏 28mm Shaft — Dual Knurl Marks — No Centre Knurl
Meets international Olympic lifting standards. Dual marks guide hand placement for Olympic and powerlifting movements. No centre knurl prevents abrasion in clean and front rack positions.

🛡️ Black Zinc Protective Finish
Corrosion-resistant coating suited to gym environments including areas with chalk use and moderate humidity.

🏋️ 1,500lb / 680kg Rated Capacity
Exceeds the loading requirements of almost all users. High rating reflects structural durability and resistance to permanent bend under commercial-frequency use.

🔗 Full 50mm Olympic Sleeve Compatibility
Fits all Olympic weight plates and bumper plates. Compatible with all standard Australian power racks and squat stands.

📍 Sydney Showroom

Inspect Before You Buy — Milperra NSW

Our Sydney warehouse showroom is open to the public. Feel the knurling, test sleeve rotation, and compare barbells side by side before committing.

10/202 Milperra Road, Milperra NSW 2214

✓ Test sleeve rotation and bar balance in person
✓ Compare knurl feel against alternative models
✓ Confirm rack and plate compatibility before purchasing
✓ Access trade pricing and gym fit-out packages
✓ Local pickup available — no delivery wait

Serving customers from Bankstown, Liverpool, Parramatta, and Greater Western Sydney

🗺️ Get Directions

Buyer's Guide — Choosing the Right Barbell

Olympic vs Standard Barbells
Olympic barbells use a 50mm sleeve, designed for Olympic plates and bumper plates. Standard bars use a narrower sleeve and are not compatible. For any serious training or gym setup in Australia, a 20kg Olympic barbell is the industry standard. Standard bars are unsuitable for heavy loading and have limited long-term compatibility.

Training Style and Bar Specification
Olympic lifting and CrossFit benefit from a 28–28.5mm shaft with needle bearings for smooth rotation during cleans, snatches, and jerks. Powerlifting favours a stiffer bar with more aggressive knurling for squats, deadlifts, and bench press. This bar's 28mm shaft and needle bearings make it the stronger choice for versatile or Olympic-oriented training.

Budget and Build Quality in Australia
Entry-level 20kg Olympic barbells typically start from AUD $100–$250 for light home use. Mid-range bars with needle bearings run $300–$500. Commercial-grade bars like this one — with 190,000 PSI steel, needle bearings, and high load ratings — represent a long-term investment with a significantly extended service life.

Finish and Corrosion Resistance
Black zinc offers solid corrosion resistance at a practical price point and is the most common finish in Australian gym environments. Hard chrome and Cerakote offer greater protection at a higher price premium. For most gym settings, black zinc is the balanced choice.

Frequently Asked Questions

Is this barbell suitable for CrossFit and Olympic lifting?

Yes. The 28mm shaft and 8 needle bearing rotation are engineered for Olympic lifts — cleans, snatches, and jerks — as well as high-repetition functional training in CrossFit programming. No centre knurl prevents abrasion in clean and front rack positions.

What does the 1,500lb / 680kg rating mean in practice?

The load rating reflects the bar's structural limit under static load. Most users will never approach this weight. The high rating primarily indicates long-term durability — the bar resists permanent bending under repeated heavy use in a commercial environment over many years.

Will this bar fit my power rack and weight plates?

Yes. This is a full-size 2.2m Olympic barbell with 50mm sleeves, compatible with all Australian power racks, squat stands, bumper plates, and Olympic weight plates. If your rack was built for an Olympic barbell, this bar will fit.

What is the standard weight of an Olympic barbell?

The standard men's Olympic barbell weighs 20kg. The standard women's Olympic barbell weighs 15kg with a 25mm shaft. Both use 50mm Olympic sleeves compatible with all standard plates and bumper plates.

Where can I buy this barbell in Sydney?

Inspect and purchase in person at our Milperra NSW showroom — 10/202 Milperra Road, Milperra NSW 2214. We serve customers from Bankstown, Liverpool, Parramatta, and Greater Western Sydney, and ship Australia-wide with fast metro delivery.

What features make a barbell durable long-term?

Key factors: tensile strength of 190,000 PSI or higher, a needle bearing rotation system, consistent well-cut knurling, a corrosion-resistant finish (black zinc, hard chrome, or Cerakote), and a commercial-grade load rating of 680kg or above.

How much should I spend on a quality Olympic barbell in Australia?

Reliable home-use bars start around AUD $100–$250. Mid-range commercial options with needle bearings sit in the $300–$500 range. Premium bars with highest-grade steel and Cerakote or hard chrome finishes exceed $600. Higher spend delivers better spin quality, finish durability, and a significantly longer service life.

Related searches: 20kg Olympic barbell Australia · needle bearing barbell Sydney · CrossFit barbell NSW · Olympic barbell Milperra · commercial Olympic barbell for sale · best Olympic barbell Australia · 42CrMo barbell · 1500lb rated barbell · home gym barbell Australia · buy barbell online Australia

20KG Olympic Barbell – 7FT Chrome Bar for Deadlifts, Squats and Bench Press - 24/7 Gym Equipment

Australia’s Best Olympic Barbell – Deadlifts, Squats, Bench Press, Bronze Bushings, Olympic Lifting, Durable Strength Training Bar

Heavy-Duty 20KG Olympic Barbell with Bronze Bushings and 500LB Capacity - 24/7 Gym Equipment

20KG Olympic Barbell | Heavy-Duty Olympic Bar Australia

🚚 In Stock – Ready to Ship

⭐ Unbeatable Quality and Value

(1)

~~$263.00~~ $185.00

In Stock — Ships from Sydney 🏋️ On Display — Milperra Showroom 🚚 Fast Australia-Wide Delivery

20KG Olympic Barbell — 7FT Chrome Bar 226KG Rated | Deadlifts, Squats & Bench Press | Australia

The 20KG 7FT Olympic Barbell is the foundation of every serious home gym, PT studio and commercial facility in Australia. With a 226KG (500LB) load capacity, bronze bushings for smooth sleeve rotation, and medium-depth dual-mark knurling, this bar handles every major compound lift — deadlifts, squats, bench press, overhead press, cleans and rows — without compromise. Compatible with all standard 50mm Olympic plates and fits every squat rack and power rack on the market.

20KG Bar Weight

226KG Load Capacity

7FT Bar Length

28mm Shaft Diameter

What makes this Olympic barbell different from standard bars?
Standard barbells max out at 100–200kg and have fixed sleeves — unsafe for dynamic lifts like cleans and snatches. This 20KG Olympic barbell is rated to 226KG, features rotating bronze bushing sleeves that protect your wrists during dynamic movements, and uses the universal 50mm Olympic sleeve standard compatible with all bumper and iron plates. It's designed to last 5–15 years in commercial use — not 1–2 years like a standard bar.

Key Features

Built for Serious Strength Training

⚖️

226KG Load Capacity 500LB rated — handles heavy deadlifts, squats and bench press loads for both home and commercial gym use

🔄

Bronze Bushing Sleeves Smooth, consistent sleeve rotation reduces wrist strain during Olympic lifts, cleans and dynamic movements

✋

Medium-Depth Dual Knurling Confident grip without tearing hands — dual markings for both Olympic and powerlifting hand placement

🚫

No Centre Knurl Ideal for front squats, cleans and CrossFit workouts — eliminates neck and shoulder discomfort

✨

Chrome-Plated Finish Corrosion-resistant coating — suited to Australian garage gyms, humid conditions and daily commercial use

🏋️

Universal 50mm Sleeves Compatible with all Olympic bumper plates and iron plates — no adapter needed for any standard plate brand

Understanding the Knurling

Grip Explained

📍 Dual Markings Olympic-width and powerlifting-width grip marks — one bar works for every lifting style

🤝 Medium Depth Aggressive enough to hold heavy loads — not so harsh it tears your palms during high-rep sets

🚫 No Centre Knurl Smooth centre section — ideal for front squats, cleans and barbell cycling in CrossFit workouts

What Can You Do With This Barbell?

Full Exercise Library

Compound Strength Lifts

Back squat & front squat
Conventional & sumo deadlift
Flat bench press
Incline & decline bench press
Overhead press (OHP)
Barbell hip thrust

Olympic & Power Movements

Power clean & hang clean
Snatch & power snatch
Clean & jerk
Romanian deadlift (RDL)
Good mornings
Push press & push jerk

Accessory & Hypertrophy

Barbell bent-over row
Barbell bicep curl
Skull crushers
Barbell lunge & step-up
Pendlay row

CrossFit & Functional

Thrusters
Barbell cycling (touch & go)
Hang power clean
Barbell complex training
Death by barbell WODs

Specifications

Technical Details

Bar Weight	20KG
Total Length	2200mm (7FT)
Sleeve Length	415mm per side
Inside Sleeve Space	1310mm
Shaft Diameter	28mm
Sleeve Diameter	50mm (Olympic standard)
Load Rating	500LB / 226KG
Bushing Type	Bronze bushings
Knurling	Medium depth, dual-mark, no centre knurl
Finish	Chrome-plated steel
Plate Compatibility	All 50mm Olympic plates (bumper & iron)
Rack Compatibility	All standard squat racks and power racks
Best For	Powerlifting, Olympic lifting, CrossFit, home & commercial gyms

Olympic Barbell vs Standard Barbell

Which Bar Do You Need?

Feature	Standard Barbell	This 20KG Olympic Bar
Load Capacity	100–200kg max	226KG rated
Sleeve Rotation	Fixed — no spin	Bronze bushing rotation
Safe for Olympic Lifts	No — unsafe	Yes — designed for it
Sleeve Diameter	25mm (incompatible)	50mm Olympic standard
Lifespan (Commercial)	1–3 years	5–15 years
CrossFit Compatible	Not suitable	Yes — no centre knurl
Dual Knurl Markings	Rarely	Yes — Olympic & power

Who Is This Barbell Best For?

For Every Type of Lifter

Home gym owners — the best first barbell purchase for a garage or home gym setup in Australia
Powerlifters — 226KG rated for heavy deadlifts, squats and bench press progression
Olympic weightlifters — bronze bushing spin and no centre knurl for clean, snatch and jerk training
CrossFit athletes — no centre knurl for barbell cycling, thrusters and complex WODs
PT studios & commercial gyms — chrome finish and commercial-grade construction for daily multi-user use
Beginners — standard 20KG Olympic weight is the universal starting point for all barbell training programs

Delivery & Pickup

🚚 Fast Australia-Wide Delivery Ships from our Sydney warehouse to Sydney, Melbourne, Brisbane, Adelaide, Perth & all regional areas

📦 Free Sydney Metro Delivery On orders over $2,500. Professional assembly available in Sydney Metro on request

🏪 Warehouse Pickup — Milperra NSW 10/202 Milperra Road, Milperra NSW 2214. Mon–Fri 9am–5pm | Sat 9am–1pm

Frequently Bought Together

Complete Your Setup

Frequently Asked Questions

Common Questions

What is an Olympic barbell and how is it different from a standard bar?

An Olympic barbell weighs 20KG (men's standard), measures 2.2m (7FT) in length, and features 50mm rotating sleeves compatible with all Olympic plates. Unlike standard barbells — which have fixed 25mm sleeves and max out at 100–200kg — Olympic bars are engineered for dynamic lifts like cleans, snatches and heavy deadlifts. They last 5–15 years in commercial use compared to 1–3 years for standard bars.

What plates fit this 20KG Olympic barbell?

This bar uses 50mm (2 inch) Olympic sleeves — the universal standard for all commercial gym plates. It is compatible with bumper plates, cast iron plates, rubber-coated iron plates and competition plates from any brand. Standard 25mm plates will not fit. We stock a full range of compatible Olympic plates available separately.

Is this barbell suitable for heavy deadlifting?

Yes. With a 226KG (500LB) rated capacity, this bar handles heavy conventional and sumo deadlifts. The 28mm shaft diameter and medium-depth knurling give a confident grip even under maximum load. For elite powerlifters pulling over 200KG regularly, we recommend pairing with barbell lock jaw collars for added safety.

What is the best 20KG Olympic barbell for a home gym in Australia?

For Australian home gym owners, the ideal 20KG Olympic barbell needs corrosion resistance (for garage and shed conditions), universal 50mm compatibility, a load rating above 200KG and smooth sleeve rotation. This chrome-plated bar with bronze bushings meets all four criteria — and is stocked locally in our Sydney warehouse for fast delivery to all Australian states including NSW, VIC, QLD, SA and WA.

Is this bar suitable for Olympic weightlifting — cleans and snatches?

Yes. The bronze bushing sleeves provide smooth, controlled spin essential for Olympic lifts where the plates must stay stable while the bar rotates in your hands. The no centre knurl design also eliminates shoulder and neck discomfort during front squats and cleans — a key requirement for Olympic weightlifting and CrossFit training.

Will this barbell fit my squat rack or power rack?

Yes. At 2200mm (7FT) total length with a 1310mm inside sleeve space, this bar fits all standard squat racks and power racks including J-hooks, safeties and monolift attachments. It is compatible with our full range of power racks and squat racks available on the 24/7 Gym Equipment website.

Do you deliver Olympic barbells to Melbourne, Brisbane and Adelaide?

Yes — we deliver Australia-wide from our Sydney warehouse to all states and territories including Melbourne (VIC), Brisbane (QLD), Adelaide (SA), Perth (WA), Canberra (ACT), Newcastle, Wollongong, Gold Coast and regional areas. Pickup is also available from our Milperra NSW warehouse and interstate depot locations.

Is a 20KG barbell too heavy for beginners?

The 20KG Olympic bar is the universal standard for all strength training programs including Starting Strength, StrongLifts 5x5 and beginner powerlifting. Most beginners start with just the bar and add weight progressively. If 20KG is too heavy initially, technique bars (10–15KG) are available — but investing in a full Olympic bar from the start means you will never need to upgrade as your strength develops.

Full view of 20kg Olympic Barbell 2.2m with hard chrome finish and 700lb weight capacity for home gym strength training. - 24/7 Gym Equipment

Close up detail of 28mm barbell shaft showing medium diamond knurling and passive centre knurl for secure grip during squats and presses.- 24/7 Gym Equipment

50mm Olympic barbell sleeve end featuring bronze bushings for smooth rotation and snap ring construction to secure internal mechanisms - 24/7 Gym Equipment

20KG Olympic Barbell 2.2m | 320kg Load Capacity | Strength Training

🚚 In Stock – Ready to Ship

(0)

~~$310.00~~ $155.00

In Stock — Sydney Warehouse 🏋️ Men's Olympic Standard — 20KG / 28mm / 2.2m 700LB / 320KG RATED 🚚 Fast Australia-Wide Delivery

The 20KG Olympic Barbell is the global standard for men's strength training — the same weight and dimensions used in powerlifting gyms, CrossFit boxes, home gym setups and commercial facilities worldwide. At 2200mm (2.2m) total length with a 28mm shaft diameter, it fits all standard power racks, squat stands and Olympic plate storage systems. Rated to 700LB (320KG) with a bronze bushing rotation system for smooth, controlled sleeve spin on every lift. The chrome finish resists corrosion for long-term performance in Australian garage gyms, studios and training facilities across Sydney, Melbourne, Brisbane, Adelaide and Perth. The medium knurl with centre knurl locks the bar securely in place on back squats — the detail that separates a proper strength bar from a general-purpose bar.

20KGBar Weight

2.2mTotal Length

320KG700LB Load Capacity

28mmShaft Diameter

Why is the 20KG / 2.2m / 28mm specification the global standard?
These three numbers define the men's Olympic bar standard used in powerlifting, weightlifting and functional fitness worldwide. The 20KG bar weight is the baseline load for all major lifting programmes. The 2.2m length is the minimum needed to fit power rack J-hooks with standard spacing and leave enough sleeve for a full plate load. The 28mm shaft is the sweet spot — wide enough for grip security under heavy loads, narrow enough to maintain bar flex for Olympic movements. Any serious barbell programme starts with this specification.

Why This Is the Right Bar

3 Reasons Athletes Choose This Bar

✋ Centre Knurl for Squat Security The centre knurl grips your upper back during back squats — preventing bar roll and improving stability under heavy loads. Missing on many budget bars

🔄 Bronze Bushing Rotation Smooth, controlled sleeve spin for consistent rep performance — suited to compound strength training, CrossFit and Olympic lifting technique work

✨ Chrome Finish — Built for Longevity Full chrome coating resists corrosion in garage gym conditions — easier to maintain than bare steel or black zinc in Australia's humid coastal environments

Key Features

Everything That Matters on a Strength Bar

⚖️

20KG / 2.2m — Men's Olympic StandardThe international standard for men's Olympic and powerlifting — 2200mm total length fits all power racks, squat stands and Olympic bar storage systems

📏

28mm Shaft DiameterStandard grip diameter across powerlifting and functional fitness — provides confident hand wrap and grip security under heavy compound loads

🔄

Bronze Bushing Sleeve RotationControlled smooth sleeve spin for consistent performance across squats, deadlifts, bench press and Olympic pulling movements — reliable for daily training volume

✋

Medium Knurl with Centre KnurlDual hand position markings for powerlifting and Olympic grip width. Centre knurl prevents bar slip on back squats — a feature absent on many budget Olympic bars

✨

Chrome Finish — Corrosion ResistantFull chrome coating on shaft and sleeves — resists rust and corrosion in Australian garage gyms and humid environments; easier to maintain than bare steel

🔩

50mm Olympic SleevesUniversal Olympic sleeve standard — compatible with all bumper plates, cast iron Olympic plates and rubber-coated plates from any brand

What Can You Train With This Bar?

Full Exercise Library

The Big Compound Lifts

Back squat (centre knurl grip)
Conventional deadlift
Sumo deadlift
Bench press
Overhead press (OHP)

Pulling & Rowing

Bent-over barbell row
Pendlay row
Romanian deadlift (RDL)
Barbell hip thrust
Rack pull — partial deadlift

Olympic & Functional

Power clean & hang clean
Push press & push jerk
Front squat
Barbell cycling (WODs)
Thrusters

Accessory & Isolation

Barbell curl — EZ & straight
Skull crusher (lying tricep extension)
Good mornings
Barbell shrug
Landmine press & rotation

Specifications

Technical Details

Bar Weight	20KG — men's Olympic standard
Total Length	2200mm (2.2m)
Shaft Diameter	28mm
Sleeve Diameter	50mm — universal Olympic plate standard
Maximum Load Capacity	700LB / 320KG
Rotation System	Bronze bushings — smooth controlled sleeve spin
Knurling	Medium depth with centre knurl — dual hand position markings
Finish	Chrome — corrosion-resistant, low maintenance
Plate Compatibility	All 50mm Olympic plates — bumper plates, cast iron, rubber-coated
Rack Compatibility	Fits all standard power racks, squat stands and Olympic rigs
Best For	Powerlifting, strength training, CrossFit, home gyms, PT studios, commercial facilities
Delivery	Australia-wide — Sydney, Melbourne, Brisbane, Adelaide, Perth

How Does This Bar Compare?

Bushing Bar vs Budget Bar vs Bearing Bar

Feature	Budget Olympic Bar	This 20KG Bushing Bar	Needle Bearing Bar
Load Capacity	150–200KG typical	320KG / 700LB	400KG+
Sleeve Rotation	Stiff or inconsistent	Bronze bushing — smooth & controlled	Needle bearing — high spin
Centre Knurl	Often absent	Yes — back squat security	Varies by model
Finish	Bare steel / basic coat	Chrome — corrosion resistant	Hard chrome or Cerakote
Best For	Light use only	Daily strength training & CrossFit	Olympic lifting competition
Price Range (AUD)	$80–$150	Mid-range — best value for daily use	$400–$800+

Who Is This Best For?

The Right Bar For

Home gym owners — the 20KG Olympic barbell is the single most important piece of equipment in any home gym; this bar covers every major compound lift with a 320KG capacity that won't be outgrown
Powerlifting & strength athletes — 28mm shaft, centre knurl and bronze bushing rotation covers squats, deadlifts and bench press with the stability and grip security these lifts demand
CrossFit & functional fitness athletes — smooth bushing rotation handles barbell cycling for WODs; 50mm sleeves are compatible with all bumper plate setups in CrossFit boxes and home gyms
PT studios & personal trainers — a reliable mid-range 20KG bar for client strength training; the centre knurl and chrome finish hold up to daily multi-client use better than budget alternatives
Beginner to intermediate lifters — the 20KG men's standard is the correct bar to train on from day one; buying the right bar once is better than starting on a budget bar and upgrading later
Garage gym builders in Australia — chrome finish handles the humidity of Australian coastal and garage environments significantly better than bare steel or budget finishes

Honest Assessment

Pros & Cons

✓ Pros

700LB / 320KG capacity — well above what most home gym athletes will ever load
Centre knurl — prevents bar roll on back squats (missing on many budget bars)
Bronze bushing rotation — smooth, consistent sleeve spin for daily training volume
Chrome finish — corrosion resistant in garage and humid environments
28mm shaft — universal grip standard for power racks, chalk and lifting straps
Fits all 50mm Olympic plates and standard power racks
Stocked locally in Sydney — fast dispatch Australia-wide

✗ Cons

Bronze bushings spin slower than needle bearings — not ideal for competitive Olympic weightlifting snatches and cleans
320KG capacity is below elite powerlifting totals — advanced competition lifters should consider a higher-rated power bar
Chrome requires occasional oiling to maintain long-term in very humid environments

Visit Our Sydney Showroom

📍

Inspect In Person — Sydney 10/202 Milperra Road, Milperra NSW 2214 — feel the 28mm knurl, test the sleeve rotation and compare against other bars in our range before buying 📍 Get Directions

🕘

Showroom Hours Mon–Fri 9am–5pm · Sat 9am–1pm · Closed Sunday Our team can advise on whether this bar, the 15KG women's bar or an elite bearing bar is the right choice for your training programme

💬

Expert Barbell Advice Phone: 1300 247 888 · WhatsApp: +61 412 029 000 — we help you choose between bushing and bearing bars, compare finishes and match the bar to your rack

Delivery & Pickup

🚚Fast Australia-Wide DeliverySydney Metro: 1–2 days · Melbourne & Brisbane: 2–3 days · Adelaide & Perth: 3–5 days · All states and territories

📦Securely PackagedBar arrives individually packaged and protected — sleeves and shaft protected during freight transit. Ready to load and train on arrival

🏪Pickup — Milperra NSW10/202 Milperra Road, Milperra NSW 2214 · Mon–Fri 9am–5pm · Sat 9am–1pm

Frequently Bought Together

Complete Your Setup

⚫ Olympic Weight Plates & Bumper Plates → 🏋️ All Barbells → 🏗️ Power Racks & Squat Racks → 🟫 Rubber Gym Flooring →

Frequently Asked Questions

Common Questions

What is a 20KG Olympic barbell and is it the right bar for me?

A 20KG Olympic barbell is the international standard for men's strength training — 20kg bar weight, 2.2m total length, 28mm shaft and 50mm sleeves. It is the correct bar for squats, deadlifts, bench press, overhead press, rows and Olympic lifts. If you are training any standard barbell programme (Starting Strength, 5/3/1, GZCLP, CrossFit or any linear progression), this is the bar those programmes are written around. For most people, this is the only barbell they will ever need.

What is the difference between a 28mm and 29mm barbell shaft?

A 28mm shaft is standard for Olympic lifting bars — it provides a slightly thinner grip diameter that suits hook grip, mixed grip and chalk-assisted pulling. It also allows a little more bar flex (whip) for Olympic movements. A 29mm shaft is common on dedicated powerlifting bars — the extra millimetre increases stiffness, reducing whip under near-maximal squat and deadlift loads. For general strength training, CrossFit and mixed programmes, 28mm is the versatile choice that works equally well for Olympic lifts and heavy compound movements.

What does a centre knurl do and why does it matter?

The centre knurl is the knurled section in the middle of the shaft, between the two grip zones. During back squats, the bar rests across your upper back — the centre knurl grips the fabric of your shirt or your bare skin and prevents the bar from rolling or sliding during heavy sets. Many budget Olympic bars omit the centre knurl to simplify manufacturing. This bar includes it, making it a safer and more stable option for heavy back squat training. Note: if you do a lot of front squats or cleans, a centre knurl can be uncomfortable against the throat — this is worth considering for Olympic-focused programmes.

Bronze bushings vs needle bearings — which is better for strength training?

Bronze bushing bars provide smooth, controlled sleeve rotation — the sleeve spins, but not excessively. This is ideal for compound strength work (squats, deadlifts, bench press) and CrossFit barbell cycling where consistent, predictable spin matters. Needle bearing bars have much faster, freer spin — preferred by competitive Olympic weightlifters for snatches and cleans where the bar must rotate rapidly relative to the hands during the catch. For most home gym owners, PT studios and CrossFit athletes, a bronze bushing bar is the correct choice — the performance difference only becomes relevant for competitive Olympic lifting at high loads.

Will this bar fit my power rack and what plates are compatible?

At 2200mm total length, this bar fits all standard power racks, squat stands and Olympic rigs with standard J-hook spacing — the same length as any men's competition Olympic bar. The 50mm sleeves are the universal Olympic standard — compatible with all bumper plates, cast iron Olympic plates and rubber-coated plates with a 50mm centre hole. Standard 25mm or 30mm plates will not fit. If you are unsure about your rack's J-hook spacing or plate compatibility, contact us — our team can confirm fit before you order.

Is a 320KG / 700LB load capacity enough for serious training?

For the vast majority of lifters, 320KG (700LB) is more than sufficient. An elite male powerlifter totalling 800kg+ across three lifts might approach this limit in training, but recreational and intermediate lifters will never come close. To put it in perspective — 320KG is 706lb, and a 300kg deadlift is a world-class lift for recreational athletes. This bar's capacity supports serious progressive strength training for many years without ever becoming a limiting factor. Only elite competitive powerlifters should consider a higher-rated bar.

How do I maintain a chrome barbell?

Chrome barbells are among the lowest-maintenance finishes available. After each session, wipe the bar down with a dry cloth to remove sweat, chalk and moisture. Every 1–3 months, apply a light coat of 3-in-1 oil or barbell-specific oil to the shaft and sleeves — this maintains the chrome and keeps the bushing system running smoothly. Use a stiff nylon brush to remove chalk buildup from the knurling periodically. Avoid leaving the bar in standing water or direct outdoor exposure. With basic maintenance, chrome lasts many years in Australian garage and studio environments.

Where can I buy a 20KG Olympic barbell in Australia?

You can order online with fast delivery Australia-wide — Sydney, Melbourne, Brisbane, Adelaide, Perth and all regional areas. If you are in Sydney, visit our Milperra showroom (10/202 Milperra Road, Milperra NSW 2214) to feel the 28mm grip, test the sleeve rotation and compare against other bars in our range in person. Local pickup is available. Contact us on 1300 247 888 or WhatsApp +61 412 029 000 for stock availability and buying advice.

20KG Olympic Barbell — Delivery Areas Australia:
Sydney (NSW) · Parramatta · Bankstown · Liverpool · Penrith · Blacktown · Campbelltown · Bondi · Chatswood · Manly · Castle Hill · Northern Beaches · Inner West · Sutherland Shire · Ryde · Hurstville · Melbourne (VIC) · Brisbane (QLD) · Adelaide (SA) · Perth (WA) · Canberra (ACT) · Gold Coast · Newcastle · Wollongong · Sunshine Coast · Geelong · Ballarat · Hobart (TAS) · Darwin (NT) · Cairns · Central Coast

Olympic & Standard Barbells for Strength Training – Shop All Sizes Online

In Stock — Sydney Milperra Warehouse 🏋️ 190,000–210,000 PSI Steel ⚡ Up to 907KG / 2000LB Rated 🚚 Fast Australia-Wide Delivery

Barbells Australia — Olympic, Powerlifting, EZ Curl & Trap Bars 20KG Men's | 15KG Women's | 190,000 PSI Steel | Sydney Showroom | 24/7 Gym Equipment

Q: Are your barbells suitable for CrossFit and high-repetition lifting?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Absolutely. Our Olympic bars are designed with needle bearing systems that provide a smooth, consistent sleeve rotation. This reduces the torque on your wrists during explosive movements like cleans, snatches, and high-rep workouts."}]}]}

Q: Which barbell is best for a professional powerlifting setup?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"The "},{"type":"text","value":"20KG Olympic Power Barbell | 2000LB Capacity","bold":true},{"type":"text","value":" is our top-tier choice. With a 210k PSI rating, an 8-needle bearing rotation system for smooth lifts, and a passive centre knurl for extra grip during squats, it is engineered for high-use commercial and serious home gyms."}]}]}

Q: Does 24/7 Gym Equipment ship barbells Australia-wide?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Yes, we provide fast shipping across Australia, including Sydney, Melbourne, Brisbane, Perth, and Adelaide. Most orders are dispatched from our NSW warehouse the next business day to ensure you can get training as soon as possible."}]}]}

Q: Where can I buy high-quality barbells in Sydney?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"You can purchase our full range of Olympic and specialty barbells online or visit our Sydney showroom at 10/202 Milperra Road, Milperra NSW 2214. We offer \"Inspect Before You Buy\" and local Click & Collect options."}]}]}

Q: Can I use standard weight plates on 24/7 Gym Equipment specialty bars?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"No. Our EZ Curl and Tricep bars are \"Olympic\" grade, meaning they feature 50mm sleeves. You must use Olympic-sized weight plates (bumper or iron) with a 50mm centre hole."}]}]}

Q: What are the benefits of using an Olympic Tricep Bar (Hammer Curl Bar)?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"The Olympic Tricep Bar features vertical parallel grips. This neutral hand position keeps your wrists aligned, making it the best tool for heavy isolation movements like hammer curls and tricep extensions while minimising joint pain."}]}]}

Q: Is an EZ Curl Bar better than a straight barbell for arm training?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Yes, for most lifters. The angled, cambered grip of an EZ Curl Bar allows for a semi-supinated hand position, which significantly reduces strain on the wrists and elbows compared to a straight bar. It is the preferred choice for bicep curls and skull crushers."}]}]}

Q: How do I maintain my barbell to prevent rust in Australian conditions?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Our barbells feature high-quality Hard Chrome or Polished Chrome finishes designed to resist corrosion. However, for gym owners in coastal or humid Australian areas, we recommend wiping the bar down after use to remove sweat and occasionally applying a light coat of 3-in-1 oil to the knurling to maintain the finish."}]}]}

Q: Why is "Tensile Strength" (PSI) important when choosing a barbell?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Tensile strength, measured in PSI, determines how much tension a bar can handle before breaking or permanently bending. Our "},{"type":"text","value":"Elite 20kg Power Barbell","bold":true},{"type":"text","value":" features "},{"type":"text","value":"210,000","bold":true},{"type":"text","value":" "},{"type":"text","value":"PSI","bold":true},{"type":"text","value":" steel, making it professional-grade and ideal for heavy powerlifting, squats, and deadlifts without losing its \"whip\" or shape."}]}]}

Q: What is the difference between an Olympic Barbell and a Standard Barbell?

{"type":"root","children":[{"type":"paragraph","children":[{"type":"text","value":"Olympic Barbells ","bold":true},{"type":"text","value":"feature "},{"type":"text","value":"50mm","bold":true},{"type":"text","value":" (2-inch) diameter sleeves designed for Olympic weight plates and are typically rated for much higher weight capacities, such as our "},{"type":"text","value":"2000lb","bold":true},{"type":"text","value":" Elite series. Standard Barbells have "},{"type":"text","value":"25mm (1-inch) ","bold":true},{"type":"text","value":"sleeves and are suited for lighter, entry-level home gym setups."}]}]}

A quality barbell is the single most important investment in any training space — home gym, PT studio or commercial facility. 24/7 Gym Equipment supplies a complete range of commercial-grade barbells across Australia: 20KG men's Olympic bars, 15KG women's Olympic bars, powerlifting bars, EZ curl bars, trap bars and technique barbells — all built from 190,000–210,000 PSI high-tensile steel and rated to 500LB–2000LB (227–907KG). Every bar is stocked at our Sydney Milperra warehouse, available for same-day pickup or fast tracked freight to Melbourne, Brisbane, Adelaide and Perth.

190K–210KPSITensile Strength

907KGMax Load Rating

25–29mmShaft Options

12+Bar Models In Stock

Find Your Bar

Which Barbell Do You Need?

🥇 Olympic Barbell — 20KG The global men's standard — 2.2m length, 28mm shaft, 50mm rotating sleeves. Handles squats, bench, deadlifts, rows and Olympic lifts. Rated to 500LB–2000LB depending on model. Best for: Strength training · CrossFit · Olympic lifting · Home & commercial

⚡ Women's Olympic Bar — 15KG IWF women's standard — 25mm shaft for smaller hands and superior hook grip. Same 50mm sleeves, fully compatible with all Olympic plates and bumper plates. Best for: Female lifters · Olympic weightlifting · CrossFit Rx

💪 Powerlifting Bar 29mm shaft, aggressive IPF-spec knurling, controlled bushing rotation. Stiffer under maximal loads for competition-standard squats, bench press and deadlifts. Best for: Powerlifters · Strength athletes · Competition prep

🔷 Trap Bar / Hex Bar Neutral grip positions load in line with your centre of gravity — reduces lower back stress significantly. Ideal for deadlifts, loaded carries, shrugs and athletic jump training. Best for: Beginners · Athletes · Injury prevention · PT studios

🌀 EZ Curl Bar Angled grip reduces wrist and elbow stress during curls, skull crushers and tricep extensions. An essential accessory bar for any complete gym setup. Best for: Arm training · Wrist comfort · Accessory lifts

📏 Technique Barbell — 150cm Compact 1.5m bar — 453KG rated. Fits garage gyms, small training rooms and spaces where a full 2.2m bar cannot be used safely. Full Olympic sleeve compatibility. Best for: Compact home gyms · Tight spaces · Olympic technique work

What to Look For

5 Barbell Specs That Actually Matter

Tensile Strength (PSI)

How much force a bar absorbs before permanently bending. Serious lifting needs 180,000+ PSI. Our Elite bars use 190,000–210,000 PSI for superior performance and decades of longevity.

Rotation — Needle Bearings vs Bronze Bushings

Needle bearings = fast spin for Olympic lifts (snatch, clean & jerk). Bronze bushings = controlled rotation for powerlifting and general strength. Hybrid bars suit CrossFit and mixed training.

Knurling Pattern & Depth

Aggressive IPF-spec knurling for powerlifters needing maximum grip security. Moderate IWF-spec knurling for Olympic lifters and CrossFit athletes. Dual marks indicate competition-grade bars.

Finish & Corrosion Resistance

Hard chrome: Most durable — best for coastal Australia and commercial gyms. Black zinc: Great look, solid protection. Bare steel: Best feel, needs regular oiling to prevent rust.

Load Capacity Rating

Entry-level bars: 500LB (226KG). Our Elite Olympic bars: tested to 2,000LB (907KG). For commercial use, always select a bar rated above your strongest expected lifter's training loads.

Side by Side

Olympic Bar vs Standard Bar

✅ Olympic Barbell — Why It Wins	⚠️ Standard Barbell — Limitations
Rated 500LB–2,000LB depending on model	Typically limited to 200–250KG max load
Rotating 50mm sleeves reduce wrist torque on all lifts	Fixed 25mm sleeves — no rotation, higher wrist stress
Compatible with all Olympic plates and bumper plates	Only compatible with standard 25mm plates
High-tensile steel — withstands heavy loading and drops	Lower-grade steel — can permanently bend under load
Industry standard in every commercial gym worldwide	Not suitable for competitive lifting or progressive overload
Long-term investment — lasts decades with proper care	Lower upfront cost but limited lifespan under serious use

Why Choose 24/7 Gym Equipment

What Makes Us Different

🏭

190,000–210,000 PSI Commercial SteelTested to 2,000LB (907KG) — built for real athletes, not just catalogue specs. The same standard used in commercial lifting facilities

📍

Sydney Showroom — Test Before You Buy10/202 Milperra Road, Milperra NSW 2214 — feel knurling depth, test sleeve rotation and compare finishes side by side before committing

🚚

Daily Dispatch in Reinforced TubesFull tracking to every Australian postcode — Sydney 1–2 days, Melbourne & Brisbane 2–3 days, Perth & regional 4–7 days

🔩

Complete Range Always In StockOlympic, powerlifting, women's, trap, EZ curl and technique bars — all available now from our Sydney warehouse, no waiting on import delays

💬

Expert Pre-Sale AdvicePhone 1300 247 888 or WhatsApp +61 412 029 000 — we match you to the right bar for your training goals, rack, space and budget

🌏

Trusted Across AustraliaSupplying home gym owners, PT studios, CrossFit boxes and commercial gyms across every state and territory since our founding

Who Do We Supply?

The Right Bar for Every Lifter

Home gym owners — a 20KG Olympic bar is the single most important piece of equipment in any home gym; our range covers every budget from a reliable bushing bar through to needle bearing Elite models
Female athletes & CrossFit women — 15KG / 25mm women's bars in bushing and needle bearing models; the correct IWF-standard bar for technique work, WODs and competition preparation
Powerlifters & strength athletes — 29mm stiff shafts, aggressive IPF-spec knurling, controlled bushing rotation for maximum stability under near-maximal squat, bench and deadlift loads
PT studios & boutique gyms — commercial-grade Olympic bars built for daily multi-client use; EZ curl bars and trap bars to cover every client programme without buying multiple machines
CrossFit boxes & functional fitness facilities — needle bearing bars rated for drops on bumper plates; bushing bars for high-rep cycling WODs where consistent rotation matters
Beginners building their first home gym — a quality 20KG or 15KG Olympic bar from day one grows with your training and is compatible with every plate you'll ever buy

Sydney Showroom & Warehouse

📍

Test Barbells In Person 10/202 Milperra Road, Milperra NSW 2214 — handle bars, feel knurling depth, test sleeve rotation and compare finishes side by side. No appointment needed 📍 Get Directions

🕘

Showroom Hours Mon–Fri 9am–5pm Sat 9am–1pm Closed Sunday Same-day pickup available for in-stock bars

📞

Not Sure Which Bar? 📞 1300 247 888 💬 WhatsApp: +61 412 029 000 We match you to the right bar for your training, rack and budget before you buy

Delivery & Pickup Options

Fast Barbell Delivery Across Australia

📦Sydney MetroSame-day pickup or 1–2 business days · Dispatched in reinforced tubes

📦Melbourne2–3 business days · Full tracking provided

📦Brisbane2–3 business days · Full tracking provided

📦Adelaide3–4 business days · Full tracking provided

📦Perth4–7 business days · Full tracking provided

📦Regional AustraliaAll states & territories · Enquire at checkout

Not Sure Which Barbell Is Right for You?

Our team of strength specialists will help you invest in the right bar — once.

Request a Quote 📞 Call 1300 247 888 💬 WhatsApp Us

Barbell Delivery Areas — Australia:
Sydney (NSW) · Parramatta · Bankstown · Liverpool · Penrith · Blacktown · Campbelltown · Bondi · Chatswood · Castle Hill · Northern Beaches · North Sydney · Inner West · Sutherland Shire · Ryde · Hurstville · Melbourne (VIC) · Richmond · Brunswick · Dandenong · Geelong · Ballarat · Brisbane (QLD) · Gold Coast · Sunshine Coast · Toowoomba · Cairns · Adelaide (SA) · Perth (WA) · Canberra (ACT) · Newcastle (NSW) · Wollongong (NSW) · Hobart (TAS) · Darwin (NT)

Frequently Asked Questions

Are your barbells suitable for CrossFit and high-repetition lifting?

Absolutely. Our Olympic bars are designed with needle bearing systems that provide a smooth, consistent sleeve rotation. This reduces the torque on your wrists during explosive movements like cleans, snatches, and high-rep workouts.

Which barbell is best for a professional powerlifting setup?

The 20KG Olympic Power Barbell | 2000LB Capacity is our top-tier choice. With a 210k PSI rating, an 8-needle bearing rotation system for smooth lifts, and a passive centre knurl for extra grip during squats, it is engineered for high-use commercial and serious home gyms.

Does 24/7 Gym Equipment ship barbells Australia-wide?

Yes, we provide fast shipping across Australia, including Sydney, Melbourne, Brisbane, Perth, and Adelaide. Most orders are dispatched from our NSW warehouse the next business day to ensure you can get training as soon as possible.

Where can I buy high-quality barbells in Sydney?

You can purchase our full range of Olympic and specialty barbells online or visit our Sydney showroom at 10/202 Milperra Road, Milperra NSW 2214. We offer "Inspect Before You Buy" and local Click & Collect options.

Can I use standard weight plates on 24/7 Gym Equipment specialty bars?

No. Our EZ Curl and Tricep bars are "Olympic" grade, meaning they feature 50mm sleeves. You must use Olympic-sized weight plates (bumper or iron) with a 50mm centre hole.

What are the benefits of using an Olympic Tricep Bar (Hammer Curl Bar)?

The Olympic Tricep Bar features vertical parallel grips. This neutral hand position keeps your wrists aligned, making it the best tool for heavy isolation movements like hammer curls and tricep extensions while minimising joint pain.

Is an EZ Curl Bar better than a straight barbell for arm training?

Yes, for most lifters. The angled, cambered grip of an EZ Curl Bar allows for a semi-supinated hand position, which significantly reduces strain on the wrists and elbows compared to a straight bar. It is the preferred choice for bicep curls and skull crushers.

How do I maintain my barbell to prevent rust in Australian conditions?

Our barbells feature high-quality Hard Chrome or Polished Chrome finishes designed to resist corrosion. However, for gym owners in coastal or humid Australian areas, we recommend wiping the bar down after use to remove sweat and occasionally applying a light coat of 3-in-1 oil to the knurling to maintain the finish.

Why is "Tensile Strength" (PSI) important when choosing a barbell?

Tensile strength, measured in PSI, determines how much tension a bar can handle before breaking or permanently bending. Our Elite 20kg Power Barbell features 210,000 PSI steel, making it professional-grade and ideal for heavy powerlifting, squats, and deadlifts without losing its "whip" or shape.

What is the difference between an Olympic Barbell and a Standard Barbell?

Olympic Barbells feature 50mm (2-inch) diameter sleeves designed for Olympic weight plates and are typically rated for much higher weight capacities, such as our 2000lb Elite series. Standard Barbells have 25mm (1-inch) sleeves and are suited for lighter, entry-level home gym setups.

Where can I buy high-quality barbells in Sydney with Australia-wide shipping?

You can buy professional-grade barbells directly from the 24/7 Gym Equipment showroom located at 10/202 Milperra Road, Milperra NSW 2214.We offer a "try before you buy" experience so you can test the knurling and rotation in person.If you aren't in Sydney, we provide fast, reliable shipping across Australia—including Melbourne, Brisbane, Perth, and Adelaide—with most orders dispatched from our NSW warehouse the next business day.

Build Your Dream Gym with 24/7 Gym Equipment

Australia’s Trusted Gym Equipment Store

Shop commercial-grade gym equipment designed for home gyms, PT studios and fitness centres. Fast delivery Australia-wide, depot pick-up, and professional Sydney installation.

Premium Quality Equipment

Fast Delivery Australia-Wide

Sydney Installation Service

Price Match Guarantee

Premium Quality Equipment

Fast Delivery Australia-Wide

Sydney Installation Service

Price Match Guarantee

Premium Quality Equipment

Fast Delivery Australia-Wide

Sydney Installation Service

Price Match Guarantee

Featured collections

17.5KG HEX DUMBBELL - RUBBER COATED - 24/7 Gym Equipment

Dumbbells

10KG HEX DUMBBELL - RUBBER COATED - 24/7 Gym Equipment

37.5 KG HEX DUMBBELLRUBBER COATED - PAIRS - 24/7 Gym Equipment

HEX DUMBBELLRUBBER COATED - PAIRS - 24/7 Gym Equipment

Barbells Australia | 15kg-20kg Olympic & Standard Bars

Let customers speak for us

Olympic & Standard Barbells for Strength Training – Shop All Sizes Online

Barbells Australia — Olympic, Powerlifting, EZ Curl & Trap Bars 20KG Men's | 15KG Women's | 190,000 PSI Steel | Sydney Showroom | 24/7 Gym Equipment

Which Barbell Do You Need?

5 Barbell Specs That Actually Matter

Olympic Bar vs Standard Bar

What Makes Us Different

The Right Bar for Every Lifter

Fast Barbell Delivery Across Australia

Not Sure Which Barbell Is Right for You?

Frequently Asked Questions

Australia’s Trusted Gym Equipment Store

Featured collections

Dumbbells

10KG HEX DUMBBELL - RUBBER COATED (Sold Individually)

7.5KG HEX DUMBBELL - RUBBER COATED (Sold Individually)

15KG HEX DUMBBELL - RUBBER COATED (Sold Individually)

12.5KG HEX DUMBBELL - RUBBER COATED (Sold Individually)

5KG HEX DUMBBELL - RUBBER COATED (Sold Individually)

20KG HEX DUMBBELL - RUBBER COATED (Sold Individually)

PICKUP LOCATION:

10/202 Milperra Road, Milperra NSW 2214

Showroom & Pickup Hours::

PICKUP LOCATION:

10/202 Milperra Road, Milperra NSW 2214

Showroom & Pickup Hours::

Barbells Australia | 15kg-20kg Olympic & Standard Bars

Let customers speak for us

Olympic & Standard Barbells for Strength Training – Shop All Sizes Online

Barbells Australia — Olympic, Powerlifting, EZ Curl & Trap Bars 20KG Men's | 15KG Women's | 190,000 PSI Steel | Sydney Showroom | 24/7 Gym Equipment

Which Barbell Do You Need?

5 Barbell Specs That Actually Matter

Olympic Bar vs Standard Bar

What Makes Us Different

The Right Bar for Every Lifter

Fast Barbell Delivery Across Australia

Not Sure Which Barbell Is Right for You?

Frequently Asked Questions

Related collections

Australia’s Trusted Gym Equipment Store

Featured collections

Dumbbells

10KG HEX DUMBBELL - RUBBER COATED (Sold Individually)

7.5KG HEX DUMBBELL - RUBBER COATED (Sold Individually)

15KG HEX DUMBBELL - RUBBER COATED (Sold Individually)

12.5KG HEX DUMBBELL - RUBBER COATED (Sold Individually)

5KG HEX DUMBBELL - RUBBER COATED (Sold Individually)

20KG HEX DUMBBELL - RUBBER COATED (Sold Individually)

PICKUP LOCATION:

10/202 Milperra Road, Milperra NSW 2214

Showroom & Pickup Hours::

PICKUP LOCATION:

10/202 Milperra Road, Milperra NSW 2214

Showroom & Pickup Hours::