Elite Commercial Power Rack | Heavy Duty Squat Cage & Home Gym Station
119900
210000
$2,100.00$1,199.00
Unit price/ per
In Stock — Sydney Warehouse🏋️ Home & Commercial Grade⚖️ 450kg+ Load Rated🔩 11-Gauge 3mm Steel🚚 Fast Australia-Wide Delivery
Elite Commercial Power Rack — 11-Gauge Steel Squat Cage 450kg+ Load Rated · Multi-Grip Pull-Up Bar · Dip Station · Band Pegs · Home & Commercial Gym | Australia
The Elite Commercial Power Rack is a heavy-duty squat cage built from 11-gauge (3mm) steel in a 75×75mm box section frame — the same specification used in dedicated commercial gym facilities. With a 450kg+ tested load capacity, integrated multi-grip pull-up bar, adjustable dip station, reinforced J-hooks, safety spotter bars and resistance band pegs, this rack delivers a complete strength training environment in a single unit. Finished with a chip-resistant matte black powder coat and weighing 180kg — it is engineered to stay planted under the heaviest compound lifts. Available Australia-wide with delivery to Sydney, Melbourne, Brisbane, Adelaide, Perth and regional areas.
450KG+Load Capacity
11GA3mm Steel Frame
75×75MMBox Section Profile
180KGUnit Weight
Why 11-gauge steel matters — and why thinner racks fail under heavy loads. Most budget power racks use 12–14 gauge steel (2mm or less). Under heavy squats and rack pulls, thinner frames flex, produce lateral movement and amplify bar noise during the lift. The Elite Commercial Power Rack's 11-gauge 3mm steel uprights in a 75×75mm box section stay completely rigid under 450kg+ loading — the same spec found in standalone commercial gym machines. At 180kg, the rack is heavy enough to stay planted without floor bolting, though pre-drilled footplates make bolting possible for maximum security.
What's Included
Everything in the Box — Ready to Train
🏗️
Elite Commercial Power Rack Frame1 piece11-gauge 3mm steel · 75×75mm box section uprights · chip-resistant matte black powder coat · pre-drilled footplates for optional floor bolting
🪝
Reinforced J-Hooks2 pieces — 1 pairHeavy-duty J-hook brackets with protective inner lining — cushions bar knurling and prevents damage to both the hook and barbell during re-racking
🛡️
Safety Spotter Bars2 pieces — 1 pairHeavy-duty horizontal catch bars — set one hole below your lowest working range to catch the bar if you fail a rep during solo bench press, squat or overhead press
💪
Multi-Grip Pull-Up Bar1 pieceMultiple hand positions — wide overhand, narrow overhand, neutral (parallel) and angled grips — for complete lat, bicep and upper back development from a single overhead bar
🦾
Adjustable Dip Station1 pieceMounts to the rack uprights — parallel bar dips for tricep and lower chest development. Adjustable width to suit different shoulder widths and grip preferences
🔗
Resistance Band Pegs4 piecesWelded base pegs for attaching resistance bands to the bar — enables accommodating resistance training for developing explosive strength through the full range of each lift
Key Features
Commercial-Grade From Frame to Footplate
🔩
11-Gauge 3mm Steel Frame75×75mm box section uprights — commercial specification steel that stays completely rigid under 450kg+ loading. Zero flex, zero wobble during heavy compound lifts
⚖️
450kg+ Tested Load CapacityRated and tested for heavy squats, rack pulls, bench press and overhead press. Supports powerlifting-level loads without frame deformation or J-hook movement under load
🦺
Reinforced J-Hooks with Protective LiningThe protective inner lining on each J-hook absorbs bar impact during re-racking and prevents knurling from scoring the hook surface — extends the life of both the rack and your barbell
🛡️
Heavy-Duty Safety Spotter BarsThe safety catch system that makes solo heavy training possible — set them one hole below your lowest safe range and train to failure without a spotter present
💪
Multi-Grip Pull-Up BarWide, narrow, neutral and angled grip positions on a single bar — target different portions of the lats, biceps and upper back without switching attachments or equipment
🦾
Adjustable Dip StationMounts to the uprights to add a full parallel bar dip station to the rack — chest-forward for lower pec activation or upright for tricep isolation, with width adjustment for different shoulder spans
🔗
4 Resistance Band PegsBase-mounted band pegs allow accommodating resistance — banded squats, banded bench and banded deadlifts increase resistance through the strongest range of the lift for developing explosive power
🔩
Pre-Drilled Footplates — Floor Bolt ReadyThe 180kg frame weight provides excellent standalone stability. Pre-drilled footplate holes allow optional floor bolting for maximum security during dynamic movements such as kipping pull-ups
✨
Chip-Resistant Matte Black Powder CoatCommercial-grade powder coating holds up under heavy daily use — bars, collars and plates striking the frame do not chip or flake the finish under normal training conditions
Serious home gym owners — 11-gauge commercial steel and 450kg+ load rating means this rack grows with your strength rather than becoming a limiting factor as loads increase
PT studios and commercial facilities — chip-resistant finish, reinforced J-hooks and heavy-duty spotter bars are rated for daily multi-user loading in high-traffic strength environments
Powerlifters and strength athletes — 450kg+ rated capacity covers elite-level squat, bench and deadlift training; band pegs support accommodating resistance methods used in advanced programming
Bodybuilders and hypertrophy athletes — multi-grip pull-up bar and adjustable dip station add complete upper body pulling and pushing bodyweight training alongside barbell work
Functional athletes and CrossFit training — kipping pull-ups, toes-to-bar, muscle-up progressions and banded movements are all supported by the multi-grip bar and band peg system
Anyone upgrading from a budget rack — if your current rack flexes, wobbles or lacks the height adjustment resolution needed for your training, this is the rack that ends the compromises
Delivery & Installation
🚚Australia-Wide FreightTracked heavy freight to Sydney, Melbourne, Brisbane, Adelaide, Perth & regional areas. Securely palletised for damage-free transit
🏪Depot Pickup AvailableSydney (Milperra NSW) · Melbourne · Brisbane · Adelaide depots — contact us to arrange collection
🔧Installation AvailableProfessional assembly available in select locations — contact us after ordering to check availability in your area
Frequently Asked Questions
Common Questions
11-gauge steel is 3mm thick — the commercial standard for heavy-duty power racks. Budget racks use 12–14 gauge (1.5–2mm), which flexes under heavy loads, producing wobble and noise during lifts. The Elite Commercial Power Rack's 11-gauge 75×75mm frame stays completely rigid under 450kg+ loading. This matters most at maximum effort — when you are at your heaviest squats and rack pulls, you need a frame that gives you zero movement, not one that shifts under load.
The rack is 215.5cm tall, 169cm wide and 145cm deep. We recommend a minimum ceiling clearance of 230–240cm for comfortable pull-up and overhead movement. Most standard Australian residential garages have 2.4m ceilings — sufficient for the rack height with clearance for pull-ups. Measure your ceiling height before ordering and check for overhead obstacles such as garage door tracks, light fittings or structural beams.
The Elite Commercial Power Rack has a 450kg+ tested load capacity. This covers squats, rack pulls, bench press and overhead press at elite powerlifting loads. The J-hooks, spotter bars and frame are all rated to this capacity. If you are working at extreme loads above this range for competition powerlifting, contact us to discuss suitability for your specific programming.
The 180kg unit weight provides substantial stability without floor bolting — the rack will not move during standard barbell training. However, floor bolting is strongly recommended for dynamic movements such as kipping pull-ups, toes-to-bar, muscle-up progressions and any training involving sudden directional force changes. The footplates feature pre-drilled holes for standard floor anchor bolts — hardware and installation method will depend on your floor type (concrete, timber, rubber).
Yes — that is exactly what the safety spotter bars are for. Set the spotter bars one hole below your lowest safe range of motion for each exercise. Perform a dry run with an empty bar to confirm the bars sit correctly before loading up. With the spotter bars correctly positioned, you can train squats, bench press and overhead press to failure without a training partner present — the bar lands on the arms, not on you.
The multi-grip pull-up bar offers wide overhand, narrow overhand, neutral (parallel) and angled grip positions. Wide overhand targets lat width and teres major. Narrow or neutral grip shifts more load onto the biceps and lower lats. The angled grips offer a wrist-friendly transition between pronated and neutral. All variations are accessible from a single bar without changing any attachments.
The four resistance band pegs are welded to the base of the rack frame. Loop a resistance band over the peg and attach the other end to the barbell. As you lift, the band tension increases through the top of the movement — the strongest portion of the lift — adding extra resistance where you are biomechanically most capable. This is called accommodating resistance and is used to develop explosive power and overcome sticking points in squats, bench and deadlifts.
Yes. The 11-gauge commercial steel frame, 450kg+ load rating, chip-resistant powder coat and reinforced J-hooks and spotter bars are all engineered for daily multi-user loading in commercial environments. The rack is used by PT studios, school gyms and commercial strength facilities across Australia. Contact us if you need multiple units for a facility fitout — volume pricing may be available.
The rack comes complete with J-hooks, spotter bars, pull-up bar, dip station and band pegs — everything except the barbell, weight plates and a bench. For bench press you will need an adjustable bench positioned inside the rack. For squats and overhead press you can train with just the rack and a loaded barbell. See the frequently bought together section below for compatible benches, barbells and weight plates.
Elite Commercial Power Rack | Heavy Duty Squat Cage & Home Gym Station
119900
210000
$2,100.00$1,199.00
Unit price/ per
You can receive the package between March 30 and April 01
Fast Delivery
Sign up to be the first to know when it's back in stock.
Note for personalization
In Stock — Sydney Warehouse🏋️ Home & Commercial Grade⚖️ 450kg+ Load Rated🔩 11-Gauge 3mm Steel🚚 Fast Australia-Wide Delivery
Elite Commercial Power Rack — 11-Gauge Steel Squat Cage 450kg+ Load Rated · Multi-Grip Pull-Up Bar · Dip Station · Band Pegs · Home & Commercial Gym | Australia
The Elite Commercial Power Rack is a heavy-duty squat cage built from 11-gauge (3mm) steel in a 75×75mm box section frame — the same specification used in dedicated commercial gym facilities. With a 450kg+ tested load capacity, integrated multi-grip pull-up bar, adjustable dip station, reinforced J-hooks, safety spotter bars and resistance band pegs, this rack delivers a complete strength training environment in a single unit. Finished with a chip-resistant matte black powder coat and weighing 180kg — it is engineered to stay planted under the heaviest compound lifts. Available Australia-wide with delivery to Sydney, Melbourne, Brisbane, Adelaide, Perth and regional areas.
450KG+Load Capacity
11GA3mm Steel Frame
75×75MMBox Section Profile
180KGUnit Weight
Why 11-gauge steel matters — and why thinner racks fail under heavy loads. Most budget power racks use 12–14 gauge steel (2mm or less). Under heavy squats and rack pulls, thinner frames flex, produce lateral movement and amplify bar noise during the lift. The Elite Commercial Power Rack's 11-gauge 3mm steel uprights in a 75×75mm box section stay completely rigid under 450kg+ loading — the same spec found in standalone commercial gym machines. At 180kg, the rack is heavy enough to stay planted without floor bolting, though pre-drilled footplates make bolting possible for maximum security.
What's Included
Everything in the Box — Ready to Train
🏗️
Elite Commercial Power Rack Frame1 piece11-gauge 3mm steel · 75×75mm box section uprights · chip-resistant matte black powder coat · pre-drilled footplates for optional floor bolting
🪝
Reinforced J-Hooks2 pieces — 1 pairHeavy-duty J-hook brackets with protective inner lining — cushions bar knurling and prevents damage to both the hook and barbell during re-racking
🛡️
Safety Spotter Bars2 pieces — 1 pairHeavy-duty horizontal catch bars — set one hole below your lowest working range to catch the bar if you fail a rep during solo bench press, squat or overhead press
💪
Multi-Grip Pull-Up Bar1 pieceMultiple hand positions — wide overhand, narrow overhand, neutral (parallel) and angled grips — for complete lat, bicep and upper back development from a single overhead bar
🦾
Adjustable Dip Station1 pieceMounts to the rack uprights — parallel bar dips for tricep and lower chest development. Adjustable width to suit different shoulder widths and grip preferences
🔗
Resistance Band Pegs4 piecesWelded base pegs for attaching resistance bands to the bar — enables accommodating resistance training for developing explosive strength through the full range of each lift
Key Features
Commercial-Grade From Frame to Footplate
🔩
11-Gauge 3mm Steel Frame75×75mm box section uprights — commercial specification steel that stays completely rigid under 450kg+ loading. Zero flex, zero wobble during heavy compound lifts
⚖️
450kg+ Tested Load CapacityRated and tested for heavy squats, rack pulls, bench press and overhead press. Supports powerlifting-level loads without frame deformation or J-hook movement under load
🦺
Reinforced J-Hooks with Protective LiningThe protective inner lining on each J-hook absorbs bar impact during re-racking and prevents knurling from scoring the hook surface — extends the life of both the rack and your barbell
🛡️
Heavy-Duty Safety Spotter BarsThe safety catch system that makes solo heavy training possible — set them one hole below your lowest safe range and train to failure without a spotter present
💪
Multi-Grip Pull-Up BarWide, narrow, neutral and angled grip positions on a single bar — target different portions of the lats, biceps and upper back without switching attachments or equipment
🦾
Adjustable Dip StationMounts to the uprights to add a full parallel bar dip station to the rack — chest-forward for lower pec activation or upright for tricep isolation, with width adjustment for different shoulder spans
🔗
4 Resistance Band PegsBase-mounted band pegs allow accommodating resistance — banded squats, banded bench and banded deadlifts increase resistance through the strongest range of the lift for developing explosive power
🔩
Pre-Drilled Footplates — Floor Bolt ReadyThe 180kg frame weight provides excellent standalone stability. Pre-drilled footplate holes allow optional floor bolting for maximum security during dynamic movements such as kipping pull-ups
✨
Chip-Resistant Matte Black Powder CoatCommercial-grade powder coating holds up under heavy daily use — bars, collars and plates striking the frame do not chip or flake the finish under normal training conditions
Serious home gym owners — 11-gauge commercial steel and 450kg+ load rating means this rack grows with your strength rather than becoming a limiting factor as loads increase
PT studios and commercial facilities — chip-resistant finish, reinforced J-hooks and heavy-duty spotter bars are rated for daily multi-user loading in high-traffic strength environments
Powerlifters and strength athletes — 450kg+ rated capacity covers elite-level squat, bench and deadlift training; band pegs support accommodating resistance methods used in advanced programming
Bodybuilders and hypertrophy athletes — multi-grip pull-up bar and adjustable dip station add complete upper body pulling and pushing bodyweight training alongside barbell work
Functional athletes and CrossFit training — kipping pull-ups, toes-to-bar, muscle-up progressions and banded movements are all supported by the multi-grip bar and band peg system
Anyone upgrading from a budget rack — if your current rack flexes, wobbles or lacks the height adjustment resolution needed for your training, this is the rack that ends the compromises
Delivery & Installation
🚚Australia-Wide FreightTracked heavy freight to Sydney, Melbourne, Brisbane, Adelaide, Perth & regional areas. Securely palletised for damage-free transit
🏪Depot Pickup AvailableSydney (Milperra NSW) · Melbourne · Brisbane · Adelaide depots — contact us to arrange collection
🔧Installation AvailableProfessional assembly available in select locations — contact us after ordering to check availability in your area
Frequently Asked Questions
Common Questions
11-gauge steel is 3mm thick — the commercial standard for heavy-duty power racks. Budget racks use 12–14 gauge (1.5–2mm), which flexes under heavy loads, producing wobble and noise during lifts. The Elite Commercial Power Rack's 11-gauge 75×75mm frame stays completely rigid under 450kg+ loading. This matters most at maximum effort — when you are at your heaviest squats and rack pulls, you need a frame that gives you zero movement, not one that shifts under load.
The rack is 215.5cm tall, 169cm wide and 145cm deep. We recommend a minimum ceiling clearance of 230–240cm for comfortable pull-up and overhead movement. Most standard Australian residential garages have 2.4m ceilings — sufficient for the rack height with clearance for pull-ups. Measure your ceiling height before ordering and check for overhead obstacles such as garage door tracks, light fittings or structural beams.
The Elite Commercial Power Rack has a 450kg+ tested load capacity. This covers squats, rack pulls, bench press and overhead press at elite powerlifting loads. The J-hooks, spotter bars and frame are all rated to this capacity. If you are working at extreme loads above this range for competition powerlifting, contact us to discuss suitability for your specific programming.
The 180kg unit weight provides substantial stability without floor bolting — the rack will not move during standard barbell training. However, floor bolting is strongly recommended for dynamic movements such as kipping pull-ups, toes-to-bar, muscle-up progressions and any training involving sudden directional force changes. The footplates feature pre-drilled holes for standard floor anchor bolts — hardware and installation method will depend on your floor type (concrete, timber, rubber).
Yes — that is exactly what the safety spotter bars are for. Set the spotter bars one hole below your lowest safe range of motion for each exercise. Perform a dry run with an empty bar to confirm the bars sit correctly before loading up. With the spotter bars correctly positioned, you can train squats, bench press and overhead press to failure without a training partner present — the bar lands on the arms, not on you.
The multi-grip pull-up bar offers wide overhand, narrow overhand, neutral (parallel) and angled grip positions. Wide overhand targets lat width and teres major. Narrow or neutral grip shifts more load onto the biceps and lower lats. The angled grips offer a wrist-friendly transition between pronated and neutral. All variations are accessible from a single bar without changing any attachments.
The four resistance band pegs are welded to the base of the rack frame. Loop a resistance band over the peg and attach the other end to the barbell. As you lift, the band tension increases through the top of the movement — the strongest portion of the lift — adding extra resistance where you are biomechanically most capable. This is called accommodating resistance and is used to develop explosive power and overcome sticking points in squats, bench and deadlifts.
Yes. The 11-gauge commercial steel frame, 450kg+ load rating, chip-resistant powder coat and reinforced J-hooks and spotter bars are all engineered for daily multi-user loading in commercial environments. The rack is used by PT studios, school gyms and commercial strength facilities across Australia. Contact us if you need multiple units for a facility fitout — volume pricing may be available.
The rack comes complete with J-hooks, spotter bars, pull-up bar, dip station and band pegs — everything except the barbell, weight plates and a bench. For bench press you will need an adjustable bench positioned inside the rack. For squats and overhead press you can train with just the rack and a loaded barbell. See the frequently bought together section below for compatible benches, barbells and weight plates.
Better Price. Better Service. 24-Hour Dispatch. > While other sellers keep you waiting with "pre-orders" and slow freight, we dispatch from our Sydney warehouse within 24 hours. Whether you are in Melbourne, Brisbane, or Adelaide, we ensure your gear is on the road immediately. In Sydney? Our expert team provides affordable assembly so your gym is ready to use the day it arrives. Get commercial-grade quality from an Australian-owned team that moves as fast as you do.
24/7 Gym Equipment
Others Gym Seller
24-Hour Dispatch Australia-Wide
Affordable Assembly Sydney Metro
Stock Ready to Ship
Click & Collect from Depots
Commercial-Grade Quality
Showroom Support & Advice
Bundle Discounts
Text columns with images
Strength Equipment
Power racks, Smith machines, functional trainers.
Cardio Equipment
Treadmills, rowers, bikes — built for home & commercial gyms.
Weights & Barbells
Olympic bars, plates, dumbbells & kettlebells.
Storage & Flooring
Racks, gym mats, flooring tiles — keep your space organised.
FAQs
Yes, 24/7 Gym Equipment delivers Australia-wide to all states and territories, including Sydney, Melbourne, Brisbane, Adelaide, Perth, Hobart, Darwin, and Canberra. We use trusted freight partners to ensure your equipment arrives safely. Sydney metro customers also have the option of professional in-home installation or direct warehouse pick-up.
We accept all major credit and debit cards, PayPal, Zip Pay, and PayPal Pay in 4. Buy-now-pay-later options like Zip and PayPal Pay in 4 make it easy to invest in quality gym equipment for your home gym or commercial facility without paying the full amount upfront.
Delivery costs for gym equipment in Australia depend on the size and weight of the product and your location. Lightweight items and smaller orders are generally more affordable to ship, while large commercial gym machines may require a custom freight quote. You can calculate your exact shipping cost at checkout, or contact our team directly for a tailored delivery quote.
All gym equipment sold by 24/7 Gym Equipment includes a manufacturer's warranty. Warranty periods and coverage vary depending on the product — from strength machines and functional trainers to cardio equipment and weights. Full warranty details are listed on each individual product page so you know exactly what is covered before you buy.
Yes, professional gym equipment assembly is available for customers in the Sydney metro area at an affordable rate. For customers in Melbourne, Brisbane, Adelaide, Perth, and other locations across Australia, all equipment is shipped flat-packed with detailed, step-by-step assembly instructions included.
We offer a 14-day money-back guarantee. Simply return the product in original condition (return freight costs apply).
We offer depot pick-up at locations in Sydney, Melbourne, Brisbane and Adelaide. This is a great option if you want to avoid freight costs or need your equipment quickly. Simply select "Depot Pick-Up" at checkout and choose your nearest city.
Yes, most gym equipment sold by 24/7 Gym Equipment is commercial-grade, built to meet the demands of commercial gyms, fitness studios, PT studios, and high-use training environments. We also offer a range of compact, high-quality home gym equipment suitable for residential customers, apartment gyms, and garage setups across Australia.
Choosing a selection results in a full page refresh.
Opens in a new window.
Jun Y.
Wonderful mat at a reasonably good
Wonderful mat at a reasonably good price!
Commercial Gym Flooring - Black (1mx1mx15mm)
Rich
Thank god I found this and it's local. So sick of reading about bodgy workmanship or crap customer service...nd that's after paying a fortune for something you thought was quality. This bench is a beast. Looks like you could ride to battle in it yet it's easy to put together and move with the wheels. No it's not foldaway: it's an incline bench not a picnic table. I can lift with confidence knowing it's not going to wobble or buckle.
Sam easy going and helpful, I picked it up the next morning. They deliver too. Cheers.
Commercial Adjustable Weight Bench-OK9101D
Jayson C.
These dumbbells exemplify the outstanding quality you’d expect from all 247 Gym Equipment products. I bought them specifically for their ability to handle variable weights, ideal for exercises like chest presses, shoulder raises, and rows. To expand their versatility, I added six 5kg machine Olympic iron plates, which has been a fantastic choice—they easily convert the set into 10kg, 20kg, or even 30kg dumbbells. However, I’d caution against using plates heavier than 5kg. One review noted they are a perfect alternative to hex dumbbells, even though the plates can be a bit too wide.
Olympic Dumbbell Handle 50mm – Chrome Gym Bar for Home & Commercial Use
Gerhard M.
Great product and very convenient as tou just mix one packet to 600ml water. I use these at work and when out mountain biking.
Love the mix pack as you have a good variety of flavours.
Thorzt Sugar-Free Electrolyte Solo Shot - Mixed Flavours 50 x 3g
G25 Multifunctional Gym from “24/7 Gym Equipment”.
G25 Gym from 24/7 Gym Equipment. Precision, Quality, Smooth. Solid and Beautiful to look at means 100% satisfaction. Installation is lengthy but worth the trouble to appreciate the quality and how good it is. Very happy with my purchase and definitely recommend over the competition.
24/7 were on point, very flexible and nothing was an issue. Sam is equally a genuine salesperson without the pushing hype to sell. He listens and fits in with you.
