247 Gym Equipment
Elite 20KG Olympic Power Barbell – 907KG (2000LB) Capacity
Elite 20KG Olympic Power Barbell907KG (2000LB) Capacity, Hard Chrome Finish
The Elite 20kg Olympic Power Barbell is built for training environments where the bar gets used every day and needs to hold up to it. Manufactured from 210,000 PSI tensile strength steel and rated to 907kg (2000lb), it is designed for heavy squats, bench press, deadlifts, and confident Olympic lifting in commercial gyms, PT studios, and serious home setups across Australia.
Where this bar earns its place over a standard Olympic barbell is the combination of a hard chrome finish for corrosion resistance, an 8 needle bearing sleeve system for smooth, consistent rotation, and a passive centre knurl that adds secure back contact for heavy squats without compromising comfort for mixed training.
Read on for the full specification, an honest comparison against a standard 1500lb bar, and answers to the questions we are asked most often about this barbell.
What Comes With Your Barbell
Built For Heavy, High-Frequency Training
Why Higher Tensile Steel And Bearings Matter
Steel Strength and Bearing Rotation
Tensile strength describes how much force a steel bar can withstand before permanently bending. At 210,000 PSI, this bar is built with a higher grade of steel than many standard Olympic bars, which matters most in commercial and institutional settings where the same bar is loaded heavily, day after day. The 8 needle bearing sleeve system (rather than a bushing setup) lets the sleeves rotate smoothly and independently of the shaft, reducing the twisting force transferred to your wrists during fast Olympic lifts while still holding stable under a heavy squat or deadlift.
Elite 2000LB Bar vs A Standard 1500LB Bar
| Feature | Standard 1500LB Bar | Elite 2000LB Bar |
|---|---|---|
| Tensile strength | 150,000 to 190,000 PSI | 210,000 PSI |
| Rotation system | Bushings or fewer bearings | 8 needle bearings |
| Centre knurl | Often missing | Included (passive) |
| Finish | Zinc or decorative chrome | Hard chrome |
| Max rated load | Approximately 680KG | 907KG (2000LB) |
Technical Specifications
| Bar Weight | 20KG |
| Total Length | 2200mm |
| Shaft Diameter | 28.5mm |
| Tensile Strength | 210,000 PSI |
| Rotation System | 8 needle bearings |
| Max Load Capacity | 907KG (2000LB) |
| Sleeve Diameter | 50mm, fits Olympic plates |
| Finish | Hard chrome |
| Knurl Pattern | Dual marks with passive centre knurl |
| Warranty | To confirm |
| Dispatch Timeframe | To confirm |
Pros and Cons
- Higher tensile strength steel than a typical standard bar, built to withstand daily heavy loading
- 907KG (2000LB) rating gives significant headroom above typical training loads
- 8 needle bearings give a genuinely smooth, consistent spin for Olympic lifting
- Hard chrome finish resists rust in humid or coastal conditions
- Passive centre knurl adds squat security without excessive shin or neck bite
- Higher specification steel and finish generally sit above entry-level barbell pricing
- 907KG rating is well beyond what most home lifters will ever need, so it may be more bar than a casual user requires
- Collars are not confirmed as included, so factor this into your order
- Warranty and dispatch timeframe are not yet confirmed
Who Is This Barbell For
- Commercial gym operatorsNeeding a bar built to withstand daily, high-frequency use across many members.
- PT studios and strength coachesWanting one bar that handles both heavy compound lifts and Olympic lifting technique work.
- Schools and institutional training facilitiesNeeding a durable barbell rated well above standard training loads.
- Serious home gym ownersBuilding a long-term strength setup and wanting a bar that will not need replacing as training loads increase.
- PowerliftersTraining heavy squats, bench press, and deadlifts who want secure knurling and a stiff, high-tensile shaft.
- Olympic weightliftersWanting reliable, fast sleeve rotation for snatches and clean and jerks under a heavy-duty frame.
Is This The Right Bar For You?
If you are training casually at moderate weights and do not need a bar rated to commercial-use loads, a standard Olympic barbell would likely suit your budget better without leaving capacity unused. If you specifically need the 25mm shaft used in women's competition weightlifting, browse our full barbell range to find a bar matched to that shaft diameter instead.
Olympic vs Standard, And What Actually Matters
For most home and commercial gyms in Australia, a 20kg 50mm Olympic barbell is the long-term choice. Olympic barbells fit 50mm Olympic weight plates and bumper plates, sit correctly in standard power racks, and use stronger sleeves than 25mm or 30mm standard bars. If your priority is heavy squats, bench press, and deadlifts, look for high tensile steel and secure knurling. If Olympic lifts are the focus, consistent sleeve rotation matters more. This bar is built to support both, combining a high load rating with an 8 needle bearing system.
Inspect Before You Buy
Getting Your Barbell
Related Products
Common Questions About This Barbell
Elite 20KG Olympic Power Barbell – 907KG (2000LB) Capacity
You can receive the package between July 18 and July 20
Elite 20KG Olympic Power Barbell907KG (2000LB) Capacity, Hard Chrome Finish
The Elite 20kg Olympic Power Barbell is built for training environments where the bar gets used every day and needs to hold up to it. Manufactured from 210,000 PSI tensile strength steel and rated to 907kg (2000lb), it is designed for heavy squats, bench press, deadlifts, and confident Olympic lifting in commercial gyms, PT studios, and serious home setups across Australia.
Where this bar earns its place over a standard Olympic barbell is the combination of a hard chrome finish for corrosion resistance, an 8 needle bearing sleeve system for smooth, consistent rotation, and a passive centre knurl that adds secure back contact for heavy squats without compromising comfort for mixed training.
Read on for the full specification, an honest comparison against a standard 1500lb bar, and answers to the questions we are asked most often about this barbell.
What Comes With Your Barbell
Built For Heavy, High-Frequency Training
Why Higher Tensile Steel And Bearings Matter
Steel Strength and Bearing Rotation
Tensile strength describes how much force a steel bar can withstand before permanently bending. At 210,000 PSI, this bar is built with a higher grade of steel than many standard Olympic bars, which matters most in commercial and institutional settings where the same bar is loaded heavily, day after day. The 8 needle bearing sleeve system (rather than a bushing setup) lets the sleeves rotate smoothly and independently of the shaft, reducing the twisting force transferred to your wrists during fast Olympic lifts while still holding stable under a heavy squat or deadlift.
Elite 2000LB Bar vs A Standard 1500LB Bar
| Feature | Standard 1500LB Bar | Elite 2000LB Bar |
|---|---|---|
| Tensile strength | 150,000 to 190,000 PSI | 210,000 PSI |
| Rotation system | Bushings or fewer bearings | 8 needle bearings |
| Centre knurl | Often missing | Included (passive) |
| Finish | Zinc or decorative chrome | Hard chrome |
| Max rated load | Approximately 680KG | 907KG (2000LB) |
Technical Specifications
| Bar Weight | 20KG |
| Total Length | 2200mm |
| Shaft Diameter | 28.5mm |
| Tensile Strength | 210,000 PSI |
| Rotation System | 8 needle bearings |
| Max Load Capacity | 907KG (2000LB) |
| Sleeve Diameter | 50mm, fits Olympic plates |
| Finish | Hard chrome |
| Knurl Pattern | Dual marks with passive centre knurl |
| Warranty | To confirm |
| Dispatch Timeframe | To confirm |
Pros and Cons
- Higher tensile strength steel than a typical standard bar, built to withstand daily heavy loading
- 907KG (2000LB) rating gives significant headroom above typical training loads
- 8 needle bearings give a genuinely smooth, consistent spin for Olympic lifting
- Hard chrome finish resists rust in humid or coastal conditions
- Passive centre knurl adds squat security without excessive shin or neck bite
- Higher specification steel and finish generally sit above entry-level barbell pricing
- 907KG rating is well beyond what most home lifters will ever need, so it may be more bar than a casual user requires
- Collars are not confirmed as included, so factor this into your order
- Warranty and dispatch timeframe are not yet confirmed
Who Is This Barbell For
- Commercial gym operatorsNeeding a bar built to withstand daily, high-frequency use across many members.
- PT studios and strength coachesWanting one bar that handles both heavy compound lifts and Olympic lifting technique work.
- Schools and institutional training facilitiesNeeding a durable barbell rated well above standard training loads.
- Serious home gym ownersBuilding a long-term strength setup and wanting a bar that will not need replacing as training loads increase.
- PowerliftersTraining heavy squats, bench press, and deadlifts who want secure knurling and a stiff, high-tensile shaft.
- Olympic weightliftersWanting reliable, fast sleeve rotation for snatches and clean and jerks under a heavy-duty frame.
Is This The Right Bar For You?
If you are training casually at moderate weights and do not need a bar rated to commercial-use loads, a standard Olympic barbell would likely suit your budget better without leaving capacity unused. If you specifically need the 25mm shaft used in women's competition weightlifting, browse our full barbell range to find a bar matched to that shaft diameter instead.
Olympic vs Standard, And What Actually Matters
For most home and commercial gyms in Australia, a 20kg 50mm Olympic barbell is the long-term choice. Olympic barbells fit 50mm Olympic weight plates and bumper plates, sit correctly in standard power racks, and use stronger sleeves than 25mm or 30mm standard bars. If your priority is heavy squats, bench press, and deadlifts, look for high tensile steel and secure knurling. If Olympic lifts are the focus, consistent sleeve rotation matters more. This bar is built to support both, combining a high load rating with an 8 needle bearing system.
Inspect Before You Buy
Getting Your Barbell
Related Products
Common Questions About This Barbell
🚚 Shipping
Australia-wide delivery
- Under 40 kg: Shipped via our standard courier partners.
- 40 kg and above: Shipped on a pallet via freight carriers.
- Tail-lift delivery: Available for residential addresses without forklift access.
- Approx. packaged weight: 50 kg (varies by product/configuration).
Depot & Pick-up Options
- Nearest-depot option: We have 500+ freight depots across Australia and will allocate the closest depot for convenient pick-up.
- Depot pick-up (capital cities): $200 flat fee in Sydney, Melbourne, Brisbane & Adelaide (up to 300 kg).
Installation
- Sydney Metro installation: Offered — contact us to book.
- Note: Installation, assembly, and call-out fees are non-refundable.
Secure Packing All items are securely packed on pallets for safe, damage-free transit.
💬 Looking for the best shipping rate? We always try to find you the most cost-effective option. 👉 WhatsApp us or Email us to get a tailored quote.
🎉 Limited-Time Offer: Enjoy Free Sydney Metro Delivery on all orders over $2,500. Fast and reliable delivery straight to your door.
Pay with
Your transaction is protected with advanced security measures to keep your information confidential
Why Choose 24/7 Gym Equipment?
Better Price. Better Service. 24-Hour Dispatch. > While other sellers keep you waiting with "pre-orders" and slow freight, we dispatch from our Sydney warehouse within 24 hours. Whether you are in Melbourne, Brisbane, or Adelaide, we ensure your gear is on the road immediately. In Sydney? Our expert team provides affordable assembly so your gym is ready to use the day it arrives. Get commercial-grade quality from an Australian-owned team that moves as fast as you do.
Text columns with images
Strength Equipment
Power racks, Smith machines, functional trainers.
Cardio Equipment
Treadmills, rowers, bikes — built for home & commercial gyms.
Weights & Barbells
Olympic bars, plates, dumbbells & kettlebells.
Storage & Flooring
Racks, gym mats, flooring tiles — keep your space organised.
FAQs
Yes, 24/7 Gym Equipment delivers Australia-wide to all states and territories, including Sydney, Melbourne, Brisbane, Adelaide, Perth, Hobart, Darwin, and Canberra. We use trusted freight partners to ensure your equipment arrives safely. Sydney metro customers also have the option of professional in-home installation or direct warehouse pick-up.
We accept all major credit and debit cards, PayPal, Zip Pay, and PayPal Pay in 4. Buy-now-pay-later options like Zip and PayPal Pay in 4 make it easy to invest in quality gym equipment for your home gym or commercial facility without paying the full amount upfront.
Delivery costs for gym equipment in Australia depend on the size and weight of the product and your location. Lightweight items and smaller orders are generally more affordable to ship, while large commercial gym machines may require a custom freight quote. You can calculate your exact shipping cost at checkout, or contact our team directly for a tailored delivery quote.
All gym equipment sold by 24/7 Gym Equipment includes a manufacturer's warranty. Warranty periods and coverage vary depending on the product — from strength machines and functional trainers to cardio equipment and weights. Full warranty details are listed on each individual product page so you know exactly what is covered before you buy.
Yes, professional gym equipment assembly is available for customers in the Sydney metro area at an affordable rate. For customers in Melbourne, Brisbane, Adelaide, Perth, and other locations across Australia, all equipment is shipped flat-packed with detailed, step-by-step assembly instructions included.
We offer a 14-day money-back guarantee. Simply return the product in original condition (return freight costs apply).
We offer depot pick-up at locations in Sydney, Melbourne, Brisbane and Adelaide. This is a great option if you want to avoid freight costs or need your equipment quickly. Simply select "Depot Pick-Up" at checkout and choose your nearest city.
Yes, most gym equipment sold by 24/7 Gym Equipment is commercial-grade, built to meet the demands of commercial gyms, fitness studios, PT studios, and high-use training environments. We also offer a range of compact, high-quality home gym equipment suitable for residential customers, apartment gyms, and garage setups across Australia.
