Premium J-Hooks & Safety Spotter Arms, 4-Piece Barbell Safety Set

$510.00 $395.00

You can receive the package between June 09 and June 11

Fast delivery Same day dispatch
📦 Archerfield Brisbane Depot 📦 Derrimut Melbourne Depot
Ready for pick up in 1 business day

Note for personalization

In Stock — Sydney Warehouse 🔧 XF10 (XC10) Compatible 📐 50×70 Uprights | 20mm Pins 🛡️ 4-Piece Safety Set 🏋️ J-Hooks + Spotter Arms 🚚 Australia-Wide Delivery

Premium J-Hooks & Safety Spotter Arms — 4-Piece Barbell Safety Set For XF10 (XC10) Functional Trainer Smith Machine All-in-One | Solo Training Safety | Australia

The Premium J-Hook & Safety Spotter Arm Set is a complete 4-piece barbell safety system for the XF10 (XC10) Functional Trainer Smith Machine All-in-One. The set includes one pair of heavy-duty J-hooks for barbell racking and unracking, and one pair of safety spotter arms with a protective catch surface to stop the bar if you fail a rep. Both pieces pin directly into the XF10 and G6S upright system (50mm x 70mm uprights) at any height position — no tools, no modification. Built from commercial-grade steel with a matte black powder-coat finish matched to the XF10 frame, this set is the essential safety foundation for solo barbell training on squats, bench press, overhead press and rack pulls.

🛡️
Train heavy. Train alone. Train safely. J-hooks and spotter arms are not optional safety extras — they are the system that makes solo barbell training to failure possible. Set your J-hooks at the correct unrack height and your spotter arms one hole below your lowest safe range. The bar lands on the arms if you can't complete the rep — not on you.
🔗
Compatible Machine This 4-piece set is designed specifically for the XF10 (XC10) Functional Trainer Smith Machine All-in-One. Both J-hooks and spotter arms pin directly into the XF10 numbered upright hole system (50mm x 70mm uprights) at any height position — no drilling or modification required. Contact us before ordering if you are unsure which machine you own.
4PCS Complete Set
2 J-Hooks Included
2 Spotter Arms Included
MULTI Height Positions

What's in the Set

2 J-Hooks + 2 Spotter Arms — What Each Does

🪝
J-Hooks
1 Pair — 2 Pieces

J-hooks are the barbell catch brackets that hold the bar at your starting (unrack) position. You load the bar, set the J-hooks at the right height, unrack the bar to begin your set, and re-rack it when finished. The hook profile catches the bar collar securely between sets.

  • Sets the barbell starting height for each exercise
  • Holds the bar securely between sets and during loading
  • Pin-adjustable to any upright position on the XF10
  • Protective inner liner prevents bar knurling damage
  • Used for squats, bench press, overhead press & rack pulls
🛡️
Safety Spotter Arms
1 Pair — 2 Pieces

Spotter arms are horizontal catch bars set just below your lowest working range. If you fail a rep, you lower the bar onto the spotter arms rather than being trapped under it. They are the safety net that makes training to failure without a spotter possible.

  • Catches the bar at the bottom of a failed rep
  • Set one hole below your lowest safe range of motion
  • Raised safety lip prevents bar rolling off during a catch
  • Bolt-lock collar eliminates lateral movement under load
  • Multi-hole adjustment — precise height setting for each exercise
Why buy this set rather than J-hooks or spotter arms separately?
J-hooks and spotter arms are always used together — one positions the bar, the other catches it. Purchasing the 4-piece set ensures the finish, fit and pin dimensions are matched to the XF10 frame as a system. It also means you have both components ready to configure for any exercise from day one — no sourcing parts individually or discovering a mismatch after purchase.

How to Set Up for Safe Solo Training

4 Steps to Heavy Solo Barbell Work

1
Set the J-Hooks at Your Unrack Height Pin the J-hooks at the height where you can comfortably unrack and re-rack the barbell with a slight knee bend. The bar should be reachable without having to stretch or stand on toes — typically just below shoulder height for squats, or at arm extension for bench press.
2
Set the Spotter Arms One Hole Below Your Bottom Range Unrack the bar without weight and perform the movement to your deepest safe position. Set the spotter arms one upright hole below that point. The bar should clear the arms throughout your full working range but make contact if you fail and need to set the bar down.
3
Lock the Bolt Collars on the Spotter Arms Tighten the bolt-lock collars on both spotter arms firmly. Check both arms are at the same height position and level before loading the bar. An uneven pair of spotter arms can cause the bar to tip sideways during a catch — always verify both sides match.
4
Dry Run — Then Load and Train Unrack the bar with no weight and run through the full movement range. Confirm the bar clears the spotter arms throughout and contacts them cleanly at the bottom if you were to fail. Once confirmed, load up and train with confidence.

Key Features

Premium Build — Every Detail Counts

🏗️
Commercial-Grade Heavy-Duty Steel Both J-hooks and spotter arms are built from heavy-duty steel rated for the sudden shock load of a failed barbell rep at maximum working weight — not lightweight home gym hardware
🛡️
Protective Inner Liner — J-Hooks The J-hook catch surface is lined with a protective material that cushions the bar during re-racking and prevents knurling damage to both the barbell and the hook surface under repeated loading cycles
🛑
Raised Safety Lip — Spotter Arms Each spotter arm features a raised front lip that prevents the barbell rolling or sliding forward off the catch surface during a failed rep — critical on bench press where the bar can shift forward under eccentric load
🔩
Bolt-Lock Collar — Spotter Arms The upright connection on each spotter arm uses a bolt-lock collar that clamps the arm firmly to the frame with zero lateral play — the arm stays exactly where set, even under sudden eccentric bar catch loads
📐
Multi-Position Height Adjustment Both J-hooks and spotter arms pin into the XF10 numbered upright hole system at any height — configure precisely for each exercise and each user's range of motion rather than a rough approximation
✨
Matched Matte Black Finish Powder-coated matte black finish matched to the XF10 (XC10) machine frame — the set looks like an integrated part of the machine rather than an aftermarket add-on

What You Can Train Solo With This Set

Exercises Made Safe by J-Hooks + Spotter Arms

Upper Body

  • Barbell bench press — flat
  • Barbell bench press — incline
  • Barbell overhead press (seated or standing)
  • Close-grip bench press (tricep focus)
  • Pin press (partial range overload)
  • Barbell floor press (low catch position)

Lower Body & Full Body

  • Barbell back squat
  • Barbell front squat
  • Barbell pause squat
  • Rack pull (partial deadlift from pins)
  • Barbell good morning
  • Barbell hip thrust (low arm position)

Specifications

Technical Details

Set Contents 2× J-hooks (1 pair) + 2× safety spotter arms (1 pair) — 4 pieces total
Compatible Machine XF10 (XC10) Functional Trainer Smith Machine All-in-One
Mount Type Pin-in upright holes — both J-hooks and spotter arms
Compatible Upright Size 50mm x 70mm rectangular uprights
Hole Size (Pin Diameter) 20mm
Spotter Arm Lock Bolt-lock collar — zero lateral movement under load
Spotter Arm Safety Feature Raised front lip — prevents bar roll-off during catch
J-Hook Inner Surface Protective liner — cushions bar and prevents knurling damage
Height Adjustment Multi-position — any upright pin hole on XF10 uprights
Construction Commercial-grade heavy-duty steel
Finish Matte black powder coat — matched to XF10 (XC10) frame
Sold As Complete 4-piece set — J-hooks and spotter arms together
Delivery Australia-wide — Sydney, Melbourne, Brisbane, Adelaide, Perth & regional

Who Is This For?

The Right Set For

  • Solo trainers lifting heavy on the XF10 — J-hooks and spotter arms are the safety system that makes training to failure on squats, bench and press possible without a training partner present
  • XF10 owners upgrading or replacing hardware — if your current J-hooks or spotter arms are worn, damaged or you want a matched premium set, this is the correct compatible replacement for the XF10 (XC10)
  • PT studios and commercial facilities running the XF10 — clients train unsupervised between sessions; this complete set provides the catch system that makes the rack side of the XF10 genuinely safe for independent use
  • Strength and powerlifting athletes — training to failure on compound movements requires a reliable safety catch system; the bolt-lock collar and raised spotter lip on this set are built for the forces involved in a real failed rep under maximum load
  • Home gym owners who train without a spotter — the most common reason home gym users avoid heavy pressing and squatting is the absence of a catch system. This set eliminates that limitation.

Frequently Asked Questions

Common Questions

The set includes 4 pieces total: 1 pair of J-hooks (2 pieces) and 1 pair of safety spotter arms (2 pieces). All four pieces are compatible with the XF10 (XC10) Functional Trainer Smith Machine All-in-One and pin into the machine uprights at any height position.
J-hooks hold the barbell at your starting (unrack) position — you lift the bar off the J-hooks to begin a set and re-rack it when finished. Spotter arms are set below your working range as a safety catch — if you fail a rep and cannot complete the lift, you lower the bar onto the spotter arms. Both are essential for safe solo barbell training. J-hooks without spotter arms means you have no catch if you fail a rep. Spotter arms without J-hooks means you have no way to rack and unrack the bar correctly.
No — J-hooks and spotter arms are set at different heights. J-hooks are set at the height where you comfortably unrack and re-rack the bar. Spotter arms are set below the J-hooks — one hole below your lowest working range of motion. The gap between J-hook height and spotter arm height is your full working range. Always do a dry run with no weight to confirm the setup before loading the bar.
The XF10 (XC10) Smith machine has its own integrated safety lock hooks on the bar itself that engage at any point in the movement by rotating the bar — these provide the catch function for guided Smith machine exercises independently. The J-hooks and spotter arms in this set are for free barbell training through the rack system — squats, bench press and overhead press using a standard Olympic barbell on the J-hooks. You do not need spotter arms when using the Smith machine side.
The correct height differs by exercise. For bench press: lie on your bench under the bar and lower it to your chest — the spotter arms should be set so the bar just clears them at your chest and contacts them if you set it down. Typically 1–2 holes below J-hook height. For squats: the spotter arms need to be low enough to allow you to reach your full squat depth — usually around parallel or just above. The arms should catch the bar when you sink below your sticking point and cannot stand back up. Always verify with a dry run using an empty bar before adding weight.
The J-hooks are sized for standard Olympic barbells with a 50mm sleeve diameter — which covers the vast majority of Olympic bars used for squats, bench press and overhead press. If you are using a specialty bar with a different sleeve profile, contact us to confirm fitment before ordering. The hook depth and liner are designed to hold the bar securely without the bar rocking or shifting between reps.
Both J-hooks and spotter arms are built from commercial-grade heavy-duty steel rated for the working loads used on the XF10 machine under typical strength training conditions. The spotter arms are specifically designed to absorb the sudden impact load of a failed barbell rep — which is a significantly higher force than a controlled re-rack. If you are planning extreme loading (400kg+) for powerlifting competition training, contact us to discuss suitability. For all standard gym and commercial training use cases, this set is rated for the task.
A bench is required for barbell bench press — the J-hooks and spotter arms position the bar but you need a flat or adjustable bench to lie on underneath. For squats, overhead press and rack pulls no bench is needed — you stand inside the rack formed by the XF10 uprights and work directly from the J-hooks. An adjustable bench is one of the most common additions purchased alongside this set for XF10 owners who want to perform the full range of barbell pressing exercises.
When you reach failure on a squat with spotter arms set correctly, continue to lower the bar in a controlled descent until it contacts the spotter arms — do not drop it suddenly. The arms absorb the load and you step or duck out from under the bar. If you lose control suddenly, the arms will catch the bar regardless, but a controlled descent onto the arms causes less shock to the machine frame and reduces noise. Never attempt to dump the bar forward or backward — lower it straight down onto the arms. This is why the dry run with an empty bar is important: it confirms the arms are at the right height to catch the bar before your sticking point.
Complete Your Setup

Frequently Bought Together

🏋️ XF10 (XC10) All-in-One Gym Station → ⚫ Olympic Weight Plates → 🏋️ Olympic Barbell → 🟫 Rubber Gym Flooring →

J-Hook & Spotter Arm Set Delivery Areas — Australia:
Sydney (NSW) · Parramatta · Bankstown · Liverpool · Penrith · Blacktown · Campbelltown · Bondi · Chatswood · Castle Hill · Northern Beaches · Manly · North Sydney · Mosman · Inner West · Sutherland Shire · Lower North Shore · Eastern Suburbs · Ryde · Melbourne (VIC) · Richmond · Brunswick · Essendon · Frankston · Dandenong · Geelong · Ballarat · Brisbane (QLD) · Fortitude Valley · Gold Coast · Sunshine Coast · Toowoomba · Rockhampton · Cairns · Adelaide (SA) · Glenelg · Norwood · Perth (WA) · Canberra (ACT) · Wollongong (NSW) · Newcastle (NSW) · Hobart (TAS) · Darwin (NT)

🚚 Shipping

Australia-wide delivery

  • Under 40 kg: Shipped via our standard courier partners.
  • 40 kg and above: Shipped on a pallet via freight carriers.
  • Tail-lift delivery: Available for residential addresses without forklift access.
  • Approx. packaged weight: 50 kg (varies by product/configuration).

Depot & Pick-up Options

  • Nearest-depot option: We have 500+ freight depots across Australia and will allocate the closest depot for convenient pick-up.
  • Depot pick-up (capital cities): $200 flat fee in Sydney, Melbourne, Brisbane & Adelaide (up to 300 kg).

Installation

  • Sydney Metro installation: Offered — contact us to book.
  • Note: Installation, assembly, and call-out fees are non-refundable.

Secure Packing All items are securely packed on pallets for safe, damage-free transit.

💬 Looking for the best shipping rate? We always try to find you the most cost-effective option. 👉 WhatsApp us or Email us to get a tailored quote.

🎉 Limited-Time Offer: Enjoy Free Sydney Metro Delivery on all orders over $2,500. Fast and reliable delivery straight to your door.

Pay with

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Your transaction is protected with advanced security measures to keep your information confidential

4-piece barbell safety set including a pair of J-hooks and a pair of bolt-lock safety spotter arms for the XF10 XC10 functional trainer.

Premium J-Hooks & Safety Spotter Arms, 4-Piece Barbell Safety Set

$510.00 $395.00
$510.00 $395.00

Why Choose 24/7 Gym Equipment?

Better Price. Better Service. 24-Hour Dispatch. > While other sellers keep you waiting with "pre-orders" and slow freight, we dispatch from our Sydney warehouse within 24 hours. Whether you are in Melbourne, Brisbane, or Adelaide, we ensure your gear is on the road immediately. In Sydney? Our expert team provides affordable assembly so your gym is ready to use the day it arrives. Get commercial-grade quality from an Australian-owned team that moves as fast as you do.

24/7 Gym Equipment
Others Gym Seller
24-Hour Dispatch Australia-Wide
Affordable Assembly Sydney Metro
Stock Ready to Ship
Click & Collect from Depots
Commercial-Grade Quality
Showroom Support & Advice
Bundle Discounts

Text columns with images

Strength Equipment

Power racks, Smith machines, functional trainers.

Cardio Equipment

Treadmills, rowers, bikes — built for home & commercial gyms.

Weights & Barbells

Olympic bars, plates, dumbbells & kettlebells.

Storage & Flooring

Racks, gym mats, flooring tiles — keep your space organised.

FAQs

Yes, 24/7 Gym Equipment delivers Australia-wide to all states and territories, including Sydney, Melbourne, Brisbane, Adelaide, Perth, Hobart, Darwin, and Canberra. We use trusted freight partners to ensure your equipment arrives safely. Sydney metro customers also have the option of professional in-home installation or direct warehouse pick-up.

We accept all major credit and debit cards, PayPal, Zip Pay, and PayPal Pay in 4. Buy-now-pay-later options like Zip and PayPal Pay in 4 make it easy to invest in quality gym equipment for your home gym or commercial facility without paying the full amount upfront.

Delivery costs for gym equipment in Australia depend on the size and weight of the product and your location. Lightweight items and smaller orders are generally more affordable to ship, while large commercial gym machines may require a custom freight quote. You can calculate your exact shipping cost at checkout, or contact our team directly for a tailored delivery quote.

All gym equipment sold by 24/7 Gym Equipment includes a manufacturer's warranty. Warranty periods and coverage vary depending on the product — from strength machines and functional trainers to cardio equipment and weights. Full warranty details are listed on each individual product page so you know exactly what is covered before you buy.

Yes, professional gym equipment assembly is available for customers in the Sydney metro area at an affordable rate. For customers in Melbourne, Brisbane, Adelaide, Perth, and other locations across Australia, all equipment is shipped flat-packed with detailed, step-by-step assembly instructions included.

We offer a 14-day money-back guarantee. Simply return the product in original condition (return freight costs apply).

We offer depot pick-up at locations in Sydney, Melbourne, Brisbane and Adelaide. This is a great option if you want to avoid freight costs or need your equipment quickly. Simply select "Depot Pick-Up" at checkout and choose your nearest city.

Yes, most gym equipment sold by 24/7 Gym Equipment is commercial-grade, built to meet the demands of commercial gyms, fitness studios, PT studios, and high-use training environments. We also offer a range of compact, high-quality home gym equipment suitable for residential customers, apartment gyms, and garage setups across Australia.