Functional Trainer Attachments
30 products
Sort by:
30 products
30 products
Rack Attachment In Stock Australia Wide Delivery
Leg Press Bracket for G9S Pro Floor-Level Leg Press Foot Plate Attachment
The Leg Press Bracket for G9S Pro is a floor-level attachment that mounts between the front uprights of a compatible G9S Pro rack, giving you a fixed, non-slip foot plate for floor-based leg press and pressing style movements. It turns the base of your G9S Pro into a compact leg press station without the floor space a standalone leg press machine requires.
The bracket clamps securely to the lower section of the rack, positioning the diamond-tread plate at a fixed floor-level height so you can lie back and press against it, using the rack's own cable and pulley system for resistance. This attachment is only compatible with the G9S Pro and cannot be used on its own.
Read on for what is included, how it mounts, and the exercises it supports on your G9S Pro.
1 PLATE Non-Slip Foot Plate
2 CLAMPS Upright Mounting Points
TBC KG Load Rating (To Confirm)
TBC MIN Install Time (To Confirm)
Compatibility: This attachment is only compatible with the G9S Pro rack system. It cannot be used on its own or with other rack systems.
What's Included
Mounting Bracket BarSteel bar with dual clamps for fixing across the front uprights
Non-Slip Foot PlateDiamond-tread plate for secure foot placement during presses
Clamp HardwareSecures the bracket to a compatible G9S Pro upright
Fitting InstructionsEverything needed for a straightforward install
Key Features
Floor-Level Leg Press PositionFixed low mounting point lets you lie back and press against the plate from the floor.
Non-Slip Diamond Tread PlateTextured surface keeps feet secure through heavier press sets.
Dual Clamp MountingBracket clamps to both front uprights for a stable, fixed base.
Uses Existing Cable SystemWorks with the G9S Pro's own pulley and cable resistance rather than needing a separate weight stack.
Compact AttachmentAdds leg press style training without the floor space of a standalone leg press machine.
Wide Plate SurfaceSized to support both double-leg and single-leg press positions.
Build quality: The Leg Press Bracket for G9S Pro uses a steel bracket bar and clamp construction with a textured, non-slip plate surface. Exact frame gauge, steel finish and plate dimensions are to confirm at this time. We will not publish specific figures for these until they have been verified against the current production batch.
Exercises You Can Perform
Floor-Based Pressing
- Floor leg press
- Single-leg press
- Calf press against the plate
- Glute bridge press variations
Supporting Movements
- Banded leg press with the G9S Pro cable system
- Assisted hamstring press work
- Core-engaged pressing holds
- Rehab-style controlled leg presses
| Model | Leg Press Bracket for G9S Pro |
| Type | Rack-mounted floor-level leg press plate attachment |
| Compatibility | G9S Pro rack system only, not compatible with other systems |
| Mounting Style | Dual clamp bracket fixed across the front uprights |
| Plate Surface | Diamond-tread, non-slip finish |
| Resistance Source | Uses the G9S Pro's existing cable and pulley system |
| Overall Dimensions | To confirm |
| Plate Dimensions | To confirm |
| Load Rating | To confirm |
| Attachment Weight | To confirm |
| Finish | To confirm |
| Warranty | To confirm |
Pros
- Adds floor-based leg press training to a G9S Pro you already own
- Non-slip plate surface for secure foot placement
- Uses the rack's existing cable system rather than a separate weight stack
- Compact compared with a standalone leg press machine
Cons
- Only compatible with the G9S Pro, cannot be used as a standalone unit
- Requires an existing G9S Pro with cable and pulley system fitted
- Fixed floor-level mounting height is not adjustable
- Plate surface will show wear over time with heavy daily use
Who Is This For
-
G9S Pro ownersWho want floor-based leg press training without a separate machine.
-
PT studios programming lower body sessionsWho need a quick way to add leg press variations to client programming.
-
Home gym owners with limited floor spaceWho want to extend G9S Pro functionality rather than add another machine.
-
Lifters working through rehab or controlled pressing workWho want a stable, fixed plate for slow, controlled leg press movements.
-
Small commercial gyms building out their rack stationsWho want more exercise variety from existing G9S Pro units.
Who should not buy: If you do not already own a compatible G9S Pro, this attachment has nothing to mount to and a standalone leg press machine would suit you better. If you need an adjustable-height leg press position, note that this bracket mounts at a fixed floor-level height.
The problem this solves: Many home gyms and small studios do not have room for a dedicated leg press machine alongside a rack. The Leg Press Bracket for G9S Pro mounts to the rack you already have, giving you a stable, non-slip foot plate for floor-based leg press training using the rack's own cable resistance, without the extra floor space a standalone machine needs.
Visit Our Showroom 10/202 Milperra Road, Milperra NSW 2214 Mon-Fri 9am-5pm | Saturday by appointment only Get Directions
Contact Us Phone: 1300 247 888 WhatsApp: +61 412 029 000 Email: sales@247gymequipment.com.au
Depot Pickup Derrimut VIC and Archerfield QLD depots available Contact us to arrange collection
Delivery
Australia-Wide Delivery Ships to all states, with depot pickup available in Sydney, Melbourne and Brisbane.
Installation Self-fit attachment. Compatible upright size and fitting details to confirm at checkout.
Dispatch Timeframe Dispatch timeframe to confirm at time of order.
Related Products
Browse rack and machine attachments → Browse power racks and squat racks → Browse functional trainers →
Frequently Asked Questions
It is suitable for home gyms, PT studios and small commercial setups where it is being added to a compatible G9S Pro already on site.
No. The Leg Press Bracket for G9S Pro is only compatible with the G9S Pro rack system and cannot be used as a standalone unit.
Each unit includes the mounting bracket bar, the non-slip foot plate, the clamp hardware and fitting instructions required to attach it to a compatible G9S Pro.
The bracket uses the G9S Pro's existing cable and pulley system for resistance rather than requiring a separate weight stack.
No, the bracket mounts at a fixed floor-level height across the front uprights. It does not have an adjustable mounting position.
The attachment is designed for straightforward self-fitting once it arrives. It clamps onto the front uprights and is secured with the supplied hardware, so no specialist assembly is required in most cases.
Yes. The Leg Press Bracket for G9S Pro ships Australia-wide, with depot pickup available in Sydney, Melbourne and Brisbane and showroom collection available from Milperra NSW.
Yes, the showroom at 10/202 Milperra Road, Milperra NSW 2214 is open Monday to Friday 9am to 5pm, with Saturday visits by appointment only. Call 1300 247 888 ahead of a visit to confirm current floor stock.
Warranty terms for this attachment are to confirm. Contact our sales team on 1300 247 888 or sales@247gymequipment.com.au for current warranty details before ordering.
You will need a compatible G9S Pro with its cable and pulley system already fitted, since the Leg Press Bracket is a mounted attachment rather than a standalone machine.
Yes, the plate has a diamond-tread, non-slip surface designed to keep your feet secure through heavier press sets.
For G9S Pro owners who want floor-based leg press training without the cost and floor space of a separate machine, it is a practical, targeted addition rather than a major equipment upgrade.
24/7 Gym Equipment supplies the Leg Press Bracket for G9S Pro and other rack attachments Australia-wide, with delivery available to Sydney, Melbourne, Brisbane, Adelaide, Perth, Canberra, Gold Coast, Newcastle, Wollongong, Hobart and regional areas across the country. Visit our Milperra showroom in Sydney or arrange depot pickup in Derrimut, Victoria, or Archerfield, Queensland.
Rack Attachment In Stock Australia Wide Delivery
Knee Holder Foam Roller for XG75 & XG90 Rack-Mounted Leg Roller and Knee Hold-Down Attachment
The Knee Holder Foam Roller for XG75 & XG90 is a compact rack attachment built for seated pull-down work and single-leg strength training. It mounts directly to a compatible XG75 or XG90 upright using a quick-fit J-hook bracket, giving you a stable knee hold-down point without needing a dedicated lat tower seat.
Fitted with two swivelling foam rollers, the attachment holds your knees firmly in place during seated pulldowns and rows, and doubles as a leg roller for single-leg squats, Bulgarian split squats and lunge variations. It is a practical way to add pull-down style training to an XG75 power rack or XG90 functional trainer you already own, particularly in home gyms and PT studios where space for a separate lat tower is limited.
If you are setting up an XG75 or XG90 station and want to know exactly how this attachment fits, mounts and performs, the sections below cover what is included, how it installs, and which exercises it supports.
2 ROLLERS Swivel Foam Pads
1 BRACKET J-Hook Mount
TBC KG Load Rating (To Confirm)
TBC MIN Install Time (To Confirm)
What's Included
Knee Holder Roller AssemblyDual foam-padded rollers on a swivel joint
J-Hook Mounting BracketQuick-fit hook design for XG75 or XG90 upright mounting
Locking Adjustment KnobSecures the roller arm at your chosen height
Fitting Hardware and InstructionsEverything needed for a straightforward install
Key Features
Dual Swivel RollersRotating foam pads reduce friction against the knees during seated pulling movements.
J-Hook Quick MountHooks onto a compatible XG75 or XG90 upright without permanent bolting in most configurations.
Adjustable Lock KnobAllows the roller arm to be positioned and secured to suit different user heights.
Dual Purpose DesignWorks as a knee hold-down for pull-downs and as a leg roller for single-leg movements.
Vinyl-Covered PaddingWipeable outer covering over the foam rollers for durability and hygiene.
Space-Saving AttachmentAdds pull-down functionality to an existing XG75 or XG90 build rather than requiring a separate machine.
Build quality: The Knee Holder Foam Roller for XG75 & XG90 uses a steel bracket and roller arm construction with foam-padded, vinyl-covered rollers. Exact frame gauge, steel finish and roller foam density are to confirm at this time. We will not publish specific figures for these until they have been verified against the current production batch.
Exercises You Can Perform
Seated Pull-Down Style
- Seated lat pulldown (knee hold-down)
- Seated cable row with knee brace
- Straight-arm pulldown, seated
- Close-grip seated row
Leg Roller Use
- Single-leg squats
- Bulgarian split squats
- Rear-foot elevated lunges
- Balance and stability lunges
| Model | Knee Holder Foam Roller for XG75 & XG90 |
| Type | Rack-mounted knee holder and leg roller attachment |
| Mounting Style | J-hook, hooks onto compatible XG75 or XG90 upright |
| Roller Configuration | 2x swivelling foam rollers on a hinged arm |
| Roller Covering | Vinyl-covered foam padding |
| Adjustment | Height and angle adjustable via locking knob |
| Compatible Uprights | XG75 and XG90 rack uprights, exact upright dimensions to confirm before ordering |
| Overall Dimensions | To confirm |
| Roller Diameter / Length | To confirm |
| Load Rating | To confirm |
| Attachment Weight | To confirm |
| Finish | To confirm |
| Warranty | To confirm |
Pros
- Adds seated pull-down functionality to an XG75 or XG90 you already own
- Doubles as a leg roller for single-leg strength work
- Quick J-hook mounting with no complex assembly
- Compact footprint compared with a standalone lat tower
Cons
- Only compatible with XG75 and XG90 upright sizes, to confirm before ordering
- Requires an existing XG75 or XG90 build to attach to
- Foam roller covering will wear over time with heavy daily use
- Not a replacement for a full seated row or lat pulldown machine
Who Is This For
-
XG75 power rack ownersWho want seated pull-down capability without buying a separate lat tower.
-
XG90 functional trainer ownersWho want a seated brace point for cable pulldowns and rows.
-
PT studios running rack-based sessionsWho need a quick way to add knee hold-down pulldowns to client programming.
-
Lifters working on single-leg strengthWho want a dedicated roller for Bulgarian split squats and rear-foot elevated lunges.
-
Small commercial gyms with limited floor spaceWho want to extend XG75 or XG90 functionality rather than add another machine.
Who should not buy: If you do not already own a compatible XG75 power rack or XG90 functional trainer, this attachment has nothing to mount to and a standalone lat tower or cable machine would suit you better. If you need a heavy-duty, high-frequency commercial leg roller for a large PT facility, it is worth confirming load ratings and compatible upright sizes with our team before ordering.
The problem this solves: Many home gyms and small studios have an XG75 or XG90 build but no dedicated seat for pull-downs, and knees tend to lift off the floor during heavier pulls. The Knee Holder Foam Roller for XG75 & XG90 gives you a fixed brace point that mounts to the rack you already have, so you get a stable pull-down position without buying and housing an additional machine.
Visit Our Showroom 10/202 Milperra Road, Milperra NSW 2214 Mon-Fri 9am-5pm | Saturday by appointment only Get Directions
Contact Us Phone: 1300 247 888 WhatsApp: +61 412 029 000 Email: sales@247gymequipment.com.au
Depot Pickup Derrimut VIC and Archerfield QLD depots available Contact us to arrange collection
Delivery
Australia-Wide Delivery Ships to all states, with depot pickup available in Sydney, Melbourne and Brisbane.
Installation Self-fit attachment. Compatible upright size and fitting details to confirm at checkout.
Dispatch Timeframe Dispatch timeframe to confirm at time of order.
Related Products
Browse rack and machine attachments → XG75 power rack, build your own setup → Browse functional trainers →
Frequently Asked Questions
It is suitable for home gyms, PT studios and small commercial setups where it is being added to a compatible XG75 power rack or XG90 functional trainer already on site. Confirmed load ratings for higher-frequency commercial use are available on request.
The attachment mounts directly onto an existing XG75 or XG90 upright and does not require additional floor space beyond the footprint of your rack. Exact clearance needed for the roller arm to swing into position is to confirm for your specific configuration.
Each unit includes the dual roller knee holder assembly, the J-hook mounting bracket, a locking adjustment knob and the fitting hardware required to attach it to a compatible XG75 or XG90 upright.
The attachment is designed for straightforward self-fitting once it arrives. It hooks onto the upright and is secured with the supplied locking knob, so no specialist assembly is required in most cases.
Yes. The Knee Holder Foam Roller for XG75 & XG90 ships Australia-wide, with depot pickup available in Sydney, Melbourne and Brisbane and showroom collection available from Milperra NSW.
Yes, the showroom at 10/202 Milperra Road, Milperra NSW 2214 is open Monday to Friday 9am to 5pm, with Saturday visits by appointment only. Call 1300 247 888 ahead of a visit to confirm current floor stock.
Warranty terms for this attachment are to confirm. Contact our sales team on 1300 247 888 or sales@247gymequipment.com.au for current warranty details before ordering.
It is a solid option if you already own a compatible XG75 or XG90 build and want seated pull-down capability without buying a separate lat tower. If you need a dedicated high-volume commercial leg roller, it is worth comparing load ratings and confirming compatibility with our team first.
You will need a compatible XG75 power rack or XG90 functional trainer with a pulley and cable system already fitted, since the Knee Holder Foam Roller for XG75 & XG90 is a knee hold-down and leg roller attachment rather than a standalone machine.
For anyone with an existing XG75 or XG90 build who wants seated pull-down and single-leg training options without the cost and floor space of a separate machine, it is a practical, targeted purchase rather than a major equipment upgrade.
Compatible upright sizes are to confirm. Contact our sales team with your XG75 or XG90 upright dimensions before ordering to make sure the J-hook bracket will fit correctly.
Yes. The roller arm can be repositioned and secured with the locking adjustment knob, allowing it to be set to suit different user heights and leg lengths.
24/7 Gym Equipment supplies the Knee Holder Foam Roller for XG75 & XG90 and other rack attachments Australia-wide, with delivery available to Sydney, Melbourne, Brisbane, Adelaide, Perth, Canberra, Gold Coast, Newcastle, Wollongong, Hobart and regional areas across the country. Visit our Milperra showroom in Sydney or arrange depot pickup in Derrimut, Victoria, or Archerfield, Queensland.
Rack Attachment In Stock Australia Wide Delivery
Knee Holder Foam Roller for XF10 Rack-Mounted Leg Roller and Knee Hold-Down Attachment
The Knee Holder Foam Roller for XF10 is a compact rack attachment built for seated pull-down work and single-leg strength training. It mounts directly to a compatible power rack or functional trainer upright using a quick-fit J-hook bracket, giving you a stable knee hold-down point without needing a dedicated lat tower seat.
Fitted with two swivelling foam rollers, the attachment holds your knees firmly in place during seated pulldowns and rows, and doubles as a leg roller for single-leg squats, Bulgarian split squats and lunge variations. It is a practical way to add pull-down style training to a rack you already own, particularly in home gyms and PT studios where space for a separate lat tower is limited.
If you are setting up a functional trainer or power rack station and want to know exactly how this attachment fits, mounts and performs, the sections below cover what is included, how it installs, and which exercises it supports.
2 ROLLERS Swivel Foam Pads
1 BRACKET J-Hook Mount
TBC KG Load Rating (To Confirm)
TBC MIN Install Time (To Confirm)
What's Included
Knee Holder Roller AssemblyDual foam-padded rollers on a swivel joint
J-Hook Mounting BracketQuick-fit hook design for rack upright mounting
Locking Adjustment KnobSecures the roller arm at your chosen height
Fitting Hardware and InstructionsEverything needed for a straightforward install
Key Features
Dual Swivel RollersRotating foam pads reduce friction against the knees during seated pulling movements.
J-Hook Quick MountHooks onto a compatible rack upright without permanent bolting in most configurations.
Adjustable Lock KnobAllows the roller arm to be positioned and secured to suit different user heights.
Dual Purpose DesignWorks as a knee hold-down for pull-downs and as a leg roller for single-leg movements.
Vinyl-Covered PaddingWipeable outer covering over the foam rollers for durability and hygiene.
Space-Saving AttachmentAdds pull-down functionality to an existing rack rather than requiring a separate machine.
Build quality: The Knee Holder Foam Roller for XF10 uses a steel bracket and roller arm construction with foam-padded, vinyl-covered rollers. Exact frame gauge, steel finish and roller foam density are to confirm at this time. We will not publish specific figures for these until they have been verified against the current production batch.
Exercises You Can Perform
Seated Pull-Down Style
- Seated lat pulldown (knee hold-down)
- Seated cable row with knee brace
- Straight-arm pulldown, seated
- Close-grip seated row
Leg Roller Use
- Single-leg squats
- Bulgarian split squats
- Rear-foot elevated lunges
- Balance and stability lunges
| Model | Knee Holder Foam Roller for XF10 |
| Type | Rack-mounted knee holder and leg roller attachment |
| Mounting Style | J-hook, hooks onto compatible rack upright |
| Roller Configuration | 2x swivelling foam rollers on a hinged arm |
| Roller Covering | Vinyl-covered foam padding |
| Adjustment | Height and angle adjustable via locking knob |
| Compatible Uprights | To confirm |
| Overall Dimensions | To confirm |
| Roller Diameter / Length | To confirm |
| Load Rating | To confirm |
| Attachment Weight | To confirm |
| Finish | To confirm |
| Warranty | To confirm |
Pros
- Adds seated pull-down functionality to a rack you already own
- Doubles as a leg roller for single-leg strength work
- Quick J-hook mounting with no complex assembly
- Compact footprint compared with a standalone lat tower
Cons
- Only compatible with certain rack upright sizes, to confirm before ordering
- Requires an existing rack or functional trainer to attach to
- Foam roller covering will wear over time with heavy daily use
- Not a replacement for a full seated row or lat pulldown machine
Who Is This For
-
Home gym owners with a power rackWho want seated pull-down capability without buying a separate lat tower.
-
PT studios running rack-based sessionsWho need a quick way to add knee hold-down pulldowns to client programming.
-
Lifters working on single-leg strengthWho want a dedicated roller for Bulgarian split squats and rear-foot elevated lunges.
-
Small commercial gyms with limited floor spaceWho want to extend rack functionality rather than add another machine.
-
Functional trainer ownersWho want a seated brace point for cable pulldowns and rows.
Who should not buy: If you do not already own a compatible rack or functional trainer, this attachment has nothing to mount to and a standalone lat tower or cable machine would suit you better. If you need a heavy-duty, high-frequency commercial leg roller for a large PT facility, it is worth confirming load ratings and compatible upright sizes with our team before ordering.
The problem this solves: Many home gyms and small studios have a rack or functional trainer but no dedicated seat for pull-downs, and knees tend to lift off the floor during heavier pulls. The Knee Holder Foam Roller for XF10 gives you a fixed brace point that mounts to the rack you already have, so you get a stable pull-down position without buying and housing an additional machine.
Visit Our Showroom 10/202 Milperra Road, Milperra NSW 2214 Mon–Fri 9am–5pm | Saturday by appointment only Get Directions
Contact Us Phone: 1300 247 888 WhatsApp: +61 412 029 000 Email: sales@247gymequipment.com.au
Depot Pickup Derrimut VIC and Archerfield QLD depots available Contact us to arrange collection
Delivery
Australia-Wide Delivery Ships to all states, with depot pickup available in Sydney, Melbourne and Brisbane.
Installation Self-fit attachment. Compatible rack size and fitting details to confirm at checkout.
Dispatch Timeframe Dispatch timeframe to confirm at time of order.
Related Products
Browse rack and machine attachments → Browse power racks and squat racks → Browse functional trainers →
Frequently Asked Questions
It is suitable for home gyms, PT studios and small commercial setups where it is being added to a compatible rack or functional trainer already on site. Confirmed load ratings for higher-frequency commercial use are available on request.
The attachment mounts directly onto an existing rack upright and does not require additional floor space beyond the footprint of your rack. Exact clearance needed for the roller arm to swing into position is to confirm for your specific rack model.
Each unit includes the dual roller knee holder assembly, the J-hook mounting bracket, a locking adjustment knob and the fitting hardware required to attach it to a compatible upright.
The attachment is designed for straightforward self-fitting once it arrives. It hooks onto the rack upright and is secured with the supplied locking knob, so no specialist assembly is required in most cases.
Yes. The Knee Holder Foam Roller for XF10 ships Australia-wide, with depot pickup available in Sydney, Melbourne and Brisbane and showroom collection available from Milperra NSW.
Yes, the showroom at 10/202 Milperra Road, Milperra NSW 2214 is open Monday to Friday 9am to 5pm, with Saturday visits by appointment only. Call 1300 247 888 ahead of a visit to confirm current floor stock.
Warranty terms for this attachment are to confirm. Contact our sales team on 1300 247 888 or sales@247gymequipment.com.au for current warranty details before ordering.
It is a solid option if you already own a compatible rack and want seated pull-down capability without buying a separate lat tower. If you need a dedicated high-volume commercial leg roller, it is worth comparing load ratings and confirming compatibility with our team first.
You will need a compatible power rack or functional trainer with a pulley and cable system already fitted, since the Knee Holder Foam Roller for XF10 is a knee hold-down and leg roller attachment rather than a standalone machine.
For anyone with an existing rack who wants seated pull-down and single-leg training options without the cost and floor space of a separate machine, it is a practical, targeted purchase rather than a major equipment upgrade.
Compatible upright sizes are to confirm. Contact our sales team with your rack's upright dimensions before ordering to make sure the J-hook bracket will fit correctly.
Yes. The roller arm can be repositioned and secured with the locking adjustment knob, allowing it to be set to suit different user heights and leg lengths.
24/7 Gym Equipment supplies the Knee Holder Foam Roller for XF10 and other rack attachments Australia-wide, with delivery available to Sydney, Melbourne, Brisbane, Adelaide, Perth, Canberra, Gold Coast, Newcastle, Wollongong, Hobart and regional areas across the country. Visit our Milperra showroom in Sydney or arrange depot pickup in Derrimut, Victoria, or Archerfield, Queensland.
In Stock Australia Wide Delivery Fits XG90 & G75
XG90 Core Trainer AttachmentClamp-Mount Landmine & T-Bar Handle Attachment
The XG90 Core Trainer Attachment turns your power rack upright into a rotational core and landmine training station. Instead of taking up extra floor space with a standalone landmine unit, this attachment clamps directly onto your rack post and gives you two ways to train: a single angled handle for landmine presses and rotational core work, and a T-bar style multi-grip handle for rows and anti-rotation holds.
It is purpose-built for the XG90 rack and also fits the G75 rack, so if you are running either of these frames at home, in a garage gym, or in a PT studio, this attachment adds landmine and rotational training without buying a separate base unit.
Below you will find the full specification, what is included in the box, honest pros and cons, and everything you need to know before you buy.
2 HANDLES Landmine + T-Bar Grip
2 RACKS XG90 & G75 Compatible
To Confirm KG Weight Capacity
To Confirm GAUGE Steel Frame Gauge
What Is Included
Pivoting landmine armAngled single-grip handle arm for landmine press and rotational core movements.
T-bar multi-grip handleDual-grip handle bar for T-bar style rows and anti-rotation core work.
Rack mounting clampBolt-secured clamp bracket that fits directly onto compatible XG90 and G75 rack uprights.
Fitting hardwareBolts and fittings required to mount the attachment to your rack. Full hardware list to confirm.
Key Features
Clamp-mount designAttaches directly to a compatible rack upright, so it does not need its own floor footprint.
Dual handle systemSwitch between the landmine-style single handle and the T-bar multi-grip handle depending on the exercise.
Rotational pivot armDesigned to move through a landmine-style arc for rotational presses, twists, and single-arm work.
Fits XG90 and G75One attachment, two compatible rack models, so it suits a wider range of existing 247 Gym Equipment setups.
Bolt-secured fittingThe clamp bracket bolts onto the rack upright for a secure, rattle-free connection during training.
Steel constructionBuilt from steel components with a black finish. Exact gauge and coating type to confirm.
Build quality: The XG90 Core Trainer Attachment is constructed from steel tube and bolts securely to your rack upright via the included clamp bracket. The pivoting arm and T-bar handle are designed to handle repeated rotational loading during landmine press, row, and core anti-rotation exercises. Exact steel gauge, finish specification, and rated weight capacity are to confirm and will be updated once fully verified.
Core and Rotational Exercise Library
Core & Rotational
- Standing landmine rotational twist
- Half-kneeling landmine rotation
- Landmine woodchopper
- Anti-rotation press hold
- Standing Pallof-style press
- Landmine side bend
Press, Row & Pull
- Single-arm landmine press
- Two-hand landmine press
- T-bar style row (handle attachment)
- Single-arm landmine row
- Landmine squat to press
- Staggered-stance landmine press
| Product | XG90 Core Trainer Attachment |
| Compatibility | XG90 rack, G75 rack |
| Handle configurations | Landmine-style single handle, T-bar multi-grip handle |
| Mounting type | Bolt-secured clamp bracket, fits to rack upright |
| Frame material | Steel, black finish |
| Steel gauge | To confirm |
| Weight capacity | To confirm |
| Attachment weight | To confirm |
| Dimensions | To confirm |
| Warranty | To confirm |
| Assembly required | Yes, bolts to rack upright on installation |
| Stock status | In stock, Australian stock, ships Australia-wide |
Pros
- Clamps onto your existing XG90 or G75 rack, so it does not need extra floor space.
- Two handle options in one attachment for landmine press, rows, and rotational core work.
- Compact way to add landmine-style training to a home or PT studio setup.
- Bolt-secured mounting for a stable connection during use.
Cons
- Only fits XG90 and G75 racks, so it is not a universal landmine attachment for other rack brands.
- Requires a barbell and rack already in place to get full use from the attachment.
- Some technical specifications, including weight capacity and steel gauge, are still to confirm.
- Basic hand tools and a few minutes of setup are needed to bolt the clamp to your upright.
Who Is This For
-
XG90 or G75 rack ownersAnyone already running an XG90 or G75 who wants to add landmine and rotational training without buying a standalone unit.
-
Home gym owners short on spaceBuyers who want landmine-style training but do not have room for a separate floor-mounted landmine base.
-
Personal trainers and PT studiosTrainers who want a quick way to add rotational core, anti-rotation, and single-arm work to client sessions.
-
Athletes training rotational powerLifters and athletes focused on rotational strength, core stability, and single-arm pressing patterns.
-
Garage gym owners building out their rackAnyone looking to expand what their existing rack can do with a single, rack-mounted attachment.
Who should not buy: if you do not own an XG90 or G75 rack, this attachment will not fit and a standalone floor-mounted landmine unit would suit you better. It is also not the right choice if you are looking for a dedicated cable or pulley-based core trainer, since this is a handle attachment built around barbell-based landmine and rotational movements.
The problem this solves: a lot of home gym owners want landmine press and rotational core training but do not want to dedicate floor space to a separate landmine base. Because the XG90 Core Trainer Attachment clamps directly onto your XG90 or G75 rack upright, you get landmine and T-bar style training from equipment you already own, without adding another freestanding unit to your setup.
Visit Our Showroom 10/202 Milperra Road, Milperra NSW 2214 Mon–Fri 9am–5pm | Saturday by appointment only | Sunday closed Get Directions
Contact Us Phone: 1300 247 888 WhatsApp: +61 412 029 000 Email: sales@247gymequipment.com.au
See It Fitted Ask our team to show you the XG90 Core Trainer Attachment fitted to an XG90 or G75 rack in the showroom.
Australia Wide Delivery Ships to metro and regional addresses across Australia.
Installation Fits to your existing XG90 or G75 rack using the included clamp and hardware. Professional installation availability to confirm.
Dispatch Timeframe Dispatch timeframe to confirm at time of order.
Related Products
Frequently Asked Questions
It is a clamp-mount rack attachment with two handle options, a landmine-style single handle and a T-bar multi-grip handle, used for landmine press, rows, and rotational core training directly from your rack upright.
The XG90 Core Trainer Attachment is designed to fit the XG90 rack and is also compatible with the G75 rack. It is not a universal fitting for other rack brands or upright profiles.
Yes. It suits home gyms, garage gyms, and PT studios that already have an XG90 or G75 rack, giving you landmine and rotational core training without a standalone unit.
Because it clamps onto your existing rack upright, it does not require its own floor footprint. You will still need the usual clearance around your rack to swing the handle through a full rotational range.
It includes the pivoting landmine arm with angled handle, the T-bar multi-grip handle, the rack mounting clamp, and the bolts and fittings needed to mount it to a compatible rack upright.
The attachment bolts on using the included clamp and hardware. Whether professional fitting is available at time of delivery is to confirm. Basic hand tools and a few minutes are typically all that is required.
Yes, the XG90 Core Trainer Attachment ships to metro and regional locations across Australia.
Yes, you can view the attachment fitted to an XG90 or G75 rack at our Milperra showroom, Monday to Friday 9am to 5pm, or Saturday by appointment only.
The rated weight capacity is to confirm. We will update this specification once it has been fully verified, so please contact our team if you need this figure before ordering.
Warranty terms are to confirm. Contact our team on 1300 247 888 or sales@247gymequipment.com.au for the current warranty information before you buy.
You can perform landmine presses, rotational twists, woodchoppers, anti-rotation holds, single-arm rows, and T-bar style rows using the two handle options included with this attachment.
Yes, the pivoting arm is designed to work with a standard barbell sleeved into it, landmine-style, so you will need a barbell already in your setup to use the press and rotational functions.
Australia-wide delivery: 24/7 Gym Equipment ships the XG90 Core Trainer Attachment to customers across Sydney, Melbourne, Brisbane, Adelaide, Canberra, the Gold Coast, Newcastle, Wollongong, Hobart, and regional areas throughout Australia. Visit our Milperra showroom in Sydney to see the attachment fitted to an XG90 or G75 rack in person.
Premium Treadmills for Home & Commercial Gyms - 24/7 Gym Equipment
Choosing The Right Attachment — Australia
Functional Trainer Attachments, Explained
Not sure which attachment fits your machine? 247 Gym Equipment stocks attachments for the XG75, XG90, XF10, G6S, G7S and G9S Pro functional trainers — jammer arms, lat pulldown and leg press attachments, cable bars, safety spotter arms and smaller fit-and-forget accessories. This page breaks down what fits what, then heads to the full range for specs and pricing.
22 Attachments In Stock
🚚 Ships Australia-Wide
📍 Milperra Warehouse
Quick Picker — By Machine
XG75 / XG90Shop →
XF10Shop →
G6S / G7S / G9S ProShop →
Best For BeginnersWeight Stack Load Horn
InstallationDIY — no tools needed
DispatchSydney Metro Same-Day
Compare All Attachments →
📞 Ask Which Fits Your Machine
01
Types Of Attachments
Strength & Movement Add-Ons
Jammer arms, lat pulldown, leg press, and leg extension/curl attachments — the way to add a genuinely new exercise to a machine you already own, without buying a second machine.
Safety & Support Attachments
J-hooks, safety spotter arms, knee holders and weight stack load horns — the fixes for training alone, holding position under load, or adding resistance beyond the stock stack.
Something Else In Mind?
Looking for an attachment not listed here, or unsure if something fits your specific machine? Get in touch and we'll confirm fitment before you order.
02
Which Attachment Is Right For You?
🆕 New To Your Machine?
If you've just set up an XG75, XG90, G7S or G9S Pro and want more exercise variety, jammer arms and the leg press attachment are the most requested first upgrades — both bolt onto existing uprights.
Shop Jammer Arms →🏋️ Training Alone At Home?
Barbell work without a spotter is genuinely safer with the right setup — our Premium J-Hooks & Safety Spotter Arms set for the XF10 gives you a catch point at the right height for squats, bench and overhead press.
Shop Safety Spotter Arms →📈 Maxed Out Your Weight Stack?
A Weight Stack Load Horn clips onto your existing selector pin and adds up to 80kg of extra resistance via standard Olympic plates — the cheapest way to keep progressing once you've outgrown the stock stack.
Shop Load Horn →🏢 Multiple Machines In One Facility?
Some attachments are cross-compatible across ranges — the Lat Pull Down Attachment fits both the G6S and XF10, and the Leg Press Attachment fits the XG90, XG75, XF10 and G6S — useful if your studio runs more than one model.
Shop Cross-Compatible →
03
Attachment Comparison
| Attachment | Fits | Adds | From |
|---|---|---|---|
| Jammer Arms | XG75, XG90, G7S, G9S Pro | Bilateral pressing & pulling | $330 |
| Lat Pull Down Attachment | G6S, XF10, XG75 | Seated lat pulldown station | $155 |
| Leg Press Attachment | XG90, XG75, XF10, G6S | Seated leg press | $170 |
| Leg Extension & Curl | XG75, XG90 | Quad & hamstring isolation | $510 |
| Hip Thrust Bench | G7S | Rack-mounted hip thrust platform | $220 |
| Cable Attachment Pack | XG90 | 4-piece bar set | $229 |
| Safety Spotter Arms & J-Hooks | XF10 | Solo barbell training safety | $395 |
| Weight Stack Load Horn | All pin-loaded trainers | +80kg extra resistance | $79 |
| Knee Holder Foam Roller | XG75, XG90, XF10 | Secure knee hold-down | $32 |
| Barbell Stow Rack | XG90, XG75 (G25) | Frame-mounted barbell storage | $59 |
Setting up the machine itself too? These attachments are designed to work with functional trainers and Smith machines and sit safely on rubber gym flooring rated for static and dropped loads. Browse the full equipment range to complete your setup.
Attachments Delivered Across Australia
Tracked freight from our Milperra NSW warehouse · Same-day dispatch Sydney Metro · Contact us for your best freight quote
Sydney
Melbourne
Brisbane
Perth
Adelaide
Canberra
Gold Coast
Newcastle
Wollongong
Regional AU
04
Attachments — Choosing FAQ
No — fitment depends on upright size and pin spacing, which differ between machine ranges. The XG75 and XG90 share compatible mounting points for most attachments, the XF10 uses its own 50×70mm upright with a 20mm pin system, and the G6S, G7S and G9S Pro each have their own fitment. Always check the "Compatible machine(s)" line on the product page before ordering.
Yes — every attachment ships with its own mounting hardware and fitting instructions. Most, like the leg press and lat pulldown attachments, use tool-free pin or clamp mounting and install in under an hour.
Yes — jammer arms are an aftermarket add-on for the XG75, XG90, G7S and G9S Pro that bolt onto existing uprights, opening up bilateral pressing, pushing and rotational movement patterns.
The Leg Press Bracket for G9S Pro ($62) and Weight Stack Load Horn ($79) are the most affordable options that genuinely add new training capability, rather than just solving a specific problem.
A Weight Stack Load Horn clips onto your machine's existing selector pin via a magnetic mount and lets you load standard Olympic plates on top of the stack — up to 80kg of additional resistance per horn.
Yes, if you're doing barbell lifts like squats, bench press or overhead press without a training partner. Our Premium J-Hooks & Safety Spotter Arms set for the XF10 gives you a catch point at the right height if a rep fails.
Some attachments are cross-compatible — the Lat Pull Down Attachment fits both the G6S and XF10, and the Leg Press Attachment fits the XG90, XG75, XF10 and G6S. Others, like the XG75 Lat Pulldown Attachment, are built for a single machine's rack dimensions.
Very little functionally — it's a full-size, fully upholstered unit built to the same commercial standard as a standalone machine. The difference is it mounts to your existing XG75 or XG90 instead of needing its own floor footprint.
Both — attachments like the Jammer Arms and Safety Spotter Arms sets use commercial-grade steel with powder-coat finishes built for repeated daily use, not just occasional home training.
Yes — all attachments ship Australia-wide from our Milperra, NSW warehouse. Smaller attachments ship as standard parcels, while larger items ship via freight.
Yes — call our Milperra, NSW showroom on 1300 247 888 or visit in person and our team can confirm fitment against your exact machine model before you buy.
Yes — the bars use standard swivel carabiner connections, so they'll fit any cable machine using the same carabiner-style attachment point, not just the XG90.
Not Sure Which Attachment Fits?
Tell us your machine model — we'll point you to the right attachment.
247 Gym Equipment — Functional trainer attachments for the XG75, XG90, XF10, G6S, G7S and G9S Pro. Delivering to Sydney Metro, Milperra, Bankstown, Liverpool, Parramatta, Sutherland, Inner West, Eastern Suburbs, North Shore, Northern Beaches and Western Sydney, plus Australia-wide freight. Address: 10/202 Milperra Road, Milperra NSW 2214. Phone: 1300 247 888. Email: sales@247gymequipment.com.au.
Australia's Most Trusted Gym Equipment Store
Why Choose 24/7 Gym Equipment ?
We deliver premium home and commercial gym equipment with unbeatable prices, expert advice, and fast nationwide shipping. Trusted by thousands of lifters across Australia. Set up your dream gym with confidence!
Featured collections
